• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.286-290
• /
• 2007

Biocompatible Hydroxy apatite (HAp) coatings on metallic substrate by plasma spray techniques have been developed. Long-term credibility of plasma spray HAp coatings has been evaluated in physiological saline by electrochemical measurements. It was found that the corrosion resisitance of SUS316L based HAp/Ti conbined coatings was excellent even after more than 10 weeks long-term immersion. It was shown that postal heat treatment improved both the crystallinity and corrosion resistance of HAp. By lowering cooling rate during heat treatment process, less cracks produced in HAp coating layer, which lead to higher credibility of HAp during immersion in physiological saline. The ICP results showed that the dissolution level of substrate metallic ions was low and HAp coatings produced in this research can be acceptable as biocompatible materials. Also, the concentration of dissolved ions from HAp coatings with postal heat treatment was lower compared to those from samples without postal heat treatment. The adherence of HAp coatings with Ti substrate and other mechanical properties were also assessed by three-point bending test. The poor adhesion of HAp coating to titanium substrate can be improved by introducing a plasma spray titanium intermediate layer.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2310-2318
• /
• 2004

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 400 bar to 800 bar by using a common rail injection system. Also, we conducted simulation study by modified KIVA-II code. The results of simulation study are compared with experimental results. The images of liquid and vapor phase for free spray were simultaneously taken by exciplex fluorescence method. As experimental results, the vapor concentration of injected fuel is leaner due to the increase of atomization in the case of the high injection pressure than in that of the low injection pressure. The calculated results obtained by modified KIVA-II code show good agreements with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1019-1029
• /
• 2008

In this study, visual investigation of sprays and flames has been performed and soot formation in Diesel and GTL fuels has been compared in a specially designed Rapid Charging Combustion Vessel (RCCV) under various ambient gas $O_2$ concentrations and two injection pressures. It has been concluded that soot in the mixing-controlled combustion of Diesel and GTL fuels has similar tendency to be formed in the leading portion of the jet boundaries. Auto-ignition delay for GTL fuel is shorter than that for diesel fuel. The temporal and special variation of soot concentration in the diesel flame jets at various $O_2$ concentrations was correlated with the heat release rate. Soot concentration appears in the regions when diffusion combustion starts, and its concentration reaches maximum at the peak of heat release curve and then decreases due to oxidation. Visualization by shadowgraph method showed that soot decreases with lower $O_2$ concentration, and higher injection pressure.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.296-305
• /
• 2017

Background: Surfactant-containing water sprays are commonly used in coal mines to collect dust. This study investigates the dust collection performance of different surfactant types for a range of coal dust particle sizes and charges. Methods: Bituminous coal dust aerosol was generated in a wind tunnel. The charge of the aerosol was either left unaltered, charge-neutralized with a neutralizer, or positively- or negatively-charged using a diffusion charger after the particles were neutralized. An anionic, cationic, or nonionic surfactant spray or a plain water spray was used to remove the particles from the air flow. Some particles were captured while passing through spray section, whereas remaining particles were charge-separated using an electrostatic classifier. Particle size and concentration of the charge-separated particles were measured using an aerodynamic particle sizer. Measurements were made with the spray on and off to calculate overall collection efficiencies (integrated across all charge levels) and efficiencies of particles with specific charge levels. Results: The diameter of the tested coal dust aerosol was $0.89{\mu}m{\pm}1.45$ [geometric $mean{\pm}geometric$ standard deviations (SD)]. Respirable particle mass was collected with $75.5{\pm}5.9%$ ($mean{\pm}SD$) efficiency overall. Collection efficiency was correlated with particle size. Surfactant type significantly impacted collection efficiency: charged particle collection by nonionic surfactant sprays was greater than or equal to collection by other sprays, especially for weakly-charged aerosols. Particle charge strength was significantly correlated with collection efficiency. Conclusion: Surfactant type affects charged particle spray collection efficiency. Nonionic surfactant sprays performed well in coal dust capture in many of the tested conditions.

