• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.52-59
• /
• 2022

Pest control treatment was carried out using an unmanned automatic pesticide spraying system that can spray pesticides on crops while moving autonomously to control pests in vegetable greenhouse. As a result of examining the control effect on tomato and strawberry on thrips (Frankliniella occidentalis) and greenhouse whitefly (Trialeurodes vaporariorum) pests, 85.6% of yellow flower thrips were found in tomatoes and 87.5% in strawberries, and 81.7% (tomato) and 80.6% (strawberry) of greenhouse whitefly. In addition, the control effect according to the pesticide treatment method showed a control effect of 81.7% of the chemical spraying treatment by manpower and 83.9% of the automatic moving pesticide spraying treatment (F=22.1, p < 0.001). When comparing the control effect between the two treatment sections, there was no significance, but the automatic transfer spraying treatment showed a 2.2% higher effect. On the other hand, as a result of comparing the spraying time of the drug, the automatic unmanned control sprayer had a spraying time of 5 min/10a, which took about 25 min less than the conventional manpower spraying time of 25-30 min/10a. Based on these results, it was judged that the automatic transfer spraying method could be usefully used for efficient pest control in the facility greenhouse during the peak period of development.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.353-362
• /
• 2022

The wet shotcrete refers to a method in which all materials are mixed and then supplied to the spraying device, compressed air is added to the nozzle, and the spraying speed is improved to spray on the target surface. In order to reproduce the amount of shotcrete used in the wet method in the field and the situation at the laboratory scale, it is essential to control the discharge amount of the equipment. In this study, in order to increase the reproducibility of field conditions at the laboratory scale, a flow control system for shotcrete mortar spraying equipment was developed and applied to the equipment. To verify the developed equipment, a discharge control test using water and mortar was performed. In the developed control system, the discharge was smoothly controlled according to the user input value for the mono pump, but the discharge was not properly controlled according to the input value for the screw pump because of a reducer. When a speed reducer is attached, it is necessary to adjust the operation rate of the screw pump close to the target flow rate by increasing the operation rate of the screw pump while lowering the operation rate of the mono pump.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.2
• /
• pp.166-178
• /
• 2024

Objectives: The 12 occupational exposure limits(OELs) for chromium and its compounds in Korea were set by applying the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs). However, this is significantly different from the TLVs after the existing TLVs were integrated and withdrawn in 2018, so it is necessary to review the revision. Methods: Various documents related to chromium OELs were reviewed, including the ACGIH TLV Documentations for chromium and its compounds. A field survey was conducted targeting workplaces handling chromium and its compounds. Based on this, a revised OELs were proposed and a socio-economic evaluation was conducted. Results: The OELs for chromium compounds in Korea was first enacted in 2002, and in 2007, the OELs for chromium (hexavalent) compounds (insoluble) was lowered from 0.05 mg/m³ to 0.01 mg/m³. In 2008, the OELs for strontium chromate was newly established as 0.0005 mg/m³, and in 2018, the OELs for calcium chromate was newly established as 0.001 mg/m³. Total chromium and hexavalent chromium were measured for each of 6 samples at 2 welding sites, 4 plating sites, and 2 spray coating sites. When omparing the average of the results measured by ICP, a total chromium analysis method, and the analysis results by IC, a hexavalent chromium analysis method, only workplace 4 was the same, and total chromium was evaluated more, and total chromium was evaluated at 0.0004 to 0.0027 mg/m³. And hexavalent chromium was evaluated as non-detection ~ 0.0014 mg/m³. Amendment ①: The exposure standard for hexavalent chromium is not divided into water soluble, insoluble, chromium ore processing, and other hexavalent chromium compounds, and is integrated into 0.01 mg/m³, which is the level of chromium (hexavalent) compound (insoluble)., OELs for chromium (metal) and chromium (trivalent) compounds are integrated into chromium (trivalent) compounds, and the exposure level is maintained. Amendment ②: As in the amendment ①, the OELs are integrated, but the level is lowered to 0.005 mg/m³, which is the OELs of OSHA, and there is a grace period of 4 years. Amendment ③: As in the amendment ①, the OELs are integrated, but the level is lowered to 0.0002 mg/m³, which is the exposure standard of ACGIH, and there is a grace period of 5 years. Conclusions: Amendment ①: The change in the OELs is insignificant, so the cost required is small, and the benefit/cost ratio is greater than 1, so there is no problem in applying the amendment. Amendment ②: In all scenarios except chromium 6(insoluble), the benefit/cost ratio is greater than 1, so it is thought that there will be no major problem in applying the amendment. Amendment ③: Since the benefit/cost ratio is less than 1 in all scenarios, it is thought that the total social benefit that can be obtained when applying the amendment is not large.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.327-336
• /
• 2013

