• 대한치과교정학회지
• /
• 제53권5호
• /
• pp.298-306
• /
• 2023

Objective: Pain following the insertion of separators and archwires varies with age, sex, race, ethnicity, threshold, and health status. This study aimed to evaluate the characteristics of pain in orthodontic patients after the insertion of elastomeric separators, its effects on daily life, and its association with age and sex in a population not previously studied in this regard. Methods: A cross-sectional study of 130 patients undergoing orthodontic treatment included collecting data on demographics, pain experienced following the placement of separators, time of onset, duration, characteristics, change in dietary pattern or chewing side, intake of analgesics, and severity of pain on the Wong Baker's scale. The results are reported as counts and percentages. Associations between sex and age were evaluated using Pearson's chi-square test. Results: Among the 130 patients, 56.2% were 9-20 years old, 63.8% experienced pain following the insertion of separators, 22.9% had their first episode of pain at 4 hours, 56.6% experienced intermittent pain, and 37.3% experienced discomfort; 18.1% males and 81.9% females experienced pain following the insertion of separators. Pearson's chi-square test showed a significant association between pain and sex (P = 0.04). Most patients (37.3%) reported "hurts little more" for pain intensity on Wong Baker's scale and 21.7% reported all four quadrants as sites of pain. Conclusions: The pain experienced after separator insertion was associated with sex and age. Females experienced more pain than males and patients between the age range of 21 and 36 years suffered more pain during mastication than between 9 and 20 years old.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.253-265
• /
• 2023

In this research, the gene expression programming (GEP) technique was employed to provide a new model for predicting the maximum loading capacity of concrete-encased steel (CES) columns. This model was developed based on 96 CES column specimens available in the literature. The six main parameters used in the model were the compressive strength of concrete (f_c), yield stress of structural steel (f_ys), yield stress of steel rebar (f_yr), and cross-sectional areas of concrete, structural steel, and steel rebar (A_c, A_s and A_r respectively). The performance of the prediction model for the ultimate load-carrying capacity was investigated using different statistical indicators such as root mean square error (RMSE), correlation coefficient (R), mean absolute error (MAE), and relative square error (RSE), the corresponding values of which for the proposed model were 620.28, 0.99, 411.8, and 0.01, respectively. Here, the predictions of the model and those of available codes including ACI ITG, AS 3600, CSA-A23, EN 1994, JGJ 138, and NZS 3101 were compared for further model assessment. The obtained results showed that the proposed model had the highest correlation with the experimental data and the lowest error. In addition, to see if the developed model matched engineering realities and corresponded to the previously developed models, a parametric study and sensitivity analysis were carried out. The sensitivity analysis results indicated that the concrete cross-sectional area (A_c) has the greatest effect on the model, while parameter (f_yr) has a negligible effect.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.533-546
• /
• 2023

Cost-effective solutions provided by composite construction are gaining popularity which, in turn, promotes the appearance on the market of new types of composite sections that allow not only to take advantage of the synergy of steel and concrete working together at room temperature, but also to improve their behaviour at high temperatures. When combined with high performance materials, significant load-bearing capacities can be achieved even with reduced cross-sectional dimensions. Steel-reinforced concrete-filled steel tubular (SR-CFST) columns are one of these innovative composite sections, where an open steel profile is embedded into a CFST section. Besides the renowned benefits of these typologies at room temperature, the fire protection offered by the surrounding concrete to the inner steel profile, gives them an enhanced fire performance which delays its loss of mechanical capacity in a fire scenario. The experimental evidence on the fire behaviour of SR-CFST columns is still scarce, particularly when combined with high performance materials. However, it is being much needed for the development of specific design provisions that consider the use of the inner steel profile in CFST columns. In this work, a new experimental program on the thermo-mechanical behaviour of SR-CFST columns is presented to extend the available experimental database. Ten SR-CFST stub columns, with circular and square geometries, combining high strength steel and concrete were tested. It was seen that the circular specimens reached higher failure times than the square columns, with the failure time increasing both when high strength steel was used at the embedded steel profile and high strength concrete was used as infill. Finally, different proposals for the reduction coefficients of high performance materials were assessed in the prediction of the cross-sectional fire resistance of the SR-CFST columns.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.60-65
• /
• 2007

Local buckling behaviors of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been analyzed using experimental tests combined with theoretical and finite element analyses. For this analysis true stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing. True strains were also obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens reinforced by aluminum plates were employed for the bending test. The bending deformation behaviors up to the maximum load analyzed by the numerical simulation agreed well with experimental ones. After passing the maximum load, reinforcing plate hindering the local buckling of the tube beam was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed the most excellent bending capacity, which could be explained on the basis of the neutral axis shift and the local buckling deformation range.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.313-319
• /
• 2007

The effect of capillary cross-section geometry on evaporation is investigated in terms of the meniscus shape, evaporation rate and evaporation-induced flow for circular, square and rectangular cross-sectional capillaries. The shapes of water and ethanol menisci are not much different from each other in square and rectangular capillaries even though the surface tension of water is much larger than that of ethanol. On the other hand, the shapes of water and ethanol menisci are very different from each other in circular capillary. The averaged evaporation fluxes in circular and rectangular capillaries are measured by tracking the meniscus position. At a given position, the averaged evaporation flux in rectangular capillaries is much larger than that in circular capillary with comparable hydraulic diameter. The flow near the evaporating meniscus is also measured using micro-PIV, so that the rotating vortex motion is observed near the evaporating ethanol and methanol menisci except for the case of methanol meniscus in rectangular capillary. This difference is considered to be due to the existence of corner menisci at the four comers.

