• Journal of Pharmaceutical Investigation
• /
• v.38 no.2
• /
• pp.119-126
• /
• 2008

Solid dispersions of poorly water-soluble drug, sibutramine, were prepared with hydrophilic polymer, poly-N-vinylpyrrolidone (PVP), hydroxypropylmethylcellulose (HPMC) and organic acid, citric acid, to improve the solubility of drug. Physicochemical variation and shape of microsphere were characterized by scanning electron microscopy (SEM), differential scanning calorimeter (DSC) and Fourier-transform infrared spectroscopy (FT-IR). Microspheres containing additives showed more spherical shape than non additive microspheres. In vitro release behavior of microspheres presented at simulated gastric fluid (pH 1.2) and simulated intestinal fluid (pH 6.8). The solid dispersion form transformed the drug into an amorphous state and dramatically improved its dissolution rate. These data suggest that the solid dispersion technique is an effective approach for developing the appetite depressant drug products and various pharmaceutical excipients are able to control the release behaviors.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.680-690
• /
• 2002

Implantable biodegradable wafers were prepared with pamidronate -loaded poly (L-lactide-co-glycolide) (PLGA, 75 : 25 mole ratio by lactide to glycolide, molecular weight : 20000 and 90000 g/mole) by direct compression method for the sustained release of pamidronate to investigate the possibility for the treatment of bone resorption. Pamidronate-loaded PLGA powders were prepared by means of physical mixing and spray drying with the control of formulation factors and characterized by scanning electron microscope and X-ray diffractometer. The pamidronate-loaded PLGA powders fabricated into wafers by direct compression under the constant pressure and time at room temperature. These wafers were also observed for their structural characteristic, release pattern, and degradation pattern. The release rate of pamidronate increased with increasing their initial loading ratio as well as increasing wafer thickness. The molecular weight of PLGA affects the release pattern : the higher molecular weight of PLGA, the faster release rate. It can be explained that the higher viscosity of high molecular PLGA solution at same concentration tends to aggregate PLGA and pamidronate resulting in unstable pharmaceutical dosage form. This system had advantages in terms of simplicity in design and obviousness of drug release rate and nay be useful as an implantable dosage form for the treatment of aural cholesteatoma.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.573-579
• /
• 2013

This study was conducted to investigate optimal harvesting stage and the effects on cut roses of Korean cultivar harvested at different stages. Cut roses are harvested at three different flowering stages. The optimal harvesting stage of cut roses was different depending on varieties. The vase life of standard type 'Pink Song' and spray type 'Peace One' was extended when they were harvested in one and three stages, respectively. The vase life was generally increased when the cut roses were pretreated with a solution containing 2% sucrose + $200mg{\cdot}L^{-1}$ aluminum sulfate + $200mg{\cdot}L^{-1}$ $Mg(NO_3)_2$ + $50mg{\cdot}L^{-1}$ $CaCl_2$ as compared to the control regardless of the harvesting stage. And this pretreatment solution improved the flower quality of cut roses bred in Korea. But the effects of pretreatment were varied depending on the harvesting stage.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.439-449
• /
• 1997

Studies have been carried out to determine the effect of sprinklers on fires typical of a number of occupancies including simulated of office furniture, supermarkets, carpet displays, libraries, video stores and liquor stores. After surveys of actual fire loads, the experiments were conducted in a specially designed sprinklered fire-calorimeter with a collecting hood 6 m x6 m leading to a vertical duct 1 m in diameter. Details of the rig are given elsewhere [1]. Only well ventilated fires were studied. Rate of heat release and production of various toxic chemicals were monitored during the tests. Both sprinklered and unsprinklered fires were used. The results were used to establish the unsprinklered burning behaviour and the fire-control effects of sprinklers. Before sprinkler operation, the rate of fire growth could be modelled as 12_fires as given in NFPA 92B (1991 Edition) [2]. It was found that operation of sprirnklers controlled but did not extinguish the fires. This was expected as parts of the fire load were shielded from the spray. Also there were significant increases in the concentration of carbon monoxide when the sprinklers operated. Sprinklers had little effect on the concentrations of other toxic products measured. The results from the tests were extrapolated to large single storey buildings for the same occupancy classes and the results used to compare the required and the available escape times for different occupancies, particularly whether the use of sprinklers would improve the chances of escape from those premises. It was found that in most of the cases studied, adequate escape times will be available without any special measures. For very rapid fire growths, however, special measures, such as availability of trained staff may be needed. Standard response sprinklers will have little impact.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.392-395
• /
• 2006

