• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.180-187
• /
• 2020

Security threats are increasing with interest due to the mass spread of smart devices, and vulnerabilities in developed applications are being exposed while mobile malicious codes are spreading. The government and companies provide various applications for the public, and for reliability and security of applications, security checks are required during application development. In this paper, among the security threats that can occur in the mobile service environment, we set up the vulnerability analysis items to respond to security threats when developing Android-based applications. Based on the set analysis items, vulnerability analysis was performed by examining three applications of public institutions and private companies currently operating as mobile applications. As a result of application security checks used by three public institutions and companies, authority management and open module stability management were well managed. However, it was confirmed that many security vulnerabilities were found in input value verification, outside transmit data management, and data management. It is believed that it will contribute to improving the safety of mobile applications through the case of vulnerability analysis for Android application security.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.84-87
• /
• 2009

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.166-170
• /
• 1991

An advanced on-resistance model of VDMOS devices in the low voltage regime is proposed and verified by 2-D device simulations. The model considers the lateral gaussian doping profiles in the channel region and exact current spreading angles in the epitaxial layer for both linear and cellular geometries by employing the conformal mapping. It is found out that the on-resistance of low voltage VDMOS may be overestimated considerably if it is analyzed by the conventional method. The 2-D device simulation results show that the proposed model is valid for all ranges of cell spacings and breakdown voltages.

• 디지털산업정보학회논문지
• /
• 제16권1호
• /
• pp.11-19
• /
• 2020

IoT has been consistently used in various fields such as smart home, wearables, and healthcare. Since IoT devices are small terminals, relatively simple wireless communication protocols such as IEEE 802.15.4 and ISO 18000 series are used. In this paper, we designed the 802.15.4q 2.4 GHz TASK physical layer. Physical protocol data unit of TASK supports bit-level interleaving and shortened BCH encoding. It is spread by unique ternary sequences. There are four spreading factors to choose the data rate according to the communication channel environment. The TASK physical layer was designed using verilog-HDL and verified through the loop-back test of the transceiver. The designed TASK physical layer was implemented in a fpga and tested using MAXIM RFICs. The PER was about 0% at 10 dB SNR. It is expected to be used in small, low power IoT applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.917-919
• /
• 2009

Effects of nano-silver contents(15~50wt%) on screen printed-etched gate electrodes and electrical characteristics of OTFTs were investigated. As Ag contents increased, the screen-printed film was transferred exactly without spreading and obtained the densely-packed layer with a stable and excellent conductivity but, its thickness was increased and surface became rougher. It was found that the leakage current of MIM devices and off-state currents of OTFTs became larger due to poor step coverage of PVP dielectric layer on the thick and rough gate electrodes for nano-Ag inks with Ag contents more than 30wt%.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.581-585
• /
• 2006

Macro interfaces between two different bulk materials which affect the stability of insulation system exist inevitably in the complex insulation system using in extra high voltage (EHV) electric devices. In this paper, Interface between epoxy and ethylene propylene diene terpolymer (EPDM) was selected as an interface in electrical insulation system and the AC dielectric strength of the interface was investigated. Air compress system was used to give pressure to the interface. Specimens were prepared in various ways to generate different surface conditions for each type of interface. Increasing interfacial pressure, decreasing surface roughness and spreading oil over surfaces improve the AC interfacial dielectric strength. Especially, the dielectric strength was saturated at certain interfacial pressure.

• Journal of Information Processing Systems
• /
• 제10권1호
• /
• pp.81-91
• /
• 2014

Widely spreading smart devices have become an important information sharing channel in everyday life. In particular, social networking services (SNS) are the hub for content creation and sharing. Users post their contents on SNS servers and receive contents of interest. Contents are delivered in either pull or push. Regarding delivery, cost and wait time are two important factors to be minimized, but they are in a trade-off relationship. The Push-N-scheme (PNS) and timeout-based push scheme (TPS) have been proposed for content delivery. PNS has an advantage in cost over TPS, whereas TPS has an edge in terms of the wait time over PNS. We propose a hybrid push scheme of PNS and TPS, called push-N-scheme with timeout (PNT), to balance the cost and the wait time. We evaluate PNT through simulations, with the results showing that PNT is effective in balancing PNS and TPS.

• 로봇학회논문지
• /
• 제17권4호
• /
• pp.387-396
• /
• 2022

Logistics industry still heavily relies on human labor in many field processes. However, robot applications in logistics are rapidly increasing, encouraged by technological progresses in robotics and cheaper robot solutions from competition between robot suppliers. Effectiveness of logistics automation are higher productivity for cost reduction and increased process capabilities for better profit, which is witnessed in many fields of logistics industry. In this paper, differences in logistics services - contract logistics, parcel, and fulfillment - are addressed, and characteristics and issues in application of various kinds of logistics robots such as AGV, AMR, ASRS, box/piece handling robots and robotic wearable devices are discussed. The advantages from flexibility and scalability of logistics automation by robots will benefit the future logistics business.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1845-1852
• /
• 2015

바코드 시스템과 전자태그(RFID)부터 저 전력 블루투스 기술을 활용한 비콘(Beacon)까지 진료 및 검사 단계를 자동화하고 스마트 기기와 연계된 진료 정보를 이용하는 등 정보기술과 보건‧의료 분야의 용합이 널리 확산되고 있다. 본 논문에서는 환자에게 혈액을 수혈하는 과정에서 다른 혈액형이 수혈되는 사고를 예방하기 위해 안전한 수혈관리를 위한 모바일 헬스케어 시스템을 설계하고 구현하였다. 환자 팔찌, 채혈 용기, 혈액백 및 의료진 신분증의 바코드에 저장된 정보를 스마트 기기로 인식하여 환자의 정보와 매칭시켜 안전하고 효율적인 수혈이 가능하도록 구현하였다. 본 논문에서 제안하여 구현한 수혈관리 모바일 헬스케어 시스템을 종합병원의 수혈 과정에 적용한 결과, 안전하고 효율적인 수혈이 가능하여 수혈 과정에서 발생하는 사고의 예방이 가능한 것으로 확인되었다.

• 한국정보통신학회논문지
• /
• 제23권2호
• /
• pp.207-214
• /
• 2019

기술 발전 속도가 증가되고, 고성능의 디지털 기기가 확산되고 있다. 기존 유선 환경에 최적화 되어 제한적으로 활용되던 PC와 같은 유선 디지털 기기에서 시 공간의 제약에서 벗어나, 언제 어디서나 효율적인 업무 수행이 가능한 스마트워크로 전환되고 있다. 유선환경에 비해 물리적 위협(단말기 분실, 도난 및 파손 등), 기술적 위협(도난, 서비스 거부, 비인가 접근 등) 등 다양한 보안 위협에 대해 무결성과 가용성을 확보할 수 있는 시스템 보안설계가 필요하다. 본 논문 연구에서는 스마트워크의 네트워크시스템, 유 무선 링크시스템, 디지털 스마트기기를 분석한다. 현재 업무에 사용되고 있는 스마트워크 유선시스템과 향후 무선시스템을 위한 보안설계 방안을 연구한다. 본 연구는 안전한 스마트워크 구축에 기초자료로 활용될 것이다.