• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.427-433
• /
• 2017

고강도 재료나 열전도성이 낮은 재료의 밀링 가공시 가공 부위에서 발생하는 높은 마찰열로 인해 공구 파손 등이 심각하게 발생할 수 있으므로 절삭유 공급이 매우 중요하다. 기존의 절삭유 공급 방식은 수동식 관절 구조를 활용한 방법으로 과도한 양을 분사함에도 불구하고 효과적인 결과를 얻기 힘들었다. 또한, 작업 중 비산으로 인해 작업장 환경에도 큰 악영향을 미쳤다. 이에 본 연구에서는 자동으로 분사 위치 조절이 가능한 장치에 기반하여 절삭유 분사위치에 따른 STS316L 의 밀링가공 특성을 분석하였다. 그 결과, 절삭유 공급 위치 변화에 따라 공구 마모와 표면 거칠기 변화가 관찰되었으며 이를 통해 제작된 장치의 효용성을 보였다.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.55-60
• /
• 2008

본 연구는 수분무 소화설비의 효용성에 대한 기초평가를 수행할 목적으로 FDS 수치시뮬레이션을 수행하였다. 화재강도(20MW, 50MW) 및 풍속의 변화에 따른 화재시 온도 및 연기농도에 대한 안전성 확보 효과를 분석하였다. 터널내 풍속이 없는 경우 수분무는 냉각효과에 의한 온도 및 연기농도 감소효과가 아주 우수하여 대피자의 안전성 확보에 효과적이었다. 화재강도가 커질수록 연기이동 억제효과는 감소한 결과를 나타났다. 또한 터널내 기류가 존재하는 경우에는 냉각효과에 의해서 연기의 성층화를 교란하며, 대피시 가시도를 저하시키는 것으로 나타났다. 따라서 수분무 소화설비는 화재발생시 대피자가 대피한 후에 이루어져야 할 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.1002-1009
• /
• 2004

Direct contact air conditioning systems, in which heat and mass are transferred directly between air and water droplets, have many advantages over conventional indirect contact systems. The purpose of this research is to investigate the cooling and heating performances of direct contact air conditioning system for various inlet parameters such as air velocity, air temperature, water flow rate and water temperature. The experimental apparatus comprises a wind tunnel, water spray system, scrubber, demister, heater, refrigerator, flow and temperature controller, and data acquisition system. The inlet and outlet conditions of air and water are measured when the air contacts directly with water droplets as a counter flow in the spray section of the wind tunnel, and the heat and mass transfer rates between air and water are calculated. The droplet size of the water sprays is also measured using a Malvern Particle Analyzer. In the cooling conditions, the outlet air temperature and humidity ratio decrease as the water flow rate increases and as the water temperature, air velocity and temperature decrease. On the contrary, the outlet air temperature and humidity ratio increase in the heating conditions as the water flow rate and temperature increase and as the air velocity decreases.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 춘계학술발표대회 및 제14회 신소재 심포지엄
• /
• pp.9.2-9.2
• /
• 2008

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.230-233
• /
• 2008

본 연구는 수분무 소화설비의 효용성에 대한 기초평가를 수행할 목적으로 FDS 수치시뮬레이션을 수행하였다. 화재강도 및 풍속의 변화에 따른 화재시 온도 및 연기농도에 대한 안전성 확보 효과를 분석하였다. 터널내 풍속이 없는 경우 수분무는 냉각효과에 의한 온도 및 연기농도 감소효과가 아주 우수하여 대피자의 안전성 확보에 효과적이었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.200-203
• /
• 2008

Water mist fire suppression system utilizes the fire suppression features such as cooling of fire source, dilution of ambient oxygen, and shielding of radiation heat with the evaporation of microscopic water droplets. The momentum of water mist is relatively low and the infiltration of water mist to the fire source is not effective. In addition to lower penetration force, the evaporated water vapor is liable to decline to limited portion of fire source due to its light weight and sparse density. On the other hand, the cycling water mist system is expected to improve the penetration force of water mist as well as the dilution coverage capability with the stratified spray characteristics. At this paper we present the analyzed fire suppression capability of intermittent water spray pattern by use of FDS which is computational fire dynamics fire model. We expect this analysis shall be supportive to the development of the prototype of water mist nozzle.

• 설비공학논문집
• /
• 제15권7호
• /
• pp.572-578
• /
• 2003

The present study was numerically and experimentally performed to investigate the fire suppression performance of water mist spray subjected to thermal radiation in closed space. Downward-directed water mist sprays to interact with an under kerosine pool fire were investigated in test facility The mass mean diameters of water mist droplet were measured by PMAS under various flow conditions. The developed water mist spray nozzle was satisfied to the criteria of NFPA 750, Class 1. The mechanism of the fire suppression by water mist was attributed to the cooling of the fire surface which lead to suppressed of fuel evaporation. It was proved that the water mist spray system under lower pressures could be applied to underground fire protection system.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.90-97
• /
• 2012

It is investigated of the DME spray characteristics about varied ambient pressure and fuel injection pressure using the common rail fuel injection system when the nozzle holes diameter is varied. The common rail fuel injection system and fuel cooling system is used since DME has compressibility and vaporization in atmospheric temperature. The fuel injection quantity and spray characteristics were measured. The spray was analyzed of spray shape, penetration length, and spray angle at the six nozzle holes. The 2 types injector were used, the one was 0.166 mm diameter the other one was 0.250 mm diameter. The ambient pressure which is based on gage pressure was 0 MPa, 2.5 MPa, and 5 MPa. The fuel injection pressure was varied by 5 MPa from 35 MPa to 70 MPa. When using the converted injector, compared to using the common injector, the DME injection quantity was increased 127 % but it didn't have the same heat release. Both of the common and converted injector had symmetric spray shapes. In case of converted injector, there were asymmetrical spray shapes until 1.2 ms, but after 1.2 ms the spray shape was symmetrical. Compared with the common and converted injector, the converted injector had shorter penetration length and wider spray angle than the common injector.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.793-797
• /
• 2000

The environmental problems by using coolant demanded the new cooling methods. As one of them the studies on the dry grinding with compressed cold air have been done. The cooling method using compressed cold air was effdve thmugh going down the temperature of compressed air supplied below $-25^{\circ}C$ and inneasing the amount of mmpresd cold air, but had not enough cooling effect due to the low performance of lubrication. Therefore, the cooling methods using MQL(Minimum Quantity Lubrication) or mist newly were suggested. These two methods can satisfy both cooling effect and lubrication with only small amount of coolant, also has the benefit in the point of decreasing the envimnmental pollution. This paper focused on analyzing the grindmg characteristics of the cooling method using mid. The generated heat and grinding force of the cooling method using mist were compared with them of coolant and compressed cold air. And them grinding test according to the temperature of compressed cold air, mist spray amount and mist supply direction were done.