• Clinics in Shoulder and Elbow
• /
• v.22 no.3
• /
• pp.139-145
• /
• 2019

Background: The present study was undertaken to evaluate the relationship between location of the rotator cuff tear and shape of the subacromial spur. Methods: Totally, 80 consecutive patients who underwent arthroscopic repair for partial thickness rotator cuff tear were enrolled for the study. Bigliani's type of the acromion, type of subacromial spur, and location of partial thickness tear of the rotator cuff were evaluated using plain X-ray and magnetic resonance imaging. We then compared the groups of no spur with spur, and heel with traction spur. Results: Of the 80 cases, 25 cases comprised the no spur group, and 55 cases comprised the spur group. There was a significant difference in type of tear (p=0.0004) between these two groups. Bursal side tears were significantly greater (odds ratio=6.000, p=0.0007) in the spur group. Subjects belonging to the spur group were further divided into heel (38 cases) and traction spur (17 cases). Comparing these two groups revealed significant differences only in the type of tear (p=0.0001). Furthermore, the heel spur had significantly greater bursal side tear (odds ratio=29.521, p=0.0005) as compared to traction spur. Conclusions: The heel spur is more associated to bursal side tear than the traction spur, whereas the traction spur associates greater to the articular side tear.

• KCID journal
• /
• v.21 no.1
• /
• pp.118-126
• /
• 2014

In this study, the use of the spur of riverbank technique is being investigated. The spur of the riverbank typically reduces the velocity of flow and protects the embankments by increasing friction along the water and the banks. This also has an effect in the rise of water level upstream. It is also used for the rectification of riverside line and restoration of the waterway through sedimentation near the spur of the riverbank. In this study, physical-scaled experiments are conducted to investigate the process of creating a mild meandering channel using the spur of the riverbank with varying water flows and sedimentation functions. The hydraulics observations are taken with respect to the varying heights and length of the riverbank's spurs and the distance between each spur for the formation of the mild meandering channel. It is observed that for 1.06 times of the meander length, it requires 2 times of the interval with each spur of river width. Similarly, 1.25L times of the meander length, it requires 0.5 times of the interval with each spur of river width. The sand accumulation is induced by the spur of riverbank when the spur of riverbank's heights are more than 40% of water depth and the length of the spur of riverbank needs under than 20% of river width for avoid exaggerated sand accumulation in the center of channel.

• Transactions of Materials Processing
• /
• v.6 no.6
• /
• pp.500-507
• /
• 1997

The conventional closed-die forgings had been applied to the forging of spur gears. But the forgings require high forging-pressure. In this paper, new precision forging technology have been developed. The developed technology is two steps forging process. Good shaped products are forged successfully with lower forging-pressure than those of conventional forging. The accuracy of the forged spur gear obtained by new precision forging technology is set nearly equal to that of cut spur gear of fourth and fifth class in Korean industrial standard.

• Journal of the Korean Society of Safety
• /
• v.11 no.3
• /
• pp.53-58
• /
• 1996

This paper deals with the bending fatigue strength of sintering spur gears. The test specimens are used to sintering spur gear to be consisted of Fe-C-Ni-Mn and SCM415 spur gear. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and the enhancement of fatigue strength due to carburized treatment is clarified, Accordingly, this study presents the fatigue strength of sintering spur gear, SCM415 spur gear and carburized gears of them. The strength enhancement due to the carburized treatment is discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.41-53
• /
• 1995

Forging of spur gears has been investigated by means of upper-bound method. The term forging means forging of spur gears with solid cylindrical billets, hollow billets with flat punch. Kinematically admissbile velocity field for forging of spur gears has been proposed in this study. The 1/2 pitch of spur gear has been divided into seven dieformation regions, wherein, an involute curve has been introduced to represent the shape of die profile. Especially neutral surface has been introduced intor forging of hollow gears from hollow billets. By using the kinematically admissible velocity field, the powder requirements and suitable conditions for forging fo spur gears were successfully calculated with numerical method. According to the analysis , the acceptable number of teeth for forging of spur gears is from 15 to 20.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.265-274
• /
• 1995

Characteristics of vegetative spur leaf, spur bud, fruiting supr leaf and flowering in relation to canopy position was investigated on order to promote better spur bud and flower bud differentiation on Citrus junos. There was no difference in vegetative spur leaf characteristics among directions. Vegetative spur leaf number and leaf area showed no difference between top and bottom position. There was no difference in spur bud size among directions, but spur bud at top was larger than that at bottom. Specific leaf weight of vegetative spur was mostly influenced by light interception, and leaf dry weight per spur average leaf dry weight, spur bud length and diameter had also a very high correlation with light interception rate. Shading and GA treatment in spur bud and flower bud differentiation was ineffective than natural light. Fruit thinning enhanced fruit quality as well as flower bud differentiation through an increase of leaf number per fruit, over 40 in Citrus junos.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.531-537
• /
• 2018

A novel PLL with a delta-sigma modulator and a spur reduction circuit is proposed. delta-sigma modulator makes the LF remove noise easily by moving the spur noise to a higher frequency band. Therefore, the magnitude of spur can be reduced the reasonable bandwidth. The spur reduction circuit reduces the spur size by reducing the LF voltage change generated during the period of reference signal. The spur reduction circuit is designed as simple as possible not to increase the size of PLL. The proposed PLL with the previous two techniques is designed with a supply voltage of 1.8V in a 0.18um CMOS process. Simulation results show an almost 20dB reduction in the magnitude of spur. The spur reduced PLL can be used in narrow bandwidth communication system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.651-657
• /
• 2018

A novel PLL with a delta-sigma modulator and a spur reduction circuit is proposed. delta-sigma modulator makes the LF remove noise easily by moving the spur noise to a higher frequency band. Therefore, the magnitude of spur can be reduced the reasonable bandwidth. The spur reduction circuit reduces the spur size by reducing the LF voltage change generated during the period of reference signal. The spur reduction circuit is designed as simple as possible not to increase the size of PLL. The proposed PLL with the previous two techniques is designed with a supply voltage of 1.8V in a 0.18um CMOS process. Simulation results show an almost 20dB reduction in the magnitude of spur. The spur reduced PLL can be used in narrow bandwidth communication system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.135-138
• /
• 2004

Since the upsetting type is superior to an extrusion type to get the dimensional accuracy of cold forged spur gear, the upsetting type process far spur gear cold forging has been studied. FE analysis of upsetting type process fur spur gear cold forging was performed to investigate about flow pattern of workpiece and die stress. To analyze the elastic characteristics of die, both rigid and elastic material model were used during loading stage. Under-filled defects were detected In lower portions of spur gear forged by upsetting type in experimental. When the elastic material model for die was used, the under-filled defects could be predicted. On the other hand, if the material model of die was rigid, the defects could not been presented because the die deflection was not considered.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.490-498
• /
• 2000

The authors have proposed methods (lead crowning and profile modification) for modifying the geometry of spur gears and investigated the contact pattern as well as the transmission errors to recommend the appropriate amount of modification. Based on the investigation, dynamic load of the modified spur gear drive has been calculated, which is helpful to predict the life of the designed gear drive. Computer programs for simulation of meshing, contact and dynamics of the modified spur gears have been developed. The developed theory is illustrated with numerical examples.