• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.197-202
• /
• 2009

Based on the insecticidal efficacy by insecticide treatment methods, neurophysiological responses were compared with the larvae of diamondback moth (DBM) and beet armyworm (BAW) using pyrethroids working on nervous system. By body spray method, all pyrethroids were showed lower insecticidal activity below 50% on the larvae of DBM and BAW. By leaf dipping method, DBM larvae were showed the insecticidal activity as 100% at 50 ppm deltamethrin, 80.0% at fenvalervate and 63.3% at permethrin. However, BAW larvae were showed lower insecticidal activity as similar as control in all concentration. In order to examine electrophysiological response on nervous system on DBM and BAW larvae when treated three insecticides, we investigated the voltage and reaction degree. The voltage of DBM were responded as high as $10^{-7}M$ in deltamethrin, $10^{-5}M$ in fenvalerate and $10^{-3}M$ in permethrin. However, those of BAW were showed dull responses with small variation of voltage to all three insecticides.

• Research in Plant Disease
• /
• v.22 no.4
• /
• pp.293-296
• /
• 2016

In late June 2016, stalk rot symptoms were observed on five vatieties of sorghum (Sorghum bicolar) at organic paddy-upland rotation system in Anseong city, Korea. The initial symptom on stalk surfaces was red color with a dark red spot lesion. A fungus was isolated from the initial lesion, and cultured on potato dextrose agar. Size of microconidia mostly extend to $5-19{\times}2-{\mu}m$ in culture, with 0-1 septa and macroconidia extend to $29-52{\times}3-4{\mu}m$ with 4-6 septa. Pathogenicity was investigated using conidial suspension spray to seedling of sorghum. After 3 days of inoculation, the dark red lesion was produced on stalks. On the basis of mycological characteristics, pathogenicity, and internal transcribed spacer (ITS) rDNA sequence analysis, this fungus was identified as Fusarium thapsinum. This is the first report of stalk rot on sorghum caused by F. thapsinum in Korea.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.66-73
• /
• 2010

Field trials were conducted in Suwon, Andong, Bongwha and Taean to evaluate an anthracnose forecaster in the integrated pest management system (IPM) including anthracnose, Phytophthora blight and tobacco budworm for hot pepper in 2008-2009. Percentage of diseased fruits by pepper anthracnose and yield were compared among three treatments, no-fungicide, forecaster and conventional. The incidence and yield of the forecaster at Bongwha on two varieties were 3.1-3.5% and 30-33 kg/40 plants. These were little less than those of the conventional's 0.3-0.8% and 35-36 kg/40 plants and much higher than those of the no-fungicide's 23-27% and 18-24 kg/40 plants. The number of spray at the forecaster was 5 times, whereas those at the conventional was 11-19 times depending on the farmers. In addition, the results of an anthracnose forecaster at the other three field trials allowed in protecting hot pepper from anthracnose while reducing the amount of pesticides used and the total cost of the pathogen control. However, it is needed to improve for anthracnose forecaster when anthracnose pressure was high such as Taean where 60-80% of the incidence. Because the control values of the forecaster at Taean were between those of no-pesticide and conventional treatment at best. If anthracnose is severe early in the season, additional preventive control should be considered when the fruits were fully grown yet.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2014

The common-rail injectors are the most critical component of the CRDI diesel engines that dominantly affect engine performances through high pressure injection with exact control. Thus, from now on the advanced combustion technologies for common-rail diesel injection engine require high performance fuel injectors. Accordingly, the previous studies on the numerical and experimental analysis of the diesel injector have focused on a optimum geometry to induce proper injection rate. In this study, computational predictions of performance of the diesel injector have been performed to evaluate internal flow characteristics for various needle lift and the spray pattern at the nozzle exit. To our knowledge, three-dimensional computational fluid dynamics (CFD) model of the internal flow passage of an entire injector duct including injection and return routes has never been studied. In this study, major design parameters concerning internal routes in the injector are optimized by using a CFD analysis and Response Surface Method (RSM). The computational prediction of the internal flow characteristics of the common-rail diesel injector was carried out by using STAR-CCM+7.06 code. In this work, computations were carried out under the assumption that the internal flow passage is a steady-state condition at the maximum needle lift. The design parameters are optimized by using the L16 orthogonal array and polynomial regression, local-approximation characteristics of RSM. Meanwhile, the optimum values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance (ANOVA). In addition, optimal design and prototype design were confirmed by calculating the injection quantities, resulting in the improvement of the injection performance by more than 54%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.124-124
• /
• 2018

