• 한국추진공학회지
• /
• 제21권5호
• /
• pp.88-96
• /
• 2017

재생냉각 기술을 적용한 스크램제트 엔진 개발의 일환으로 스크램제트 엔진에 사용될 공기 보조형 인젝터(Air-assist type injector)에 대한 연구를 수행하였다. 실험에 사용된 인젝터는 주 유동에 대해 $90^{\circ}$와 $60^{\circ}$의 각도로 분출되는 두 종류의 인젝터를 사용하였으며 측정 방법에는 미 산란(Mie-scattering)을 이용한 가시화 측정방법과 PDPA를 이용한 미립화 측정 방법을 사용하였다. 실험 결과, 공급되는 기체의 압력 증가와 노즐로부터의 거리가 증가할수록 더 좋은 미립화 특성을 보였으며 분출각도가 $60^{\circ}$인 인젝터가 $90^{\circ}$의 인젝터보다 더 좋은 미립화 특성을 보였다.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.201-207
• /
• 2016

Purpose: A water-spraying type automatic glochids removal system for cactus (Opuntia humifusa) stem was developed, and its performance was evaluated. The system was developed to reduce intensive human labor in removing glochids from cactus stem skin without inducing damage prior to further processing into value-added products. Methods: The developed system consists of conveyor and water-spraying systems. The conveyor system delivers cactus stems through water-spraying compartments and finally to a collecting box. In order to remove the glochids, rotating nozzles spray water over all areas (i.e., front and back faces and sides) of the cactus skin under controlled water pressure. Operating conditions such as conveyor speed, water pressure, angle of water-spraying nozzles, distance between conveyor belt and rotating nozzles, and angle of cactus flipping slide were adopted from our previous study and applied on the system design and manufacturing. The performance of glochids removal was evaluated by counting the number of glochids on the cactus stem before and after processing on the system. Results: The developed system performed efficiently and effectively under the pre-studied operating conditions except for the angle of cactus flipping slide. The new system had a glochids removal ratio of 94.1% without damaging the cactus skin. Considering the original number (approximately 30-60) of glochids, the remaining number was low (1-4), and most of them were found at the side edge of the cactus stem. This system can remove glochids from 360 cactus stems in 1 hr regardless of cactus size. Conclusions: The performance of the new system in glochids removal without damaging cactus skin is superior to any other existing device (i.e., brush type, rubber-friction type, and agitation type). The system is expected to be applied in cactus (O. humifusa) processing facilities.

• 한국응용곤충학회지
• /
• 제59권2호
• /
• pp.83-91
• /
• 2020

본 연구에서는 소나무재선충을 매개하는 매개충 솔수염하늘소와 북방수염하늘소에 대하여 무인항공기(무인헬리콥터)를 이용하여 유인항공용 방제 약제의 약효 및 약해를 조사하였다. 약효는 소나무와 잣나무의 수간을 3등분한 곳에 대상 곤충을 케이지에 넣어 매달아 두어 살충효과를 조사하였다. 시험약제로는 티아클로프리드 액상수화제, 아세타미프리드 미탁제, 플루피라디퓨론 액제를 각각 33배로 희석하여 살포하였고, 감수지를 이용하여 살포 약제의 낙하입자를 측정하고 피복도를 조사하였다. 약제 살포에 의한 주변 비산거리 및 비산량을 조사하였다. 세 약제 모두 솔수염하늘소, 북방수염하늘소에 대하여 96%이상의 우수한 살충 효과를 보였다. 낙하입자 분석 결과 낙하입자는 균일한 양상을 보였다. 주변 비산 현상 분석 결과, 약제 살포시 무인헬리콥터 진행방향으로 20 m의 비산을 보였고, 좌우, 후방으로 10 m의 비산이 확인되었다. 낙하입자수에 의한 비산량 조사 결과, 모든 방향에서 5 m내에서 낙하입자지수 6-7이였고, 10 m지점에서는 낙하입자지수 2를 기록하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.61-62
• /
• 2007

HVOF thermal spray coating of micron size Co-alloy powder has been studied for the durability improvement of high velocity spindle (HVS). Optimal coating process of this system for the best surface properties is hydrogen flow rate 75 FMR, oxygen flow rate 38-42 FMR, feed rate 30 g/min at spray distance 5 inch. Friction coefficient (FC) and wear trace (WT) decrease increasing coating surface temperature from 25$^{\circ}$C to 538$^{\circ}$C due to the higher lubricant effects of the oxides at the higher temperature. At the study of adhesion of T800 coating on a light metal alloy Ti-6Al-4V (Ti64) tensile bond strength (TBS) and tensile fracture location (TFL) of Ti64/T800 are 8,740 psi and near middle of T800 coating respectively. This shows that adhesion of Ti64/T800 is higher than the cohesion strength (8,740 psi) of T800 coating. Therefore T800 coating is strongly advisable for the surface coating on HVS such as high speed air-bearing spindle.

