• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.481-486
• /
• 2001

ZnO thin films on glass substrate were depostied by RF magnetron reactive sputter with various argon/oxygen gas ratios and substrate temperatures. Crystallinities, surface morphologies, chemical compositions, and electrical properties of the films were investigated by XRD, SEM, XPS and electrometer(keithley 617). All films showed a strong preferred orientation along the c-axis on glass substrate, and the chemical stoichiometry was obtained at Ar/O$_2$.=50/50. The propagation velocity of ZnO SAW filter was about 2,590 m/sec and insertion loss was a minimum value of abut -21dB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• Journal of Surface Science and Engineering
• /
• v.33 no.2
• /
• pp.115-125
• /
• 2000

TiN films were deposited onto Stellite 6B alloy (Co base) by the reactive magnetron sputter ion plating. As the bias increases, TiN film changes from columnar structure to dense structure with great hardness and smooth surface due to densification and resputtering by ion bombardment. The content of oxygen and carbon impurities in the TiN film decreases greatly when the substrate bias is applied. The preferred orientation of the TiN films changes from (200) to (111) with decreasing $N_2$/Ar ratio, and from (200) to (111) and then (220) with increasing the substrate bias. The change of the preferred orientation is discussed in terms of surface energy and strain energy which are related to the impurity contents and the ion bombardment damage. The hardness of the TiN film increases with increasing compressive stress generated in the film by virtue of ion bombardment. It becomes as high as up to 3500kgf/mm$^2$ when an appropriate substrate bias is applied.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.34-38
• /
• 1997

This paper presents a joining method by using the silicon wafer in order to apply to joint to the 3-dimensional structures of semiconductor device, high-speed , high integration, micro machine, silicon integrated sensor, and actuator. In this study, the high atomic beam, stabilized by oxidation film and organic materials at the material surface, is investigated, and the purified is obtained by removing the oxidation film and pollution layer at the materials. And the unstable surface is obtained, which can be easily joined. In order to use the low temperatures for the joint method, the main subjects are obtained as follows: 1) In the case of the silicon wafer and the silicon wafer and the silicon wafer of alumina sputter film, the specimens can be jointed at 2$0^{\circ}C$, and the joining strength is 5Mpa. 2) The specimens can not always be joined at the room temperatures in the case of the silicon wafer and the silicon wafer of alumina sputter film.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.905-909
• /
• 2007

Crystalline and micro-structural characteristics of ZnO thin films which were deposited on p-Si(100) with cooling naturally down of pre-heated substrate during RF magnetron sputter deposition, were investigated by XRD and SEM in this paper. The film which was prepared on the substrate which was pre-heated to $400^{\circ}C$ before deposition and then cooled naturally down during deposition, showed the most outstanding c-axis preferred orientation. The ZnO thin film having the best crystalline result were applied to SMR type FBAR device and resonance properties of the device were investigated by network analyzer. It showed that resonance frequency was 2.05 GHz, return loss was -30.64 dB, quality factor was 3169 and electromechanical coupling factor was 0.4 %. This deposition method would be very useful for application of surface acoustic wave filter or film bulk acoustic wave resonator.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.15-20
• /
• 2008

A DC-magnetron inline sputter was established, and the influence of the base pressure on the structural characteristics of the ITO thin films was studied. When the inline sputter system was established and operated for ITO sputtering, its initial vacuum level did not go below $5\times10^{-6}$ torr. The vacuum leak test was conducted by measuring t he elapsed time until the vacuum level reached $1\times10^{-6}$ torr. The base pressure was successfully maintained at $1\times10^{-6}$ torr for 900 min, and the uniformity of the ITO film that had been deposited at this pressure significantly improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.341.2-341.2
• /
• 2014