Polydopamine은 수중 접착력, 친환경 접착제, nanoparticle absorption 등 다양한 특성으로 많이 연구되고 있는 소재이다. 본 연구에서는 dopamine을 이용하여 수중 금속을 흡착시키는 thin film을 제작하였다. 종래의 Polydopamine coating 방법으로 wet coating 이 사용되고 있다. 하지만 wet 방식의 경우 시간이 오래 걸릴 뿐만 아니라 in-line, roll to roll 방식을 적용하는 것이 어렵기 때문에 생산적이지 않다. 이에 본 연구에서는 Atmospheric Pressure Plasma(APP)를 이용 하여 Polydopamine-like film을 coating 하였다. APP의 경우 vacuum system, solution tank가 필요 없고 in-line, roll to roll 방식을 적용 할 수 있기 때문에 더 경제적이고 생산적인 공정이다. 또한 기존의 Plasma polymerization 방법은 Plasma energy가 높기 때문에 source의 분자구조가 바뀌거나 atom 단위로 분해된다. source의 분자구조가 바뀌는 "Atomic polymerization", Neiswender-Rosskamp Mechanism이 적용되면 wet 방식 coating한 film과는 다른 특성을 갖게 된다. 하지만 APP polymerization은 Plasma energy가 vacuum plasma 보다 매우 낮기 때문에 stile polymerization mechanism을 구현 하는데 적합 하다. stile polymerization mechanism은 Plasma 내부에서 polymer source를 분해 성장 시켜서 Polymer film 얻는 것이 아닌 source의 분자구조가 깨지지 않으면서 polymer growing 시키는 방법이다. dopamine source의 분자구조를 최대한 유지하려고 하는 이유는 metal absorption과 같은 특성이 dopamine chemical structure에 영향을 받기 때문이다. 많은 논문들에서 dopamine의 catechol group이 metal absorption, adhesion force에 영향을 주는 주요 인자라고 주장하고 있기 때문이다. 그래서 본 논문에서는 Dopamine source의 형태를 보존하면서 Polymerization 하는 방법으로 APP process를 사용 하여 낮은 전압에서 Polydopamine-like film을 제작 하였다. APP system 의 Plasma 방전부 에 Dopamine source를 유입하기 위하여 본 논문에서는 Piezo Spray 방식을 사용 하였다. Dopamine을 evaporator 하는 것이 어렵고 chemical composition이 유사한 monomer를 사용해서 Plasma Polymerization으로 Dopamine 분자 구조를 재현하는 것도 어렵다. 그래서 본 연구에서는 Dopamine을 water에 immerse 하고 Dopamine solution을 mist 상태로 만들어서 Plasma discharge area에 유입하였다. 이러한 방법으로 만들어진 film은 Polydopamine film은 아니지만 Polydopamine film과 유사한 Chemical composition, chemical structure, metal absorption을 갖는 것을 FT-IR, SEM, XPS을 이용 하여 확인 하였다. Dopamine source의 보존에 대하여 명확하게 확인하기 위하여 FT-IR을 측정 하였다. 전압에 따른 Benzene ring, hydroxyl group의 비율을 확인 하였다. 낮은 전압으로 coating 된 Polydopamine-like film 일수록 hydroxyl group peak($3400{\sim}3000cm^{-1}$)과 비교하여 Benzene ring peak($1600{\sim}1580cm^{-1}$ and $1510{\sim}500cm^{-1}$)이 흡수를 더 많이 하는 것을 확인 할 수 있다. 이것은 Benzene ring이 파괴되지 않고 보존되는 것을 보여준다. Dopamine에서 Benzene ring은 absorption main factor인 catechol에 있는 chemical structure이다. 즉 Benzene ring peak이 높을수록 Catechol이 잘 보존 되었다는 의미 이다. Catechol의 보존은 absorption main factor가 보존 된다는 의미 이다. 이러한 Polydopamine-like film으로 As, Cr, Mg, Cu 200ppm solution에 대한 filtration 능력을 확인 하였다. As, Cr, Cu, Mg 의 제거율이 각각 약25%, 35%, 45%, 65%인 것을 확인 하였다. 이 수치는 시중에 판매되는 제품들과 비교했을 때 300%~500% 향상된 수치 이다.

• Solar Energy
• /
• v.15 no.3
• /
• pp.3-14
• /
• 1995

The Direct Contact heat Exchanger(DCHX) has been widely studied in the chemical industry for many years due to its inherent simplicity as a counter-current divice for heat and mass transfer. In many solar systems, the DCHX unit can be combined with the thermal storage unit, or alternatively, it can be used separately from the storage unit, much like an external(to storage) closed heat exchanger system. In the present work, the spray column type of direct contact heat exchangers are studied extensively to harness the solar energy for hot water and spaced heating. Some of the major considerations that are involved in the design of heat exchangers in this study are that : working fluid is a hydrocaabon(such as Texaterm) or water which is either lighter or heavier than storage medium. The experimental data have revealed some interesting characteristics concerning the application of DCHXs for solar energy utilization. These experiments are carried out in the line of solar heating system, major results are as follows : 1) the flow and aspect of working fluid drop for maxium heat transfer 2) efficiency and volumetric heat transfer coefficient of D.C.H.X with a heavier working fluid are higher than those of D.C.H.X with a lighter working fluid.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.779-783
• /
• 2004