• 청정기술
• /
• 제26권1호
• /
• pp.1-6
• /
• 2020

초임계 용액 급속팽창법(rapid expansion of supercritical solution, RESS)으로 몰시도민(molsidomine, MOL) 약물이 로딩 된 퍼아세틸-β-사이클로덱스트린(PAc-β-CD) 나노 입자를 제조하였다. 입자는 초임계 용액을 공기 중으로 급속하게 팽창시켜 제조하였다. MOL과 PAc-β-CD (0.5, 1 wt%)의 농도, 추출 온도(45 ~ 60 ℃), 모세관 노즐의 길이(5 ~ 20 mm) 및 내경(Inner diameter, ID) (50 ~ 150 μm), 그리고 분사 거리의 변화에 따라 형성된 입자의 크기와 모폴로지를 조사하였다. MOL과 PAc-β-CD의 상호작용을 ¹H-NMR 분광법으로 확인하였고, 입자 크기는 주사 전자 현미경으로 측정하였다. 온도를 45 ℃에서 60 ℃로 올리거나 노즐 내경을 150 μm에서 50 μm로 줄이면 입자 평균 크기가 증가하였으며, 반면에 일정한 압력(34.5 MPa)과 온도(45 ℃)에서 분사 거리를 늘리면 입자 평균 크기가 감소하는 효과를 나타내었다. 0.5 wt%의 PAc-β-CD 농도로서 초임계 공정을 진행한 결과, 모세관의 길이가 짧고(5 mm) 내경이 작은(50 μm) 조건에서 크기가 가장 작은(165 nm) 입자가 얻어졌다. 제조한 나노 입자는 오일 내에서 분산성과 용해도가 증가하였으며, 포접체 입자에서 MOL이 방출되는 시간이 지연되는 것을 확인하였다.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.437-443
• /
• 2017

SiC-based composite materials with light weight, high durability, and high-temperature stability have been actively studied for use in aerospace and defense applications. Moreover, environmental barrier coating (EBC) technologies using oxide-based ceramic materials have been studied to prevent chemical deterioration at a high temperature of $1300^{\circ}C$ or higher. In this study, an ytterbium silicate material, which has recently been actively studied as an environmental barrier coating because of its high-temperature chemical stability, is fabricated on a sintered SiC substrate. $Yb_2O_3$ and $SiO_2$ are used as the raw starting materials to form ytterbium disilicate ($Yb_2Si_2O_7$). Suspension plasma spraying is applied as the coating method. The effect of the mixing method on the particle size and distribution, which affect the coating formation behavior, is investigated using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. It is found that the originally designed compounds are not effectively formed because of the refinement and vaporization of the raw material particles, i.e., $SiO_2$, and the formation of a porous coating structure. By changing the coating parameters such as the deposition distance, it is found that a denser coating structure can be formed at a closer deposition distance.

• 한국환경보건학회지
• /
• 제45권4호
• /
• pp.370-380
• /
• 2019

Objective: This study was performed to investigate the distribution of individual exposure characteristics according to an exposure assessment classification for humidifier disinfectant and to identify the factors that influence assessment classification. Methods: We examined the exposure characteristics of 4,482 subjects who applied for the 4-1 and 4-2 assessments of environmental exposure to humidifier disinfectant conducted by the Korea Environmental Industry & Technology Institute (KEITI). Environmental exposure assessment classification was assessed using the following seven criteria: 1) Distance from humidifier to face; 2) Spray direction; 3) Time used, daytime 4) Time used, during sleep; 5) Time used, cumulative; 6) Exposure intensity; and 7) Cumulative exposure level. Each criteria was then classified as 'high' or low'. When participants answered for more than four criteria, exposure assessment was determined as 'definite,' 'probable,' or 'possible' depending on the ratio of 'high' responses. If participants' responses were inconsistent, exposure assessment was listed as 'unlikely.' If participants answered for less than four criteria, exposure assessment was considered 'indeterminate.' Results: For the exposure assessment classes, definite was assigned to 38.5% (1,725 subjects), probable assigned to 32.9% (1,474 subjects), 25.0% (1,122 subjects) were assigned to as possible, unlikely assigned to 0.1% (3 subjects), and indeterminate assigned to 3.5% (158 subjects). Overall, participants who used 'Oxy Ssakssak New Gaseupgi Dangbun,' 'Aekyung Gaseupgi Mate,' 'Homeplus Gaseupgi Chungjungje,' and 'E-Mart Gaseupgi Salgyunje' totaled 2,996, 557, 176, and 162 subjects, respectively. There was a statistical difference in the type of humidifier disinfectant products between high-exposed and low-exposed participants. Based on the assessment criteria of humidifier disinfectant exposure, subjects were likely to be in the highly exposed classes (definite and probable) when the subjects were exposed 1) for more than ten hours per day and 2) for more than four hours at night 3) when the total cumulative exposure time was higher than the average, 4) when the direction of humidifier spray was toward the face, 5) when the respiratory position was less than 1 meter of distance from the humidifier, 6) when the concentration of indoor contaminants (ug/m3) was higher than the average exposure intensity, and 7) when overall exposure level ($ug/m3^*hr$) was higher than the average exposure level. Conclusion: This study suggests that each exposure assessment criteria was able to appropriately estimate cumulative exposure levels.

