• 한국식품저장유통학회지
• /
• 제24권2호
• /
• pp.246-253
• /
• 2017

본 연구에서는 호박고구마의 산업적 이용 증대 및 식품 가공용 소재 개발을 목적으로 분무건조공정을 이용하여 호박고구마 효소 분해물을 분무건조한 다음 물리화학적 특성 및 소화특성을 조사하였다. 호박고구마 효소 분해물의 불용성 식이섬유, 수용성 식이섬유 및 총 식이섬유 함량은 4.17%, 2.07% 및 6.24% 이었다. 호박고구마 효소 분해물의 분무건조분말 제조는 펙틴을 피복물질로 사용하여 분무건조하였으며, 수분함량 및 전분함량은 1.68-2.46 및 45.32-46.51%였다. 색도는 분무건조 분말에서 L 값 및 a 값은 감소하고 b 값은 증가하는 경향을 나타내었다. 입자크기는 분무건조 분말이 $37.17-42.32{\mu}m$을 나타내어 동결건조 분말 $247.79{\mu}m$에 비하여 유의적으로 작은 크기를 나타내었으며, 입자모양은 전반적으로 구형의 형태에 펙틴 첨가량이 증가할수록 굴곡이 증가하였다. 수분흡수지수는 분무건조 분말에서 1.74-1.91로 동결건조 분말 2.15에 비해 낮은 수분흡수지수를 나타내었으며, 수분용해지수는 분무건조 분말에서 80.75-87.61%로 동결건조 분말(70.47%)보다 높게 나타났다. 장 상피세포 부착능은 분무건조 분말에서 2.66-6.18%를 나타내어 동결건조 분말 1.79%에 비해 높은 부착능을 나타내 장 내 유용 미생물의 증식을 촉진함을 확인하였다. 분무건조 분말의 인체 내 소화 모델에서, 펙틴 1% 첨가 분말은 최종적으로 장액에서 70.09%의 소화율을 나타내어 동결건조 분말 24.23%에 비해 인체내에서의 높은 소화율이 기대 되었다. 따라서 분무건조 분말 제조시 식품산업 활용 측면에서 가공적성이 향상되고 in vitro 인체 내 소화모델에서 소화가 개선된 식품가공용 소재 개발에 있어 산업적으로 적용 가능할 것으로 사료된다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.106-110
• /
• 2011

A high thermal conductive AlN composite coating is attractive in thermal management applications. In this study, AlN-YAG composite coatings were manufactured by atmospheric plasma spraying from two different powders: spray-dried and plasma-treated. The mixture of both AlN and YAG was first mechanically alloyed and then spray-dried to obtain an agglomerated powder. The spray-dried powder was primarily spherical in shape and composed of an agglomerate of primary particles. The decomposition of AlN was pronounced at elevated temperatures due to the porous nature of the spray-dried powder, and was completely eliminated in nitrogen environment. A highly spherical, dense AlN-YAG composite powder was synthesized by plasma alloying and spheroidization (PAS) in an inert gas environment. The AlN-YAG coatings consisted of irregular-shaped, crystalline AlN particles embedded in amorphous YAG phase, indicating solid deposition of AlN and liquid deposition of YAG. The PAS-processed powder produced a lower-porosity and higher-hardness AlN-YAG coating due to a greater degree of melting in the plasma jet, compared to that of the spray-dried powder. The amorphization of the YAG matrix was evidence of melting degree of feedstock powder in flight because a fully molten YAG droplet formed an amorphous phase during splat quenching.

• 한국식품저장유통학회지
• /
• 제23권3호
• /
• pp.355-360
• /
• 2016

본 연구에서는 상품과로서 가치가 없어 전량 폐기되고 있는 미숙 무화과를 이용하여 산업적 이용 증대 및 식품 가공용 연육제로의 활용 가능성을 확인하기 위하여 미숙 무화과에 부형제인 maltodextrin을 5%, 10% 및 20%를 첨가하여 혼합한 후 분무건조공정을 이용하여 분말화 하였다. 분무건조 분말의 수분함량은 2.59~2.65%였으며 부형제인 maltodextrin 첨가량이 늘어날수록 색도는 L값이 늘고 a와 b값은 줄어드는 경향을 나타내었고 입자크기는 동결건조 분말($209.67{\mu}m$)에 비하여 $22.18{\sim}37.33{\mu}m$로 유의적으로 작고 균일한 크기였다. 수분흡수지수는 maltodextrin 10% 첨가군이 0.11로 가장 낮았으며 수분용해지수는 99.10%로 가장 높았다. 전체적으로는 분무건조 분말이 동결건조 분말에 비해 수분흡수지수는 낮고 수분용해지수는 높은 경향을 나타내어 산업적으로 이용시 분무건조 분말이 동결건조 분말보다 우수할 것으로 사료된다. 미숙 무화과 분말의 protease 활성은 동결건조 분말(0.92 unit/g)이 분무건조 분말(0.48~0.84 unit/g)보다 유의적으로 높은 활성을 나타내었으나, in vitro 인체 내 소화 모델에 대한 protease 활성은 분무건조 분말에서만 효소 활성이 나타나 낮은 pH에서도 안정함을 확인하였다. 따라서 본 실험결과, 미숙 무화과 분말 제조시 동결건조보다는 maltodextrin을 10% 혼합하여 제조된 분무건조 분말에서 protease활성이 우수하였으며 향후식품가공용 연육제로서 활용이 가능할 것으로 판단되었다.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.101-108
• /
• 1996

In this study, WC-l7wt% Co composite powder for thermal spray was fabricated by spray drying method. The agglomerated composite powder had spheroidal morphology and the particle size distribution was 20~60${\mu}{\textrm}{m}$. WC and Co were distributed homogeneously. However, the strength of the spray-dried agglomerate was low due to the pores within the agglomerate. Therefore, the spray-dried agglomerate was broken down during HVOF thermal spray and the microstructure was inhomogeneous with many pores within the coating layer. And the decomposition of WC to W and $W_{6}$ $C_{2.54}$ was accelerated. The strength and flowability of the agglomerate were greatly improved by sintering heat treatment(110$0^{\circ}C$, 1 hour, hi atmosphere), and then the coating layer showed dense and homogeneous microstructure with well-developed splats. The hardness of the coating layer was H $v_{300}$ = 1072.2.2.

