• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.311-323
• /
• 2019

The number of newly constructed traditional Korean houses, i.e., Hanoks, and light-frame buildings is increasing. However, related research is limited owing to the lack of awareness regarding safety evaluations. Therefore, this study conducted an outdoor exposure test to accurately evaluate wooden constructions. Spruce, pine, and fir (SPF) material was monitored for a year, wherein the SPF material was artificially dried under 18% moisture content, and its physical properties and color differences were measured once a month. Large differences were observed in the material's weight and moisture content, which are indexes sensitive to daily range and rainfall; however, no significant difference was found for other basic properties in the pre and post test results. Herein, $L^*$, $a^*$, and $b^*$ values represent color differences; these values exhibited a general decrease after the test. Such differences were attributed to the loss of lignin in the wood. The color difference value was high between the months of May and July, when the daily range and rainfall significantly fluctuated. Multiple regression analysis was performed on the $a^*$ value (redness indicator), daily range, rainfall, and ultraviolet index. The results indicated that the daily range influenced redness the most. According to the estimated regression equation, the daily range and redness are positively correlated. Based on the results, the types and influence of independent variables on color difference are expected to change as the wood's duration of outdoor exposure and the amount of data obtained both increase.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.36-44
• /
• 2008

목조건축물로부터 해체된 고목재를 해당 건축물의 복원이나 새로운 건축물에 재사용하기 위해서는 열화 및 부후 부위를 제외한 건전재의 재질 및 강도성능에 대한 평가가 필요하다. 트러스 현재로 사용된 부재와 사찰에 사용된 부재에 대해 현미경으로 수종식별을 행하고 KS 기준에 따라 각종 물성 및 강도 시험을 행하여 문헌에 의한 결과와 비교 검토하였다. 잎갈나무(Korean larch)는 재질 및 강도 성능이 기존 문헌값보다 높게 나타났으며, 소나무(Korean red pine)와 가문비나무(Yezo spruce)의 경우 해체재의 강도성능이 대체적으로 낮게 나타났다. 육안에 의한 건전부위의 시험편 내의 조직적 열화는 현미경적으로도 관찰되지 않았다. 인장시험편의 중앙부 두께가 5 mm에서 3 mm로 변함에 따라 인장강도가 증가하여 시험편 치수에 대한 검토가 필요한 것으로 판단되었으며, 압축 및 휨 시험법은 현행 기준으로도 적합한 수준이었다. 고목재류에 대한 구체적인 기초 강도 성능평가를 위한 시험방법 및 철물접합부의 접합성능에 대한 차후 연구 검토가 필요한 것으로 평가되었다.

• Interaction and multiscale mechanics
• /
• 제5권3호
• /
• pp.229-265
• /
• 2012

Hygroexpansion of wood is a known and undesired characteristic in civil engineering. When wood is exposed to changing environmental humidity, it adsorbs or desorbs moisture and warps. The resulting distortions or - at restrained conditions - cracks are a major concern in timber engineering. We herein present a multiscale model for prediction of the macroscopic hygroexpansion behavior of individual pieces of softwood from their microstructure, demonstrated for spruce. By applying poromicromechanics, we establish a link between the swelling pressure, driving the hygroexpansion of wood at the nanoscale, and the resulting macroscopic dimensional changes. The model comprises six homogenization steps, which are performed by means of continuum micromechanics, the unit cell method and laminate theory, all formulated in a poromechanical framework. Model predictions for elastic properties of wood as functions of the moisture content closely approach corresponding experimental data. As for the hygroexpansion behavior, the swelling pressure has to be back-calculated from macroscopic hygroexpansion data. The good reproduction of the anisotropy of wood hygroexpansion, based on only a single scalar calibration parameter, underlines the suitability of the model. The multiscale model constitutes a valuable tool for studying the effect of microstructural features on the macroscopic behavior and for assessing the hygroexpansion behavior at smaller length scales, which are inaccessible to experiments. The model predictions deliver input parameters for the analysis of timber at the structural scale, therewith enabling to optimize the use of timber and to prevent moisture-induced damage or failure.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.86-94
• /
• 1999

