• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2002년도 가을학술발표대회 디자인학 연구
• /
• pp.18-19
• /
• 2002

• 한국수학교육학회지시리즈A:수학교육
• /
• 제50권4호
• /
• pp.489-505
• /
• 2011

This study is an analysis on the focus of textbooks regarding the statistical chapters of "measures of representative(central tendency) and of the spread". Applying the summary-concept criteria of Juhyeon Nam(2007), 4 kinds of aspect of the chapter; (1) definition and its teleological validity of the measures of representative, (2) definition and practical value of the measures of spread (3) distributional form on the measures of representative and of spread (4) location and scale preservation or invariance of the measures of representative and of spread were observed. On the measures of representative, some definitions were insufficient to check the teleological validity of the measure. Most definitions of the measure of spread were based on the practical view points but no preparation for the future statistical inferences were found even by implication. Some books mention about the measures of representative and of spread for distributions, but we could not find any comments on the correspondence between the sample mean and the expectation of a distribution or population mean. However it is stimulant that some books check the validity of corresponding measures with the location and scale preservation or invariant property, that were not found in the previous curriculum.

• 한국주거학회논문집
• /
• 제27권4호
• /
• pp.59-66
• /
• 2016

The purpose of this study is to examine the necessity of 'emergency plumbing equipment for preventing the spread of water leakage'. It reviews social and economic costs when there is spread of water leakage and finds out that those are enormous. Expansion of water leakage causes conflicts between neighbors, economic loss and inconvenience from damages on facilities like elevator and power failure. Next, it examines the inability of existing plumbing equipment when it comes to spread of water leakage. Newly defined 'Surface Leakage' means rapid leak in the surface, and 'Internal Leakage' means seeping out slowly and gradually buried in the pipeline. It will also be analyzed by separating the concept of a leak in the two concepts of a 'Surface Leakage' and 'Internal Leakage'. It proposes emergency plumbing equipment for preventing the spread of water leakage as a solution for the expansion of water leakage. It explains general concepts of emergency plumbing equipment for preventing the spread of water leakage. It will also examine the effectiveness of the user by performing a survey of 420 multi-level building their opinion on the effects of an emergency plumbing equipments to prevent the spread of water leakage.

• 한국화재소방학회논문지
• /
• 제23권5호
• /
• pp.96-102
• /
• 2009

산불 발생 및 확산특성은 산불 관리에 있어서 기초로 요구되는 자료이다. 본 연구에서는 2007년부터 2009년 봄철까지 발생한 101개의 산불을 대상으로 발화지의 사면향, 확산방향, 바람방향을 분석하였다. 또한 발화 후 경과 시간을 이용하여 확산면적, 화선길이, 화두속도, 측면속도를 추정할 수 있는 회귀식을 도출하였다. 분석결과 57%의 산불이 남향계열의 방위에서 발생하여, 서풍계열(66%)의 영향을 받아, 68%의 산불이 동향으로 확산되었다. 산불 발생 후 시간당 약 11.8ha의 산림이 연소되면서 화선의 길이는 0.5km가 증가하였다. 화두 방향에서는 시간당 약 0.13km 속도로, 산불의 측면에서는 시간당 약 0.05km 속도로 확산되었다.

• 동아시아식생활학회지
• /
• 제7권2호
• /
• pp.159-165
• /
• 1997

The primary objective of this study was to learn the effect of various sugar particle size and level on cookie spread, The effect of sugar particle size and level on sugarsnap cookie spread was studied. Three different particle sized sugars; powered sugar, granulated sugar and sanding sugar, were used for the cookie test baking with five different sugar levels; 30, 45, 60, 75 and 90% based on the weight of flour. In mixing process, 5 minutes of creaming time was used for cream making and then the specific gravity of cream was measured on the basis of each different sugar particle size and level. In the result, the specific gravity of cream was influenced by sugar particle size and sugar level. However, the specific gravity of cream had no influence on cookie dough specific gravity. Cookie spread was influenced by sugar particle size and sugar level. Greater cookie spread was obtained by decreasing sugar particle size and increasing sugar level resulted in increased spread. Therefore, selection of suitable sugar particle size and its use level can be factors in controlling spread and imparting desired packaging characteristics.

• 한국통신학회논문지
• /
• 제38B권3호
• /
• pp.216-221
• /
• 2013

본 논문에서는 massive MIMO(Multiple-Input Multiple-Output) 시스템의 채널 특성 분석을 위해, 3차원 레이트레이싱 기반 무선 채널 시뮬레이터인 Wireless Insite를 이용하여, 마이크로셀 환경에서 수평으로 선형 배열된 4개와 128개의 이중 편파 안테나 (dual polarized antenna)로 구성된 송신 배열 안테나 시스템의 각도 확산(angular spread), 교차 편파 식별도(cross polarization discrimination, XPD), 그리고 지연 확산(delay spread) 특성을 비교 분석하였다. 시뮬레이션 및 분석을 통해 128개의 안테나 원소로 구성된 massive MIMO 시스템의 각도확산과 지연 확산은 4개의 안테나 원소로 구성된 MIMO 시스템 보다 작아지고 교차 편파 식별도는 커진다는 것을 확인하였다.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.299-310
• /
• 2021