• 생물환경조절학회지
• /
• 제13권4호
• /
• pp.185-193
• /
• 2004

배의 과경부에 지베렐린을 처리하면 과실비대에 효과는 있으나 저장성이 떨어지는 단점이 있다. 본 시험은 지베렐린 처리가 저장성을 향상시키기 위하여 폴리아민의 처리부위와 처리농도에 따른 과실의 특성변화를 조사하였다. 시험품종은 '황금배', '영산배', '추황배'로 하여 제베렐린을 만개 30일 후에 처리하고 폴리아민을 수확 7일 전에 과총 엽과 수관에 100, 200, 500ppm으로 엽면살포 하였다. 지베렐린 처리에 의하여 과중은 모든 품종에서 $10\%$ 정도 커졌고 경도는 $0.3\~0.4kg/\phi5mm$만큼 낮아졌으나 당도와 식미는 차이가 없었다. 과경부의 형태적 특성은 지베렐린 처리가 무처리에 비하여 수(髓, pith) 부분에서 내피세포까지의 거리와 내피에서 표피세포까지의 거리가평균 $42.0\%$신장되어 양 수분의 이동이 활발해지고 그에 따른 공급량이 많아져 과실의 무게가 비대해 진 것으로 추정할 수 있었다. 저장 30일 후 과실의 특성을 보면 '황금배'는 과총엽 살포의 스퍼미딘 200ppm이, 수관살포는 스퍼미딘 500ppm에서 과육의 경도가 높게 유지되어 식미가 양호하였다. '영산배'와 '추황배'도 비슷한 경향으로 주당 살포량이 적은 과총엽 200ppm살포처리가 저장성 증진에 효과적이었다.

• 한국응용곤충학회지
• /
• 제62권3호
• /
• pp.139-147
• /
• 2023

진딧물 방제제 개발을 위해 In vitro 경엽살포 검정방법이 널리 사용되고 있다. 이러한 신소재 진딧물 방제 제형은 종합방제와 화학농약의 대안으로 많은 연구가 진행되고 있다. 하지만, 경엽살포 검정방법은 환경이 조절되는 실내에서도 진딧물의 증식과 살충에 영향을 받는다. 본 연구에서는 담배를 기주로 하여 솜과 한천방법을 이용하여 진딧물 방제제 검정을 위한 최적 경엽살포 확립하고자 하였다. 진딧물 검정 챔버에 솜과 한천을 넣은 후 담배 잎과 진딧물 3-4령 약충을 접종하였다. Water-sensitive paper를 이용하여 경엽살포 시에 가장 표면 피복이 높은 최적 경엽살포 거리와 살포량을 확립하였다. 대조구로 물을 처리한 구에서 한천 방법이 솜 방법에 비해 살충율이 낮고, 증식율이 높았다. 솜 검정 방법에는 곤충 검정 챔버의 상대습도를 60% 이상 유지시켰을 때 가장 최적 조건이었지만, 한천 검정 방법에서는 한천의 농도에 상대습도 차이가 없었다. 최적화된 조건하에서 대조화학 농약, Sulfoxaflor, 경엽살포 시 솜 방법에서 살충율이 한천방법보다 빨랐지만, 최종 살충율은 통계적으로 유의하지 않았다. 본 연구는 살진딧물 물질을 검정 시 재현성과 활용성이 가능한 최적화된 증식율과 살충율 검정 조건을 제시하였다.