• 한국분무공학회지
• /
• 제1권4호
• /
• pp.1-7
• /
• 1996

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 추계 학술발표강연 및 논문개요집
• /
• pp.96-96
• /
• 2001

• 한국식품영양과학회지
• /
• 제26권1호
• /
• pp.81-86
• /
• 1997

대추를 이용한 가공제품의 하나로서 분무건조에 의한 분말음료의 개발을 시도하였다. 대추 추출액은 그 자체로는 모든 농도 범위에서 분무건조 하기가 불가능하였고 건조보조제의 첨가에 의해서 분말음료로의 제조가공이 가능하였다 대추 추출액은 26。Bx 농도까지 농축시키고 알맞은 건조보조제를 첨가하여 최종농도를 30。Bx로 조정하여 분무 건조시켰다 첨가되는 건조보조제의 양은 대추 추출액과 건조보조제의 비율이고 형물 기준으로 1:1정도까지 흔합했을때 건조가 용이하고 얻어지는 제품의 품질이 양호하였다. maltose, 농축유, gum arabic, dextrin등의 건조보조제를 검토한 결과 maltose와 gum arabic을 흔합하여 사용할 때 제품의 관능적 특성이 가장 우수하였다. 대추 추출시의 효소처리는 수율을 13~39% 향상시 킬 수 있었다. 그렇지만 효소처리가 분말대추음료의 관능적인 특성에 부정적인 영향을 나타내었으며 추출수율 향상을 위해 사용되어진다면 품질열화가 적은 pectinase의 0.5% 처리가 가장 바람직한 것으로 나타났다.

• 한국식품과학회지
• /
• 제29권6호
• /
• pp.1322-1326
• /
• 1997

미세캡슐화를 위한 기초 연구로 다양한 다당류의 점도를 측정하고, 분무건조법을 이용하여 미세캡슐을 제조하여 특성을 비교하였다. 10% maltodexrin의 점도는 2.2 mPa.s, 10% gum arabic은 9.2 mPa.s, 10% dextran은 13.0 mPa.s, 1% gum locust bean은 4660.0 mPa.s, 1% gum karaya는 77.0 mPa.s로 측정되었다. 분무건조기를 이용하여 제조한 각종 다당류의 미세캡슐을 전자현미경으로 관찰한 결과, gum arabic은 20%의 농도에 비하며 30%에서 입자가 크게 형성되었으나 40%에서는 섬유상의 늘어진 형태가 관찰되었다. Maltodextrin 30%메서 고른 분포의 원형 입자가 관찰되었으며, 40%의 농도에서는 다양한 크기의 입자가 뭉쳐서 관찰되었다. Dextran은 20%에서 구형의 캡슐이 골고루 관찰되었으나, 30%이상의 농초에 서는 섬유상의 형태가 관찰되었다. Gum arabic : maltodextrin (1:3, w/w) 경우에서는 20%, 30%, 40%농도에서 구형의 캡슐이 고르게 관찰되었고 농도가 높을수록 입자의 크기가 증가하였다.

• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2007

The spherical NiZn ferrite particles were prepared by ultrasonic spray pyrolysis with mixed solution of aqueous metal nitrates. The NiZn ferrite particle was observed with nano-sized primary particles of about 10 nm or less before annealing which represented as paramagnetic behavior measured at 77 K and room temperature. The typical abnormal growth of primary particles like polyhedral primary particles was observed by annealing at 1273 K with Zn-concentration dependency. The XRD patterns showed good crystallinity of NiZn ferrite powder after annealing. In annealing process, the intra-particle sintering phenomenon was observed and the spherical particle morphology was collapsed at 1673 K. The saturation magnetization of NiZn ferrite powder for each annealing temperature was decreased with measuring temperature of $77{\sim}$300K.

• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.196-200
• /
• 2015

In this paper, we fabricated flexible antenna radiator using the CNT/PVDF (carbon nanotube / polyvinylidene fluoride) composite film. We used polymer film as a matrix material for the flexible devices, and introduced CNTs for adding conductivity into the film resulting in obtaining performances of the antenna radiator. Spray coating method was used to form the CNT/PVDF composite radiator, and pattern formation of the radiator was done by shadow mask during the spray coating process. We investigated the electrical properties of the CNT/PVDF composite films with the CNT concentration, and also estimated the radiator performance. Finally we discuss the feasibility of the CNT/PVDF composite radiator for the flexible antenna.