• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2610-2615
• /
• 2010

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Spring 2.5 and Seam 2.0 framework. Lightweight container architecture, such as the EJB, but not heavy, to provide all of the architecture is possible. Currently in production until the lightweight container architecture, known most commonly used architecture framework is Spring and Seam. However, there is no comparison research about the performance of Spring 2.5 and Seam 2.0 framework with same identical platform. In this study, the Java Pet Store blueprint application development platform environment based on the same ordering system JPetStore Spring 2.5 and Seam 2.0 is in the design and implementation. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• Journal of Food Hygiene and Safety
• /
• v.17 no.2
• /
• pp.55-60
• /
• 2002

In order to investigate the microbiological contamination of spring water, we performed the standard plate count, coliform and psychrotrophilic bacteria in 109 spring waters in Seoul. Of 109 spring waters, geometirc mean standard plate count was 0.19 CFU/ml, and the highest in Mt. Boolam, 4..43 CFU/ml and Mt. Dobong, 3.86 CFU/ml, but not detected in Mt. Woomyun and Mt. Cheonggye. Four spring waters have shown over 100 CFU/ml in standard plate count. The geometric mean psychrotrophilic bacteria was 49.2 CFU/ml, the most prevalent spring water was Mt. Nam, 125 CFU/ml, the lowest Mt. Woomyeun. Among a total of 109, coliform was detected from 21 spring waters(19.3%) and the geometric mean of coliform was 0.005 MPN/100ml. The isolated genera of coliform were 7 isolates of E. coli(33%), 5 Klebsiella(24%), 4 Enterobacter(19%), 3 Citrobacter(14%) and 2 Serratia(10%), respectively. The 22 spring waters(20.2%) failed to meet the standard limits of drinking water based on regulation in Korea. The inappropriate rate of standard plate count in spring water was 4.5%, that of coliform was 81.1% and both of them was 13.6%. There was the significant correlation between standard plate count and psychrotrophilic bacteria in spring water(r=0.95, p<0.01).

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.331-337
• /
• 2011

Purpose: The purpose of this study was to impact of force system change in finger spring that add helical coil one round on orthodontic force. Methods: The following conclusions were drawn from the experiment conducted after bending 90 samples with a CNC wire forming machine while changing the height and lumen size to 1mm - 3mm - 5mm and 2mm - 3mm - 4mm respectively in the coil of the force system in finger spring added with one wheel of helical coil of 18-8 stainless steel round wire (${\Phi}0.5mm$, spring hard) from Jinsung Co. in domestic market under the following conditions: Laboratory name = Instron 5942; Temperature($deg^{\circ}C$) = 18.00; Humidity(%) = 50.00; Rate 1 = 10.00000 mm/min; Compressive extension = 5.0mm. Results: When Coil height is 1, 3, 5mm and lumen size is 2, 3, 4mm reduce finger spring as mean value of compressive extension occasion maximum load(mN) increases as coil height rises, and lumen size grows to 5.0mm. And was expose that compressive load(mN) increases as coil position of finger spring rises and increase as lumen size is decrescent. Conclusion: As the adherence height of coil was raised from 1mm through 3mm to 5mm, compressive load increased. As the lumen size increased from 2mm through 3mm to 4mm, compressive load decreased. Therefore, these results suggest that it is desirable to lower the coil height and enlarge the lumen size to enhance the biomechanical efficiency of finger spring when manufacturing the finger spring for removable orthodontic devices.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.137-142
• /
• 2012

This paper proposes a software development guidance and an evaluation index for the productivity related to Spring 2.5 and EJB 3.0 with same lightweight container architecture. Spring is a known successful open source standard model for lightweight container architecture. EJB in an enterprise environment as a standard framework is most commonly used in production. However, there is no comparison research about the performance of Spring 2.5 and EJB 3.0 Framework with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. In this study, the development platform environment based on the same pilot system Spring 2.5 and EJB 3.0 framework is in the design and implementation. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.10
• /
• pp.825-832
• /
• 2002