Alkaline peroxide bleaching of chemi-mechanical pulp is a very complicated system where various process factors affect the bleacing performance and pulp properties. Traditional onefactor-at a time method is ineffective and costly infinding the optimal bleaching conditions. In this study, statistical experimental design and multiple regression method wre used to investigated the interactions among various bleaching factors and to find out the possbile maximal brightness development during one stage alkaline peroxide bleacing of TMP. The TMP was made from 10% Korean red pine and 90% Korean spruce and had an initial brightness of 54.5% ISO. the TMP was pretreated with EDTA(0.5% on O.D. pulp, 3% pulp consistency, 30$^{\circ}C$ for 60 minutes) and bleached in a 2 L Mark V Quantum Reactor at 750 rmp, 7.5% of bleaching consistency and with 0.05% magnesium sulfate addition. The ranges of chemical factors studied , based on oven-ried pulp, were 1-5% for hydrogen peroxide, 1-4% for sodium hydroxide and 1-4% for sodium silicate. The rages of reaction temperature and time were 50-90$^{\circ}C$ and 40-180minutes respectively. Interactions of hydrogen peroxide with alkali , time with temperature ature, alkali with time and silicate with temperature were found to be significant which means that hydrogen peroxide bleaching will be favored at stable concentration of perhydroxyl ion, relatively short time and low temperature, and high level of silicate. Mathematical model which has good predictability for target brightness in one stage peroxide bleaching can also be established easily. Base ion the model, maximal brightness of 70% ISO was found to at 50$^{\circ}C$ and 50 minutes by chemical additions of 5% for hydrogen peroxide, 3.2-3.4% for sodium hydroxide and 4% for silicate based on O.D. pulp. However, this result might not be suitable for situation where furnishes are different from ours, or different pretreatment is used, or bleaching carried out at different pulp consistency. In these cases it will be good to re-investigate the process by a similar methodology as was used in this study.

• 미생물학회지
• /
• 제20권1호
• /
• pp.41-51
• /
• 1982

한국의 논에서 나타나는 토양균류상을 서울근방 두곳 즉 역곡동과 신월동에서 4계절을 통해 채취한 토양표본을 희석평판배지법에 의해 분리했다. 총 85개 순수배양균을 분리했고, 그중 13속, 30종을 동정했다. 동정된 30종중 6종은 불완전 균류로 한국에서 처음으로 이 논문에 기재하였다. 불완전균류중 논토양에 많이 분포되어 있는 것은 대부분이 Penicillium 속이다 그 중 한국에서 처음으로 나타난 종류로는 Penicillium funiculosum, P. piceum, P. roqueforti 그리고 P. verruculosum 등이었다. P. piceum의 경우는 가문비나무같은 상록수와 유사한 전형적인 원추형 분생자루가 현저한 특징을 나타낸다. P. roqueforti는 penicilli가 부정형으로, 빽백하게 분기된 metulae와 밀착 또는 분산상의 phialide를 가지며 stipes는 두텁고 많은 입자를 가진 벽을 형성하고 있다. 그외 Cladosporium cladosporioides, Paecilomyces variotii도 분리되었으며, Zygomycete 중에서는 Zygorhynchus moelleri가 가장 우세하게 분포되어 있는 종으로써 난형 Columella를 가지고 있는 아구형포자낭과 직경 $35\mu\textrm{m}$의 암색인 접합포자를 형성한다.

• Journal of Microbiology and Biotechnology
• /
• 제25권6호
• /
• pp.893-902
• /
• 2015

Various Lactobacillus reuteri strains were screened for the ability to convert glycerol to 1,3-propanediol (1,3-PDO) in a glycerol-glucose co-fermentation. Only L. reuteri DSM 20016, a well-known probiotic, was able to efficiently carry out this bioconversion. Several process strategies were employed to improve this process. Co²⁺ addition to the fermentation medium, led to a high product titer (46 g/l) of 1,3-PDO and to improved biomass synthesis. L. reuteri DSM 20016 produced also ca. 3 µg/g of cell dry weight of vitamin B₁₂, conferring an economic value to the biomass produced in the process. Incidentally, we found that L. reuteri displays the highest resistance to Co²⁺ ions ever reported for a microorganism. Two waste materials (crude glycerol from biodiesel industry and spruce hydrolysate from paper industry) alone or in combination were used as feedstocks for the production of 1,3-PDO by L. reuteri DSM 20016. Crude glycerol was efficiently converted into 1,3-PDO although with a lower titer than pure glycerol (33.3 vs. 40.7 g/l). Compared with the fermentation carried out with pure substrates, the 1,3-PDO produced was significantly lower (40.7 vs. 24.2 g/l) using cellulosic hydrolysate and crude glycerol, but strong increases of the maximal biomass produced (2.9 vs 4.3 g/l CDW) and of the glucose consumption rate were found. The results of this study lay the foundation for further investigations to exploit the biotechnological potential of L. reuteri DSM 20016 to produce 1,3-PDO and vitamin B₁₂ using industry byproducts.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.57-65
• /
• 2005