External fire spread has the potential to breach vertical compartmentation and violate the fire safety strategy of a building. The traditional design solution to this has been the use of non-combustible materials and spandrel panels but recent audits show that combustible materials are widespread and included in highly complex systems. Furthermore, most jurisdictions no longer require detailing of spandrel panels under many different circumstances. These buildings require rapid investigation using rational scientific methods to be able to adequately classify the fire risk. In this work, we use an extensive experimental campaign of material-scale data to explore the critical parameters driving upward flame spread. Two criteria are outlined using two different approaches. The first evaluates the time to ignition and the time to burnout to assess the ability for a fire to spread, and can be easily determined using traditional means. The second evaluates the preheated flame length as the critical parameter driving flame spread. A wide range of cladding materials are ranked according to these criteria to show their potential propensity to flame spread. From this, designers can use conservative approaches to perform fire risk assessments for buildings with combustible materials or can be used to aid decision-making. Precise estimates of flame spread rates within complex façade systems are not achievable with the current level of knowledge and will require a substantial amount of work to make progress.

• 한국건축시공학회지
• /
• 제5권3호
• /
• pp.75-82
• /
• 2005

Sewage facilities are positively necessary for environment improvement such as rainwater removal, sewage disposal, preservation of the quality of water and health of the citizens in present-day. Meanwhile, a deterioration of the concrete sewer pipe is increasing rapidly due to the chemical and physical attack and especially biochemical attack that is to say biodeterioration. So, in advanced countries, prediction techniques and corrosion inhibition system for sewer concrete are developed and are being applied. Also, antibiotics were developed already but application of that is low because it is not economical and has no practical use. But, in domestic, countermeasures for the corrosion of sewage concrete are not sufficient and biochemical attack is not reflected in those essentially. In this study, to prevent biochemical corrosion of the sewer concrete, surface of the concrete was spread with liquefied inorganic antibiotics and then its engineering properties were experimentally investigated. As a result, compressive strength of the specimen spread with antibiotics were similar to those of non spread, Both bond strength and abrasion amount of the specimen spread with antibiotics were inferior to non spread. Properties of absorption and air permeability of the specimen spread with antibiotics were superior to non spread. Finally, carbonation depth, chloride ion penetration depth and weight change ration of the specimen spread with antibiotics were smaller than non spread.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.15-22
• /
• 2002

Flame spread experiments of a fuel droplet array were performed using a microgravity environment. N-decane, 1-octadecene, and the blends (50% : 50% vol.) of these fuels were used and the experiments were conducted at pressures up to 5.0 MPa, which are over the critical pressure of these fuels. Observations of the flame spread phenomenon were conducted for OH radical emission images recorded using a high-speed video camera. The flame spread rates were calculated based on the time history of the spreading forehead of the OH emission images. The flame spread rate of the n-decane droplet-array decreased with pressure and had its minimum at a pressure around half of the critical pressure and then increased again with pressure. It had its maximum at a pressure over the critical pressure and then decreased gradually. The pressure dependence of flame spread rate of 1-octadecene were similar to those of n-decan, but the magnitude of the spread rate was much smaller than that of n-decane. The variation of the flame spread for the blended fuel was similar to that of n-decane in the pressure range from atmospheric pressure to near the critical pressure of the blended fuel. When the pressure increased further, it approached to that of 1-octadecene. Numerically estimated gas-liquid equilibrium states proved that almost all the fuel gas which evaporated from the droplet at ordinary pressure consisted of n-decane whereas near and over the critical pressure, the composition of the fuel gas was almost the same as that of the liquid phase, so that the effects of 1-octadecene on the flame spread rate was significant.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.80-83
• /
• 2008

The characteristics of the spread of a forest fire are generally related to the attributes of combustibles, geographical features, and meteorological conditions, such as wind conditions. The most common methodology used to create a prediction model for the spread of forest fires, based on the numerical analysis of the development stages of a forest fire, is an analysis of heat energy transmission by the stage of heat transmission. When a forest fire breaks out, the analysis of the transmission velocity of heat energy is quantifiable by the spread velocity of flame movement through a physical and chemical analysis at every stage of the fire development from flame production and heat transmission to its termination. In this study, the formula used for the 1-dimensional surface forest fire behavior prediction model, derived from a numerical analysis of the surface flame spread rate of solid combustibles, is introduced. The formula for the 1-dimensional surface forest fire behavior prediction model is the estimated equation of the flame spread velocity, depending on the condition of wind velocity on the ground. Experimental and theoretical equations on flame duration, flame height, flame temperature, ignition temperature of surface fuels, etc., has been applied to the device of this formula. As a result of a comparison between the ROS(rate of spread) from this formula and ROSs from various equations of other models or experimental values, a trend suggesting an increasing curved line of the exponent function under 3m/s or less wind velocity condition was identified. As a result of a comparison between experimental values and numerically analyzed values for fallen pine tree leaves, the flame spread velocity reveals has a error of less than 20%.