• 대한간호학회지
• /
• 제43권3호
• /
• pp.321-330
• /
• 2013

Purpose: This cross-sectional study was done to compare factors influencing young adolescents' aggression according to family structure. Methods: Participants were 680 young adolescents aged 11 to 15 years (113 in single father families, 136 in single mother families, 49 in grandparent families, and 382 in both-parent families). All measures were self-administered. Data were analyzed using SPSS 18.0 program and factors affecting young adolescents' aggression were analyzed by stepwise multiple regression. Results: Levels of young adolescents' aggression and all variables were significantly different among the four family structure groups. Factors influencing young adolescents' aggression were also different according to these 4 groups. For single father families, depression-anxiety and family hardiness significantly predicted the level of young adolescents' aggression (adjusted R square=.37, p<.001). For single mother families, depression-anxiety, gender, and friends' support significantly predicted the level of young adolescents' aggression (adjusted R square=.58, p<.001). For grandparent families, depression-anxiety and family support significantly predicted the level of young adolescents' aggression (adjusted R square=.58, p<.001). For both-parent families, depression-anxiety, family hardiness, and friends' support significantly predicted the level of young adolescents' aggression (adjusted R square=.48, p<.001). Conclusion: Nurses working with young adolescents should consider family structure-specific factors influencing aggression in this population.

• 자원ㆍ환경경제연구
• /
• 제10권2호
• /
• pp.217-234
• /
• 2001

The use of district heating is expanding very rapidly in Korea. High population densities and the relatively cold winters make district heating an economically attractive option. About 8 percent of Korean houses are already using district heating and the government is seeking to aggressively expand this number. It has set a target of 15 percent of the residential heat market to be met by district heating in the year 2001. The main purpose of this paper is to analyze the consumption behavior of households using district heating. By pooling time-series and cross-sectional data for 12 apartment complexes in Seoul area, a single demand function is estimated and used to forecast the amounts of heat demanded by the individual households. The results shows that the level of consumption varies among households, depending on the non-economic factors such as the installation of individual metering equipment and the volume of apartment building. When individual metering equipment is installed, the level of annual heat consumption per household declines, on average, about 22.1 Mcal per square meters, which is equivalent to 834 won per square meter in terms of heating expenditures. In case that the apartment building was built in more than 6 stories, annual consumption level reduces additionally about 17.3 Mcal per square meters and, thus, save the expenditures by 649 Won per square meters, compared to the opposite case.

• 한국보건간호학회지
• /
• 제25권1호
• /
• pp.73-83
• /
• 2011

Purpose: The purpose of this study was to investigate factors affecting health promoting lifestyle in nursing students. Methods: A descriptive cross-sectional study was done using a convenient sampling (n=682) in a three-year nursing college. The health promoting lifestyle was measured by the instrument of Walker's and self esteem was measured by the instrument of Rosenberg's. Data were analyzed by descriptive statistics, chi-square test, oneway ANOVA and Stepwise multiple regression. Results: The average score of health promoting lifestyle was 2.34. The score of psycho-social well-being subscale was higher than that of health promoting behavior subscale. The highest score was on the interpersonal relations subscale, and the lowest score was on the physical activity subscale. The self-esteem, mental health status, satisfaction with school life, school year, perceived economic status, and gender accounted for 31.9% of the variance of health promoting lifestyle. Conclusion: Self-esteem was the most powerful influencing variable of the health promoting lifestyle, and physical activity was the lowest score of the health promoting lifestyle subscale. Therefor nursing educators should consider to include a health promotion program with increasing self esteem and physical activity in the nursing curriculum.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.192-196
• /
• 2011

New method to encode multiple photonic features of Bragg type reflector on silicon wafer has been investigated. Multiple bit encodes of distributed Bragg reflector features have been prepared by electrochemical etching of crystalline silicon by using various square wave current densities. Optical characterization of multi-encoding of distributed Bragg reflectors on porous silicon was achieved by Ocean optics 2000 spectrometer for the search of possible applications of multiple bit encoding of distributed Bragg reflectors such as multiplexed assays and chemical sensors. The morphology and cross-sectional structure of multi-encoded distributed Bragg reflectors was investigated by field emission scanning electron micrograph.

• Transactions on Electrical and Electronic Materials
• /
• 제5권4호
• /
• pp.143-147
• /
• 2004

Surface defects and bulk defects on SOI wafers are studied. Two new metrologies have been proposed to characterize surface and bulk defects in epitaxial layer transfer (ELTRAN) wafers. They included the following: i) laser scattering particle counter and coordinated atomic force microscopy (AFM) and Cu-decoration for defect isolation and ii) cross-sectional transmission electron microscope (TEM) foil preparation using focused ion beam (FIB) and TEM investigation for defect morphology observation. The size of defect is 7.29 urn by AFM analysis, the density of defect is 0.36 /cm$^2$ at as-direct surface oxide defect (DSOD), 2.52 /cm$^2$ at ox-DSOD. A hole was formed locally without either the silicon or the buried oxide layer (Square Defect) in surface defect. Most of surface defects in ELTRAN wafers originate from particle on the porous silicon.