• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.573-578
• /
• 2003

In this study, new type of induction charging system for electrostatic spraying was manufactured and proposed to improve the electrical safety and charging efficiency. And parameters of proposed system to generate the maximum deposition current with electrical safety were selected and investigated. The selected parameters were frequency of square pulse and thickness of insulation material, outer diameter of device and thickness and positions of electrode. Charging quantity of water drop was measured by deposition current detected from sensing plate indirectly. The maximum deposition current for each parameter were 3.5[uA] at the frequency of 15[kHz] and thickness of 0.25[mm] insulating layer. And maximum deposition currents were 2.8[uA] and 3.0[uA] at 25[mm] outer diameter of charging device and 0.25[mm] thickness of electrode each. Effects of electrode position from spraying nozzle on deposition current was a little.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.511-512
• /
• 2006

Tungsten coatings with different interlayers onto the oxygen-free copper substrates were fabricated by atmosphere plasma spraying. The effects of different interlayers of NiCrAl, NiAl and W/Cu on bonding strength were studied. SEM, EDS and XRD were used to investigate the photographs and compositions of these coatings. The tungsten coatings with different initial particle sizes resulted in different microstructures. Oxidation was not detected in the tungsten coating, but in the interlayer, it was found by both XRD and EDS. The tungsten coating deposited directly onto the copper substrate presented higher bonding strength than those with different interlayers.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.12-23
• /
• 2007

Frequently spraying of natural starch slurry onto the formed wet web has been adopted to improve properties of paperboards. This conventional starch spraying technique, however, becomes less effective in strength improvement. In this study the effects of various factors including wet web dryness, quantity of starch slurry sprayed, and drying temperature on paperboard properties were investigated. Migration of starch granules into the webs appeared to cause a reduction in plybond strength when the web dryness was lower than this level. Wet webs should contain enough water to swell the starch granules, and at the same time they should be heated to a temperature high enough for complete cooking of the sprayed starches to occur. This suggested that preheating of the wet web can be employed to improve the plybond strength.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 추계학술발표대회 개요집
• /
• pp.220-222
• /
• 2001

The average grain size, the grain-size distribution, the morphology and the microstructure are fundamental characteristics of a spraying powder. Now that the significance of the grain size for the pattern of properties of the powder has been recognised, greater consideration is also being given to it in standards and regulations. However, unfortunately, the processes according to which the grain size and the grain-size distribution must be determined are specified in the rarest of cases. The contribution therefore dealt with the comparison of different particle-size measuring techniques, such as diffraction spectroscopy, sedimentation, sieving and microscopic measurement. The comparability of the measured results was investigated on twelve plasma spraying powders with different compositions, nominal sizes and morphologies.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4032-4038
• /
• 2023

Cu, which exhibits excellent corrosion resistance in underground environments, has been investigated as a canister material for use in the deep geological disposal of spent nuclear fuels. In this study, the technical viability of atmospheric plasma spraying for producing Cu-coated canisters was investigated. A high-purity Cu film (millimeter scale) was deposited onto a stainless-steel substrate using a plasma gun with a shroud structure. Potentiodynamic polarization studies revealed that the Cu film exhibited a sufficiently low corrosion rate in the groundwater electrolyte. In addition, no pitting corrosion was observed on the Cu film surface after accelerated corrosion studies. A prototype cylindrical Cu film was fabricated on a 1/20 scale on a stainless-steel tube to demonstrate the scalability of atmospheric plasma spraying in producing Cu-coated canisters.

• Archives of Metallurgy and Materials
• /
• 제67권4호
• /
• pp.1531-1534
• /
• 2022

In this study, a SUS316L membrane having double layered pore structures was fabricated, and the pore characteristics were analyzed after coating with a spherical powder and a flake-shaped powder on a disk-shaped SUS316L support using a wet powder spraying process. The thickness of the coated layer was checked using an optical microscope, and air permeability was measured using a capillary flow porometer. When the coating amount was similar, the fine porous layer prepared using flake powder was thicker and showed higher porosity. In the case of a similar thickness, the case of using flake powder was half of the amount of spherical powder used. Therefore, it was confirmed that it is possible to manufacture a metal membrane having a high filter efficiency even with a small coating amount when using the flake powder.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.541-549
• /
• 2019