산화물 반도체는 가시광선 영역인 380~780 nm 부근에서의 투과율이 80% 이상이고, 3.2 eV 이상의 band gap과 높은 mobility를 가지는 물질로서 투명한 스마트 창호필름이나 디스플레이에 유망한 물질로 연구되고 있다. 본 연구에서는 스마트 윈도우에 적용되는 높은 가시광 투과율과 적외선 차단을 위한 필름개발을 목적으로 산화물 반도체인 $TiO_2$ 물질을 RF Sputter를 이용하여 상온에서 박막성장을 하였다. Glass와 PET 위에 동시에 성장시켜 각각의 기판에 성장된 $TiO_2$ 박막의 물리적인 성질 등을 조사하였다. 측정은 Ellipsometry를 이용하여 광학적인 두께와 굴절률을 조사하였고 UV visible spectrometer를 통해 광학적인 투과도를 확인하였다. 100Watt 부터 RF power를 높여가며 Working Pressure 변화변 주었을 때 낮은 RF power와 Working Pressure에서 높은 가시광 투과율을 확인 할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.334.1-334.1
• /
• 2014

태양전지, 터치센서와 같이 투명한 전극(TCO: Transparent conducting oxide)이 필요로 하는 곳에는 금속 산화물 형태의 ITO, ZnO, FTO와 같은 투명 전극이 사용된다. 그중에서 FTO는 저렴한 가격과 높은 투과율, 낮은 저항으로 주목을 받고 있다. 뿐만아니라 FTO 박막은 다른 산화물 전도체에 비해 구부림에 강한 저항성을 보여 주고 있다. FTO 박막의 캐리어 전하 생성 원리는 F 원자가 O 원자의 자리를 치환하게 되면서 잉여 전자의 발생으로 전기가 흐를 수 있다. 아직까지는 화학적 조성비에 유리한 CVD를 이용한 증착 방법이 많이 사용되고 있다. 스퍼터 장비 역시 공정 가스에 따라 화학적 조성비 변화가 가능하고 CVD와 비교하여 공정이 간단하며 연속 공정이 쉽고 대면적 적용이 가능하다. 본 실험은 본사에서 R&D용으로 제작한 Daon-1000 S 장비를 사용하였으며 DaON-1000 S는 3개의 2" sputter gun이 장착 되어 있어 co-sputtering이 가능한 장비이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.154.1-154.1
• /
• 2014

Indium gallium zinc oxide (IGZO)는 차세대 디스플레이 평판 패널에 사용되는 반도체 화합물의 일종으로 최근 주목받고 있는 물질의 하나이다. 기존의 IGZO를 사용하여 박막을 증착한 뒤 표면 처리를 통해 박막의 특성 변화에 대한 연구들이 진행되어 왔으며, 기존의 연구들은 plasma 환경에 노출을 시켜 간접적인 plasma treatment를 통해 박막의 특성을 향상시켜 왔다. 본 연구에서는 기존의 plasma treatment에서 발견된 방식인 ion beam treatment를 통해 플라즈마를 직접적으로 표면에 조사하여 박막의 특성 변화를 알아보았다. 한국표준과학연구원에서 자체 제작한 chamber를 이용하여 RF sputter로 Si wafer 위에 IGZO 박막을 증착하고 수소 ion beam treatment를 한 뒤, SEM과 XPS를 사용하여 박막 표면의 물성 변화를 분석하였다. 실험에 사용된 chamber에는 sputter gun과 ion beam이 함께 장착되어 있으며, scroll pump와 TMP를 사용하여 pressure를 유지하였다. 실험 시 base pressure는 $1.4{\times}10^{-6}Torr$였다. RF power 150 W. ion beam power 2,000 V에서 실험을 진행하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.116-119
• /
• 2005

Al doped ZnO thin films (ZnO:Al) were deposited on poly carbonate (PC) substrate by rf magnetron sputtering. In addition, the electrical, optical properties of the films prepared at various conditions were investigated. As the sputter power increased, the resistivity of ZnO:Al films decreased, regardless of substrate types. However, the resistivity of the films increased with the sputter pressure. The ZnO:Al films were increasingly dark gray colored as the sputter power increased, resulting in the loss of transmittance. High quality films with resistivity as low as 1.43${\times}$10$^{-4}$ Ω-cm and transmittance over 80 % have been obtained by suitably controlling the deposition parameters.