This study was conducted to examine the effect of spray-washing old hens (old laying hens, old molting hens and old breeder hens) carcasses with sodium hypochlorite (50 ppm) solution and vacuum packaging on the microbiological and physiochemical quality of breast meat during storage at $4^{\circ}C$. There were no significant differences of cooking loss and texture among breast meats from different birds with spray-washing by water or sodium hypochlorite solution before storage. The numbers of total aerobic bacteria of aerobically packaged and only water-washed breast meat were higher than 7 Log CFU/g (the limitation population for spoilage of meat) after 7 days of storage. However, the numbers of total aerobic bacteria of vacuum packaged breast meat washed by sodium hypochlorite solution were lower than 7 Log CFU/g even after 14 days of storage. The volatile basic nitrogen content of vacuum packaged breast meat were lower than 20 mg% (the limitation value for spoilage of meat) regardless of the washing method, while those of aerobically packaged breast meat washed by tap water and sodium hypochlorite solution were 41.1 and 20.1 mg%, respectively. In addition, lipid oxidation and change of pH in breast meat was inhibited by vacuum packaging when compared with that of aerobic packaged breast meat during storage. Therefore, the results indicated that the washing old hen's carcasses with sodium hypochlorite (50 ppm) solution and vacuum packaging could improve the shelf-life of meat from old birds. This result can provide the basic information for industry, which are seeking for export market.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.49-61
• /
• 1962

The insect Diplosis mori Yokoyama is causing extensive destruction of mulberry trees in Korea with a resultant loss in silk production. This study was made to determine an effective method of control. Methods and Materials Used Preliminary studies were made to determine more exactly the life cycle of the insect. Based on this information, various control measures were tested, including the use of spray methods with BHC and control of larvae by tilling. Results Obtained 1. Life cycle studies (a) In the Suwon area, this-insect has 5 generations per year. The first starts in the later part of June and the final cycle ends in the later part of September. (b) The adult insects appear about 7: 00-8: 00 P.M. and live for 2-5 days. Females live in longer periods than the male. (c) Larvae lives inside the second and third stipules (A. B.) before mulberry leaf development. They cause extensive damage to the leaves at the point where they are attached to the stem. (d) Weather conditions considerably affect the life cycle. The pupa particularly are affected and not be able to change into the moth stage when there is a long period of no rain. (e) Larvae are large......0.3 to 2.0mm......and are milky-white immediately after hatching but turn to pinkish as the worm matures. The matured worm has a jumping ability up to 15-20cm. The worm burrows into the ground 1.5 to 3.0 cm before changing into the pupal stage. (f) The pupal stage usually lasts 7-8 days, in summer weather conditions and the pupa is surrounded with a coarse cocoon. (g) These insects, as a general rule, overwinter as pupae but sometimes as larvae. 2. Control measures (a) BHC dust applied on the ground seem most effective. It should be done 4-5 days after the worm has burrowed into the ground. For this control, it is recommended that 6kg of a 2% formation Tanbo(l0ares) be used. (b) For the effective spraying against the fly, it is recommended that a formulation of liquid BHC spray terials be used at the rate of 400-600 liters per Tanbo. (c) Tillage methods which provide a cover of soil 5cm or more in depth above infested areas will effect-maively prevent the emergence of the fly from the pupal stage. 3. Conclusions Methods of control against Diplosis mori Yokoyama can be tied more closely to the life cycle of the insect with more effective results. Further studies are needed to complete information on possible controls during or after hibernation. Economic studies on the cost of these control measures are also needed.