• 대한화학회지
• /
• 제64권5호
• /
• pp.259-266
• /
• 2020

The main purpose of this study is to examine the different physicochemical properties of spray-dried products. The carrier agents and powders after the spray-drying process were analyzed for encapsulation yield, moisture content, color parameters, total polyphenol content (TPC), antioxidant capacity (AC), bulk density, flowability, wettability, hygroscopicity, water solubility index (WSI), particle size and microstructure. The spray-drying process was carried out with different carrier agents including maltodextrin (MD) and the combination of maltodextrin and gum arabic (MD-GA) with MA/GA ratio of 70/30, dried at the inlet/outlet air temperature of 160 ℃/70 ℃, 4 bar, airflow rate of 70 ㎥·h^-1 and feed flow rate of 750 mL·h^-1. The results showed that the different carrier agents have significant influences on the physicochemical properties of the powder produced by the spray-drying method. In there, while the values of recovery efficiency and flowability of spray-dried products from MD are higher than those of spray-dried products from MD-GA combination, the opposite is true for the values of TPC, AC, bulk density and wettability, whereas hygroscopicity and WSI values are equally represented in both products.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.660-664
• /
• 1996

We have studied the test method for strength of spray dried ceramic powder using manual press and UTM. which is one of the important to influence forming process. We could observe the compaction behavior using manual press. However the measurement of granule strength was only possible with UTM capable of providing the condition of a constant pressing rate. The strength of granule can be measured from the slope change of compaction curve and agrees with the value which is obtained from the combination of saturated tap density and compaction curve. So we proposed the accurate method to measure the strength of granule from the results of this study.

• 한국축산식품학회지
• /
• 제30권1호
• /
• pp.28-35
• /
• 2010

This study was designed to compare the physicochemical and nutritional properties between reconstituted milk samples made from freeze-dried milk powder (FDMP) and spray-dried milk powder (SDMP). Reconstituted milk (87%, wb) was made by combining FDMP or SDMP with water. In the color analysis, the $L^*$, $a^*$ and $b^*$ values of the reconstituted milk samples made from both powders were not significantly different from the control. The thiobarbituric acid values and short-chain free fatty acid concentrations were considerably greater in the reconstituted milk made from SDMP than in the milk made from FDMP. The quantities of water-soluble and fat-soluble vitamins in the reconstituted milk samples made from SDMP were significantly lower than those made from FDMP. Based on the findings obtained in the present study, the reconstituted milk made from FDMP appeared to be more resistant to lipid oxidation and exhibited little changes in the nutrients levels when compared with reconstituted milk made from SDMP.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.216-221
• /
• 2015

Sintering behavior of 3%yttria-stabilized zirconia was comparatively studied using a spray-dried powder produced by a domestic and global company. Quality of the sintered block was analysed in terms of relative density, shrinkage rate, grain growth, hardness, and fracture toughness. Relative density, shrinkage rate, and hardness value of the finally sintered block was similar between domestic and global zirconia powder, respectively. But, flexural strength of the domestic powder specimen was about 70% of the sintered block produced by using a global powder. The poor sintering quality of the domestic powder was discussed in relation with compressibility of the spray-dried granule-type powder and the amount of monoclinic phase in the as-received powder.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.446-451
• /
• 2002

지르코니아/알루미나 복합분말의 분무건조로 제조된 과립들의 형상과 성형시 과립 경계면 파괴에 분말의 분산 정도, 결합제의 종류, 그리고 고형분말 함량이 미치는 영향을 관찰하였다. 구형의 과립은 복합분말 슬러리가 완전 분산이 되지 않고 약간의 floc을 형성하고 결합제로서 Polyvinyl Pyrrolidone(PVP)을 사용했을 때 얻어졌다. PVP를 결합제로 사용하고 분말함량이 32.5 vol%인 슬러리로 분무건조한 분말은 성형시 과립경계면이 파괴되어 소결밀도는 99.7%이었고 굴곡강도는 850Mpa이었다.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.353-358
• /
• 2004

Spray drying is a unique drying process for powder production. Spray dried product must be free-flowing in order to fill the pressing dies rapidly, especially in the ceramic production. The important powder characteristics are; the particle size distribu-tion and moisture content of the finished product that can be estimated and adjusted by the spray dryer operation, within limits, through regulation of atomizer and drying conditions. In order to estimate the moisture content of the resultant dried product, we modeled the control system of the drying process using two different Artificial Neural Network (ANN) approaches, namely the Back-Propagation Multiplayer Perceptron (BPMLP) algorithm and the Radial Basis Function (RBF) network. It was found out that the performance of both of the artificial neural network models were quite significant and the total testing error for the 100 data was 0.8 and 0.7 for the BPMLP algorithm and the RBF network respectively.