Objectives: This study aims to examine patients who developed acute pesticide poisoning while spraying or using pesticide and presented to the emergency department in hospitals in Chungcheongnam-do Province. Based on the findings, this study will provide implications for safety and health management pertaining to the use of pesticides. Methods: Pesticide poisoning data collected by the Chungnam Center for Farmers' Safety and Health from 2014 to 2018 was cross-sectionally analyzed. A total of 331 patients with pesticide poisoning presented to one of hospitals and four of medical centers in the region(Dankuk University Hospital, Gongju and Hongsung, Cheongyang, Cheonan Medical Center). Seventeen of these patients (15 men and two women) developed poisoning while spraying pesticide. The patients' charts were reviewed to collect data on pesticide poisoning, namely currently working in farming-related occupation, means of transportation to the hospital, place of poisoning, symptoms of acute pesticide poisoning, treatment, pesticide used when poisoning occurred, and classification by technical ingredients. Results: Fifteen out of 17 patients who developed poisoning while spraying pesticide were men. Insecticide was used in 35.3% of the cases, and herbicide was used in 29.4% of the cases, which was different from cases of poisoning from ingestion poisoning. The major symptoms were vomiting (35.3%), nausea (29.4%), dizziness (29.4%), and headache (23.5%). A total 11 ingredients were identified in 12 patients, and the most common ingredient was glyphosate, which is an herbicide. Most patients showed a state of mild toxicity, but two patients showed a state of severe toxicity. These patients respectively used glyphosate and paraquat. Conclusions: Our findings can be useful for suggesting the need for a national healthcare system to manage occupational pesticide poisoning among farmers. Further, these findings can be used to increase the awareness of the risk of acute poisoning during pesticide spraying and suggest the need for a safety health education to increase farmers' awareness of pesticide poisoning.

• 한국축산시설환경학회지
• /
• 제15권2호
• /
• pp.99-106
• /
• 2009

방제기 분야에서 전통과 기술력이 인정받고 있는 일본 마루야마사에서 개발한 원거리 고속팬과 비교실험을 하였다. 비교 실험 결과 일본 마루야마사에서 개발한 원거리 팬은 120m 살포를 한 반면 자체 개발한 원거리 방제기 고속팬은 160m 까지 살포가 가능하였다. 지금까지 원거리 방제기는 일본에서 개발된 제품을 수입하여 국내에 보급하였으나 앞으로는 성능, 가격 및 A/S 측면에서 유리한 국산 원거리 방제기가 시장을 점유할 것으로 판단된다. 주요 연구 결과를 살펴보면 다음과 같다. 실험은 시중에서 판매되고 있는 플라스틱컵을 사용하였다. 컵의 배치는 10m 간격으로 종방향 5개, 횡방향 18개 총 90개를 설치한 후 원거리 고속 방제기가 이동하면서 분사한 양을 보고 분포도를 작성하였다. 분무지점에서 분무방향과 수직을 이루는 거리를 5m 간격으로 고정하고, 분무량과 수평을 이루는 지점에 따른 분무량 및 관찰자 4명의 데이터를 이용하여 평균을 구했다. 방제기가 출발하면서 살포한 경우 0m의 경우와 방제기가 정지하면서 살포를 중지한 20m의 경우 살포가 잘 되지 않은 것으로 나타났다. 방제기가 출발하면서 살포한 경우 10m에서 높은 살포량을 나타냈다. 방제기가 15m 이동했을 때 20m 구간에서 가장 높은 살포를 보였다. 실험결과 방제기가 출발하면서 방제한 경우와 방제기가 포착하면서 방제를 정지한 경우를 제외하고 전 구간에서 일본 마루야마사의 방제기 보다 높은 살포량을 보였다.

• 한국환경농학회지
• /
• 제37권3호
• /
• pp.213-220
• /
• 2018

BACKGROUND: This study was carried out to determine characteristics of residual pesticides in time-dependent manner and calculate half-lives of the residual pesticides in fresh and dried Chinese matrimony vine. In addition, processing factors were calculated based on the residual concentrations in them. METHODS AND RESULTS: The test pesticides, etofenprox and fenitrothion, were sprayed onto the Chinese matrimony vine plants at once or twice (at seven-day interval) and then samples were collected at 0 (after 3 hours), 1, 3, 5 and 7 days after the last spraying. Dried samples were prepared in hot-air drying oven at $60^{\circ}C$ for 48 hours until water content of less than 20%. Residual concentrations of etofenprox in fresh and dried samples decreased by 54.0-60.9% after 7 days of the last pesticide-application. In case of fenitrothion, the concentrations were found to have decreased by 69.2-76.5%. Processing factors of etofenprox were 2.6-3.0 for the one-time spraying and 2.5-3.0 for the two-time spraying and those of fenitrothion were found to be 1.5-22 for the one-time spraying and 1.6-2.0 for the two-time spraying. First half-lives of etofenprox and fenitrothion in fresh and dried samples ranged from 5.0 to 6.3 and from 3.4 to 4.0 days, respectively. The third half-lives were found to be 15.0-18.9 and 10.2-12.1 days, respectively. CONCLUSION: Residual concentrations of the tested pesticides in the studied crop decreased, but those in the dried samples appeared to have increased. In addition, processing factor and half life were constant regardless of spraying times.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.23-26
• /
• 1997

Nanophase titania film was obtained by plasma spraying. The structure of titania film was investigated with transmission electron microscopy (TEM). It was found taht the film was composed of grains with mean particle size of 15nm. The crystal structure of nanophase titania film was found to be anatase phase by electron diffraction.