• Journal of Chest Surgery
• /
• v.37 no.10
• /
• pp.839-844
• /
• 2004

Background: The Y-composite graft of internal thoracic artery and radial artery is commonly used in coronary bypass surgery. The aim of this study is to look for a way to raise the free flow of the internal thoracic graft and to see flow dynamics of the Y-graft. Material and Method: In 15 patients undergoing coronary bypass surgery, free flow of the in-situ internal thoracic artery graft was measured using two different papaverine application methods; extraluminal papaverine spray in 7 patients and intraluminal papaverine injection in 8. In 18 other patients for whom the Y-graft was used, total free flow and flow changes from the two ends were measured. Result: The free flow of the in-situ internal thoracic artery graft almost doubled with internal papaverine injection than with external papaverine spray $(47.7\pm9.6$ mL/min $vs.100.8\pm26.3$ mL/min, p<0.001). Total flow of the Y-composite graft was significantly more than either flow of the internal thoracic artery end or radial artery graft end $(173.3\pm45.3$ mL/min vs. $121.1\pm34.3$ mL/min or $117.5\pm42.8$ mL/min). When both ends of the Y-composite graft were opened, free flows from the two ends were similar $(85.4\pm27.8$ mL/min vs: $87.9\pm42.4$ mL/min, p=0.772). The flow of one end of the Y-composite graft was increased significantly by clamping of the other-end than when both ends were opened. Conclusion: Intraluminal papaverine injection is very effective in raising free flow of the internal thoracic artery graft, and the free flow of the Y-composite graft of in-situ internal thoracic artery and free radial artery graft is more than that of the in-situ internal thoracic artery graft. The flow of one end flow of the Y-graft may be altered by the flow change of the other end.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.8-14
• /
• 2011

This study was conducted to investigate the effect of age of transplants, propagated by cutting, of two cut rose (Rosa hybrida Hort.) cultivars on their subsequent growth and yield in an effort to develop an efficient cutting propagation method for domestic rose cultivars. Two cultivars used in this study were a standard type 'Pink Aurora' and a spray type 'Yellow King'. Cuttings were prepared as single node cuttings each with a five-leaflet leaf and were stuck in rockwool cubes ($5cm{\times}5cm{\times}5cm$, UR, Korea) at two different dates. Cuttings rooted for either 30 (stuck on Jan. 20, 2009) or 48 days (stuck on Jan. 2, 2009) were transplanted into a rockwool slabs ($10cm{\times}15cm{\times}100cm$, UR, Korea) on the same date, 18 Feb. 2009. Plant growth and cut flower quality were investigated for two successive harvests during the period of Jan. to July in 2009. In both cultivars, 48 days old plants showed some growth of the shoot and root before transplanting. However, in the case of 30 days old plants before transplanting no noticeable growth of the shoot and root was obserable in 'Pink Aurora', while only shoot growth, but not root growth to the bottom of the rooting medium, was observed in 'Yellow King'. This suggested cultivar-specific responses that in this experiment a spray type 'Yellow King' showed greater growth rate during the rooting stage than a standard type 'Pink Aurora'. In the measurement of growth and cut flower yield after transplanting, the 48 days old standard type 'Pink Aurora' produced greater number of cut flowers per plant than 30 days old plants, whereas their mean stem fresh weight was recorded smaller than that of the 30 days old plants. For 'Yellow King', 30 days old plants showed greater stem length, flower width, number of five-leaflet leaves per stem, stem fresh weight, and number of cut flowers per plant than 48 days old plants. Therefore, growth and yield were significantly affected by cultivar and age of the rooted cutting, and additional research is needed on the effect of age of rooted cuttings in more cultivars.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.119-123
• /
• 2007