New food ingredient was developed to eradicate and protect against re-infection of Helicobacter pylori in fermentation broth of lactic acid bacteria (LAB) showing antimicrobial activity against pathogenic microorganisms such as H. pylori and Listeria monocytogenes. LAB strain CBT SL4 was identified as Pediococcus pentosaceus by 16S rDNA sequencing and its culture broth showed antimicrobial activity of 800 AU/mL against H. pylori in optimized fermentation process. Using thin layer concentration system and spray-typed fluid bed drier system, concentrated powder product showing activity of 12,800 AU/g was harvested. Product showed eradication and protection activities against H. pylori infection on feeding test (50 AU/day) using Mongolian gerbil infection model. After 4 weeks therapy of 8,000 AU/day, ${\Delta}13CO_2$ level (DOB30) decreased about 40% in urea breath test on patient with H. pylori infection. Result show concentrated culture product of P. pentosaceus CBT SL4 has eradicating and protecting activities against H. pylori infection and can be used as food-active ingredient for prevention of gastric and duodenum ulcer caused by H. pylori.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.187-194
• /
• 2018

This study was conducted to investigate the facilities, cultivation, postharvest management, and distribution status of 27 cut chrysanthemum farms in Korea. The 60% of farms have cultivated the cut chrysanthemum using soil fertigation system in the PE plastic house. In Jeonnam and Busan provinces, Standard type of chrysanthemum was cultivated mainly than spray type of chrysanthemumJeoas. Most farms have been producing the rooted cuttings by plug system using cuttings self-propagated or purchased from the company, but farms in Jeonnam have been planting cuttings directly on cultivation bed. And the 66.6% of cut chrysanthemum farms have been pretreating with dipping in hot water or tap water after harvesting. Precooling was not performed on 70.4% of the farms, and precooling farms have been mainly conducted at temperature of $2-4^{\circ}C$. After harvesting, 70.4% of the farms stored the cut flowers at $2-4^{\circ}C$ for more than 48 hours to control the distribution volume. Cut chrysanthemum was graded mainly by individuals before distribution, and some export farmers have been conducting the cooperative grading. In distribution, all farms have distributed the cut flowers to the domestic markets, and 44.4% of these farms have been also exporting. The 63.0% of farms distributed to domestic market have been trading with flower auction sites.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.193-198
• /
• 2021

Recently, interests in the 4th industry have increased the level of demand for pest control by farmers in the field of rice farming, and the interests and use of agricultural pest control drones. Therefore, the diversification of agricultural control drones that spray high-concentration pesticides and the increase of agricultural exterminators due to the acquisition of national drone certifications are rapidly developing the agricultural sector in the drone industry. In addition, as detailed projects, an effective platform is required to construct large-scale big data due to pesticide management, exterminator management, precise spraying, pest control work volume classification, settlement, soil management, prediction and monitoring of damages by pests, etc. and to process the data. However, studies in South Korea and other countries on development of models and programs to integrate and process the big data such as data analysis algorithms, image analysis algorithms, growth management algorithms, AI algorithms, etc. are insufficient. This paper proposed an online drone pest control management information platform to meet the needs of managers and farmers in the agricultural field and to realize precise AI pest control based on the agricultural drone pest control processor using drones and presented foundation for development of a comprehensive management system through empirical experiments.

• Journal of Korea Foundry Society
• /
• v.43 no.3
• /
• pp.107-136
• /
• 2023

Natural silica sand was commonly used for sand casting of cast steel products, and chromites sand was used to suppress seizure defects due to the lack of thermal properties of silica sand. However there are disadvantages such as deterioration by repeated use, system sand mixing problem, difficulty separating and removing, increased during mold according to high density and to being waste containing chrome. Recently, industrial waste reduction and atmospheric environment improvement have been highlighted as important tasks in the casting industry. In order to solve the problems that occur when using foundry Sand and to improve the environment of casting factories, various artificial sands that can be applied instead of natural silica sand have been developed and introduced. Artificial sands can be classified into artificial sand manufactured by the electric arc atomization or gas flame atomization, artificial sand manufactured by the spray drying & sintering process, artificial sand manufactured by the sintering & crushing process and exhibit different physical properties depending on the type of raw-minerals and manufacturing method. In this study, comparative evaluation tests were conducted on the physical properties of various foundry sands, mold strength, physical durability, thermal durability, and casting test pieces. When comprehensively considering the actual amount of molding sand used according to density, the mold strength according to the shape of sand, the physical and thermal durability of foundry sand, and the heat resistance characteristics of foundry sand, 'Molten artificial sand A1' or 'Molten artificial sand B' is judged to be the most suitable spherical artificial sand for casting of heavy steel castings.