• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4551-4559
• /
• 2022

The aim of this research is to analyze the characteristics of a core melt discharged from the reactor vessel and the spreading behavior the core melt in the reactor cavity of the SMART. First, a severe accident sequence under conservative conditions is simulated by the MELCOR code to obtain the conditions for an analysis of the spreading behavior and coolability of the ex-vessel melt. Second, the spreading behavior and coolability of the ex-vessel melt are analyzed by the MELTSPREAD code. The level, temperature, and pressure of the water in the cavity as well as the temperature, mass, composition, and discharge velocity of the melt were utilized to construct the ex-vessel analysis. The melt spread only to part of the cavity, and that the height of the corium in a static state was less than 25 cm. The characteristics of a small modular reactor on the spreading behavior and coolability of melt were analyzed. In the SMART, the amount of melt discharged into the cavity is relatively small and the area of the cavity is sufficiently large when compared to a high-power pressurized water reactor. It was found that the coolability of an ex-vessel core melt can be sufficiently secured.

• Asia pacific journal of information systems
• /
• 제30권1호
• /
• pp.1-20
• /
• 2020

Malicious rumors often emerge online. However, few studies have examined why people spread online rumors. Recognizing that spreading online rumors is not only rational, but also emotional, this paper provides insights into the behavior of online rumor spreading using the cognitive emotion theory. The results show that perceived credibility of online rumors enhances both positive and negative emotions. However, positive emotions affect neither attitude nor behavior, whereas negative emotions affect both aspects of the spreading of online rumors. The results also indicate that prior positive attitude toward object influences negative emotions. Issues involvement moderates the relationship between attitude and behavior.

• Asia pacific journal of information systems
• /
• 제29권4호
• /
• pp.591-614
• /
• 2019

With the proliferation of social media, it has become easier for people to spread rumors online, which can aggravate the issues arising from online rumors. There are many individuals and organizations that are adversely affected by malicious online rumors. Despite their importance, there has been little research into why and how people spread rumors online, thus inhibiting the understanding of factors that affect the spreading of online rumors. With attention seeking to address this gap, this paper draws upon the dual process theory and the de-individuation theory to develop a theoretical model of factors affecting the spreading of an online rumor, and then empirically tests it using survey data from 211 individuals about a specific rumor. The results indicate that the perceived credibility of the rumor affects the individuals' attitudes toward spreading it, which consequently affects the rumor spreading behavior. Vividness, confirmation of prior beliefs, argument strength, and source credibility positively influence the perceived credibility of online rumors. Finally, anonymity moderates the relationship between attitude toward spreading online rumors and the spreading behavior.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2967-2970
• /
• 2007

In a usual painting process, a liquid drop spreads on canvas by being dragged along a paintbrush. To obtain the fundamental understanding of the painting process from the mechanical point of view, we experimentally investigate various dynamic behavior of a liquid drop that spreads between moving solid plates. It is shown that three distinct types of drop spreading take place, i.e. shearing, spreading, and intact dragging, depending on the liquid viscosity and surface tension, the plate speed, and the wettability. We suggest a regime map based on the capillary number and the receding contact angle, which indicates the boundaries between different types of spreading behavior in a dimensionless space.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.1-7
• /
• 2005

The objective of this work was to investigate the effect of spreading behavior of the sizing agents (AKD or dialkyl ketone) on the sizing development of AKD-sized paper. There was a direct relationship between the spreading behavior of the sizing agents and their melting points. Both AKD and dialkyl ketone showed no substantial spreading until the temperature reaches to their melting points. Consequently, dialkyl ketone did not provide sizing development when the paper was heat-treated below $75^{\circ}C$, while AKD provided sizing effect even the paper heated at $50^{\circ}C$. The ketone, however, provided rather higher sizing effect than that of AKD, when the paper was heat-treated over $100^{\circ}C$. This result means that the ketone also gives sizing development to paper, moreover the ketone could give higher sizing effect to paper than AKD when it was melted and well spreaded on the fiber surface. While the ketone introduced to papers from hydrolyzed AKD emulsion could not contribute to sizing development.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.105-112
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. However, a case of pile failure was reported despite the fact that a large margin of safety factor was employed in their design. This means that the current seismic design method of pile is not agreeable with the actual failure mechanism of pile. Newly proposed failure mechanism of pile is a pile failure based on buckling instability. In this study, failure behavior of pile embedded in liquefied soil deposits was analyzed considering lateral spreading and buckling instability performing 1g shaking table test. As a result, it can be concluded that the pile subjected to excessive axial loads ($near\;P_{cr}$) can fail by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, lateral spreading increased lateral deflection of pile and reduced the buckling load, promoting more rapid collapse. In addition, buckling shape of pile was observed. In the ease of pile buckling, hinge formed at the middle of the pile, not at the bottom. And in sloping grounds, location of hinge got loiter compared with level ground because of the effects of lateral spreading.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.14-19
• /
• 2007

We present a direct numerical simulation technique and some preliminary results of the capillary spreading of a droplet containing particles on the solid substrate. We used the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension and employed the discontinuous Galerkin method for the stabilization of the interface advection equation. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles. We investigated the droplet spreading by the capillary force and discussed effects of the presence of particles on the spreading behavior. It has been observed that a particulate drop spreads less than the pure liquid drop. The amount of spread of a particulate drop has been found smaller than that of the liquid with effectively the same viscosity as the particulate drop.

• 한국전산유체공학회지
• /
• 제13권3호
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.389-396
• /
• 2018

This paper presents a numerical investigation on the structural response of a multi-story building subjected to spreading multi-compartment fires. A recently proposed simple fire model has been used to simulate two spreading multi-compartment fire scenarios in a 10-story steel-framed office building. By assuming simple temperature rising and distribution profiles in the fire exposed structural components (steel beams, steel column and concrete slabs), finite element simulations using a three-dimensional structural model has been carried out to study the failure behavior of the whole structure in two multi-compartment fire conditions and also in a standard fire condition. The structure survived the standard fire but failed in the multi-compartment fire. Whilst more accurate fire models and heat transfer models are needed to better predict the behaviors of structures in realistic fires, the current study based on very simple models has demonstrated the importance and necessity of considering spreadingmulti-compartment fires in fire resistance design of multi-story buildings.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.308-312
• /
• 2022

3D 프린팅 기술은 다양한 재료를 적층하여 구조물을 제작할 수 있으며, 다양한 장점을 바탕으로 최근 제조분야에 널리 활용되고 있다. 특히 고해상도의 액적 기반 3D 프린팅 기술은 주로 광경화성 물질을 사용하여 액적을 증착해 나가며 최종 구조물을 형성한다. 물질의 광경화 특성으로 인해 프린팅 과정에서 발생할 수 있는 빛 노출에 따라 액적의 물성 및 증착 특성이 달라질 수 있다. 이에 본 연구에서는 광경화성 하이드로겔 액적의 빛에너지 조사 조건에 따른 액적의 점도변화 및 표면과의 퍼짐 거동에 관해 실험적으로 관찰 및 분석을 수행하였다.