Sprays containing chitosan, grain amino acids, or wood vinegar, were applied to vine leaves of the Campbell Early grape variety, and effects on the quality and storability of grapes were investigated. Weights of grape clusters and individual bemies did not differ significantly from the values seen when traditional agnicultural chemical treatment was used. The percentage of clusters over 300g in weight was, however, higher after spraying with chitosan, grain amino acids, or wood vinegar, than after agricultural chemical treatment, Grape moisture contents, levels of soluble solids, and reducing sugar concentrations, did not differ when the traditional treatment and the newer sparys were compared. Among minerals, the levels of potassium, iron and zinc measured in fresh grapes were increased by the clitosan, grain amino acids, and wood vinegar spray. After 8 weeks of MA storage, reducing sugar levels decreased, and titratable acidities increased, compared to levels measured at the beginning of storage. This was true regardless of the method of vine treatment the hardness of berries decreased slightly over 4-6 weeks of storage, and increased thereafter. The weight losses of grapes were relatively low(0.28-0.35%) on storage after any vine treatment tested. Grapes from vines sprayed with chitosan or grain amino acids showed a lower decay rate than did fruit from vines that had received a traditional agricultural chemical treatment. Sensory evaluation results indicated that the marketability of grapes from vines treated with traditional agricultural chemicals was better than that of grapes from vines sprayed with chitosan, grain amino acids, or wood vinegar.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.263-270
• /
• 2021

This experiment was carried out to determine the effect of CaCl₂ foliar spraying on the inhibition of blossom-end rot (BER) in hot summer paprika (Capsicum annum L. 'Special') cultivation. The effect of CaCl₂ application was examined by the foliar application based on different fruit size, frequency, and spraying time. Also, it was investigated the occurrence and alleviation effect of BER symptom. Foliar application of CaCl₂ (Ca 0.4%) was conducted by treating a fruit and leaf at 4 to 9 nodes above the crown flowers of each plant with 350 mL per week from June 3 to July 1. When the CaCl₂ was sprayed at 7-day intervals for 4 weeks, the Ca content was the lowest in the fruit harvested with BER symptom in 11 to 20 mm of fruit width (FW). Four different regions in both BER symptom and normal fruits showed significant differences of Ca content, the highest was in pedicel, followed by stem-end, middle, and blossom-end. The Ca content increased sharply in normal paprika with 31-40 mm FW, in which Ca content was 78% higher than that of BER. Ca content in the middle and blossom-end of paprika over 21 mm in FW ranged 19.8% to 28.8% in normal fruits and 15.7% to 18.5% in BER, respectively. The incidence of BER increased rapidly by more than 60% in fruits with 31-40 mm FW. While there was no difference in fruit weight among the FW treatment, marketable yield rate was highest in the 21-30 mm FW, and the sugar content was high in the 11-30mm FW. When CaCl₂ was applied three times for 7 days to a paprika having a 21- 30 mm FW, the cell wall-bound (CWB) Ca content was the highest and the rate of BER was lowest with 6.3%. After 10 days of CaCl₂ foliar spray treatment, the CWB Ca content of paprika increased by 2.9 to 3.5 times compared to the control in all treatments. At 7 days after the CaCl₂ foliar spraying once a day at varying spraying time, the leaf burn observed from 9:30 a.m. to 17:00 p.m. and the proline content increased as the spraying time was delayed. Therefore, the CaCl₂ foliar spraying method for reducing of BER occurrence during paprika summer cultivation seems to be appropriate to spray 2-3 times at intervals of 3 days and before 8 a.m. at the time when the FW is 21-30 mm.

• Journal of Food Hygiene and Safety
• /
• v.31 no.3
• /
• pp.186-193
• /
• 2016

An analytical method was developed for the determination of oxathiapiprolin in agricultural commodities. Oxathiapiprolin is a new oomycide (fungicide of piperidinyl thiazole isoxazoline class) which controls downy mildew in cucurbits caused by Pseudoperonospora cubensis (oomycete plant pathogen). Agricultural commodities were extracted with acetonitrile and partitioned with dichloromethane to remove the interference, adjusting pH between 9 and 10 by 1 N sodium hydroxide. After purification by silica SPE cartridge to clean up the interference of organic compounds, they were finally quantified by HPLC-UVD (high performance liquid chromatograph ultraviolet detector) using a wavelength at 260 nm and confirmed by LC-MS (liquid chromatograph mass spectrometer) in electro-spray ionization positive ion mode. The standard calibration curve was linear with coefficients of determination ($r^2$) 1.00 over the calibration ranges (0.025-2.5 mg/L). Recoveries were ranged between 86.7 to 112.7%, with relative standard deviations less than 10% at three concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates. The overall results were determined and estimated according to the CODEX guidelines (CAC/GL40). The proposed method for determination of oxathiapiprolin residues in agricultural commodities can be used as an official method.