Following our previous reports for finger-jointed woods with various finger profiles studied for the efficient use of small diameter logs and woods containing various defects, twelve types of finger-jointed woods glued with three kinds of adhesives and with two sizes of finger pitches were made with sitka spruce and red pine. The effects of the adhesives and finger pitches on bending creep performances of finger-jointed woods were investigated. The shape of creep curves differed among the used adhesives and finger pitches of finger-jointed woods for both tested species. Their creep curves showed a linear behavior beyond about one hour, and the N values fitted to power law increased with increasing finger pitches. The initial deformation increased with increasing finger pitches, regardless of the tested species and kinds of adhesives, whereas the effect of finger pitches on the creep deformation was not clear. For finger-jointed woods glued with polyvinyl acetate (PVAc) resin, creep failure occurred in 106 hours after the load was applied. And the difference of the creep compliance between finger-jointed woods glued with resorcinol-phenol formaldehyde (RPF) resin and aqueous vinyl urethane (AVU) resin was small. The ratios for creep performances of finger-jointed woods glued with RPF resin and AVU resin versus solid wood were higher in creep deformation than initial deformation for both species, and the difference between both adhesives was not found. The relative creep decreased with increasing finger pitches, and the marked differences was not found between RPF resin and AVU resin.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.58-65
• /
• 1995

The possibilities of the estimation of the moisture content(MC) for sitka-spruce (Picea sitchensis Carr.) by measuring density have been investigated. The method is based on the relationships between the wood density and moisture content of wood expressed by Equations (8)~(9). The purpose of this study is examining the estimation of the moisture content of wood by density and the variation of moisture content with annual ring width of wood. The following conclusions were obtained; 1. This method is very convenience because of the average moisture content of wood can be obtained by a simple estimation. This estimation can be made from the easy measurement of the weight and volume of wood. 2. Coefficient of determination between the experimental MCs and theoretical MCs which is calculated by the oven-dry densities of each specimens and Equations (8), (9) is 0.98. This Correlation is very remarkable. Therefore the model Equations on the estimation of moisture content by wood density was available. 3. Relationship between experimental MCs and theoretical MCs which is estimated by average oven-dry density of total specimens showed positive correlation(Fig.2). But from the Fig.4. we can concluded that the number of specimens is two groups. This phenomenon is considered that the variation of MC by the annual ring width from the specimens' observations. Consequently, the MCs of wood by density, is likely to be successful method. can be estimate using by the average oven-dry densities divided with the annual ring widths of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.444-450
• /
• 2011

The goal of this study is to investigate bending properties of domestic timber. Three representative structural timber from Larix kaempferi, Pinus koraiensis, and Pinus densiflora, in the northeastern South Korea were selected. Visual grading for the timber was conducted based on KFRI notification 2009-01 and the bending strength for the timber was evaluated based on ASTM D 198 bending. The high percentage of grade 1 and 2 for Larix kaempferi shows that the KFRI notification was optimized for this species. The bending strength distributions from Pinus koraiensis and Pinus densiflora were very similar. It could be possible to specify the allowable bending properties of these two Specification using a united species group similar to spruce-pine-fir. Lastly, the bending strength of $120{\times}180mm$ structural members was higher than both existing values in KBC 2009 and design values for timber of imported species described in the NDS. Thus, 120 mm thick domestic softwoods could replace the commercial imported species and the KBC should be modified to provide design values for both timber and dimensional lumber, respectively, like NDS.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.22-33
• /
• 2012

This study was carried out to investigate the characteristics of the lining papers which had been separated from six pieces of paintings and calligraphic works of the 18th and the 20th century. A total 20 kinds of lining papers were examined on the physical properties, colors, fiber morphology, and color reactions. The grammage and thickness of lining papers which had been used hanging-scroll type works were higher than those of folder types. On the other hand, the grammage and thickness of the first layer lining papers which had been separated from silk ground works were lower than those of paper ground works. All kinds of lining papers were colored from yellow to yellowish red because of unbleaching and deterioration. Through the examination on fiber morphology and color reactions, lining papers were verified that all of those were made from paper mulberry bast fiber but the first layer of the Mukjukdo. The lining paper which of the first layer of the Mukjukdo was verified that it was made from mixture of paper mulberry, hemp, and spruce pulps.