The present study investigated the enhancement of the absorption performance by the spring wrapped around the outer surface of the vertical falling film absorber tube. Heat and mass transfer enhancements were experimentally investigated, and flow visualization was performed to observe the wettability and flow pattern of the solution. The key experimental parameters were spring diameter (0.5, 1.0 mm) and spring pitch (1, 3, 10 mm), film Reynolds number (50~150), and concentration of LiBr-$H_2O$ solution (55, 60, 65 wt%). As the spring diameter was increased, the absorption mass flux, Sherwood number, Nusselt number, heat flux, and heat transfer coefficient were increased The Nusselt and Sherwood numbers showed the maximum at the spring pitch of 3mm, and the ratio of pitch to diameter of approximately 3 and 6 for the spring diamter of 0.5 mm, respectively.

• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.5-11
• /
• 1994

On purpose of relative comparison of between air-vent attached pattern and non attached one, casting tests were accomplished by castability analysis unrig wax screen mesh pattern. Experimental specimens are divided Into 4groups. 1) Air-vent attached pattern with high casting pressure(coil spring type centrifugal casting machine 2.5turn). 2) Air-vent attached pattern with low casting pressure(coil spring type centrifugal casting machine 1.5turn). 3) Air vent non attached pattern with high casting pressure(coil spring type centrifugal casting machine 2.5turn). 4) Air-vent non attached pattern with low casting pressure(coil spring type centrifrgal casting machine 1.5turn). The main results are as follows : 1) The condition of high casting pressure no.1, no.3 were showed perfect castability. 2) The condition of low-casting pressure, there is a wide difference between no.2, no.4 group. Castability of no.2 group preferable to no.4 group(p<0.001). 3) Low casting pressure and complex shape cause the low-castability. So it is recommanded that use of air-vent in case of complex shaped wax pattern with low easting pressure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1265-1274
• /
• 2009

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Spring Framework 2.0 and 2.5. Spring Framework is a known successful open source standard model for lightweight container architecture. However, there is no comparison research about the performance of Spring Framework 2.0 and 2.5 with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. This work proposes an specific index for evaluating the productivity of new version Spring Framework on a platform. Base on the result, the specific guidance of the developing software is obtained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.87-97
• /
• 2013

Recently the use of gas spring in the combat and commercial vehicle's suspension is increasing. Because of its nonlinear characteristics, the gas spring can support wide range of dynamic loads and gives good ride quality. In design of gas spring, isothermal and adiabatic processes are applied generally, but those processes could not produce heat transfer effect in the simulation. So in this study, heat transfer differential equation and BWR/Ideal state equation are used to calculate the pressure of gas spring which is changing with time. The numerical analysis showed that the pressure of gas spring forms a hysteresis loop in the both of the state equations. But the peak pressure value of BWR equation over 0.1Hz frequency are higher than that of adiabatic process. And the test results showed that the differences between test results and ideal gas equation are smaller than those of BWR equation, so the ideal equation is more accurate than BWR equation in this case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.589-595
• /
• 2009

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Spring Framework 2.5. Spring Framework is a known successful open source standard model for lightweight container architecture. Non EJB and the EBJ architecture to resolve the problem with benefits to support the new architecture is a lightweight container architecture. This architecture, such as the EJB, but not heavy, to provide all of the architecture is possible. The lightweight container architecture is most often used in business spring framework is well-known architecture. Therefore, this research has the Non EJB and the EJB to solve the advantages and disadvantages developed to support the latest spring framework 2.5 lightweight container architecture based on the design and implementation of a hotel reservation system with the objective through the specification of the software previously to provide guidance to development productivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2396-2401
• /
• 2011

This paper aims to design and realize android smartphone mobile office ticket reservation system based Spring Framework 2.5 and iBatis 2.3 ORM solution. Currently being used as lightweight container architecture Spring Framework is well-known structure. Also intended to increase the productivity of database techniques are ORM. With the current ORM mapper is widely used in production are iBatis as a tool. Lightweight container architecture in this study, best known as the Spring Framework 2.5 and iBatis 2.3 ORM solution environment based on the android smartphone mobile ticket reservation system implementation after analyzing the mobile webapp development productivity with the objective is to provide guidance.