The toxic effects of 9 commercially available herbicides on the earthworm, Eisenia fetida (Savigny) were evaluated with recommended dose, 2-fold and 4-fold dose using soil surface spray, immersion and contact filter tests in order to find out whether herbicides actually influence the life of earthworm in the soil or not. In the surface sprayed soil test, the earthworm mortality to nine herbicides were not significantly different from the comparison with the control regardless of level of dose. In the immersion test, the mortality of 4-fold dose was 34% in the napropamide and 64% in the alachlor. In contact filter test, the mortality appeared 80% in alachlor, 37% in napropamide, and 10% in triclopyr at 2-fold dose level and those of 4-fold dose were as follows: napropamide 96%, alachlor 80%, glyphosate 47%, triclopyr 37%, paraquatdichloride 37%; glufosinate ammonium 33%, pyributicarb 10%. As a result of these tests by three methods, the mortality of earthworm in terms of the recommended dose level was no observation about eight herbicides while the napropamide appeared 33% in contact filter test.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.19-26
• /
• 2021

In fine-particle injection processing, hard fine particles, such as silicon carbide or aluminum oxide, are injected - using high-pressure air, and a small amount of material is removed by applying an impact to the workpiece by spraying at high speeds. In this study, a two-axis stage device capable of sequence control was developed to spray various shapes, such as circles and squares, on the surface during the micro-particle jetting process to understand the surface-shape micro-particle-processing characteristics. In the experimental device, two stepper motors were used for the linear movement of the two degree-of-freedom mechanism. The signal output from the microcontroller is - converted into a signal with a current sufficient to drive the stepper motor. The stepper motor rotates precisely in synchronization with the pulse-signal input from the outside, eliminating the need for a separate rotation-angle sensor. The major factors of the processing conditions are fine particles (silicon carbide, aluminum oxide), injection pressure, nozzle diameter, feed rate, and number of injection cycles. They were identified using the ANOVA technique on the design of the experimental method. Based on this, the surface roughness of the spraying surface, surface depth of the spraying surface, and radius of the corner of the spraying surface were measured, and depending on the characteristics, the required spraying conditions were studied.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.103-107
• /
• 2018

Pregnancy rhinitis is a relatively common condition. It is characterized by the presence of nasal symptoms, especially nasal congestion, not present prior to pregnancy, but typically present during the last 6 or more weeks of pregnancy, without other signs of respiratory tract infection or any known allergic causes, and disappearing completely within 2 weeks after delivery. Nasal saline irrigation, intranasal steroid spray, and oral antihistamines are usually recommended as the first line of treatment for rhinitis. However, most pregnant women refuse medical treatment for pregnancy rhinitis because of the fear of teratogenicity. Severe pregnancy rhinitis increases the risk of snoring, which has been suggested as having adverse effects on the fetus. In cases where the patients are unable to control their symptoms, pregnancy rhinitis can negatively affect the quality of life (QOL) as well as the pregnancy outcome. Therefore, special caution is required for determining the appropriate diagnosis and treatment modalities for pregnancy rhinitis. Here, we report for the first time, the successful treatment of pregnancy rhinitis that was unresponsive to conservative management and medical therapy by using microdebrider-assisted inferior turbinoplasty at the final stages of pregnancy, along with a review of the relevant literature.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1071-1081
• /
• 2020

Essential oils (EOs) have been shown to be plant-extracted antimicrobial agents. However, there are limited studies investigating the efficacy of EOs against pathogens. Among them, tea tree oil (TTO) is extracted from Melaleuca alternifolia, which is also used as an antifungal agent. In this study, the effect of TTO was investigated on the suppression of melon powdery mildew caused by Podosphaera xanthii and tomato leaf mold disease caused by Passalora fulva. Both powdery mildew and leaf mold diseases were significantly suppressed by a spray of TTO. Eighty percent of powdery mildew and 81% of leaf mold disease of the control value were suppressed by 0.5% TTO liquid, when sprayed 3 times every 7 days on the melon and tomato leaves. Inhibition of mycelial growth was also greatly affected by different concentrations of TTO against four different fungal pathogens. Ninety-eight percent of Pseudocercospora fuligena, 97% of P. fulva, 95% of Botrytis cinerea, and 94% of Phytophthora infestans mycelial growth were inhibited by 0.2% to 1.0% of TTO contained in plate media, respectively. However, phytotoxicity in plants by the TTO treatments was revealed when melon and tomato leaves were sprayed with a 1% and 2% concentration of TTO, respectively. Therefore, our findings show that TTO has high antifungal effects against various plant pathogens that occur during crop cultivation. We also suggest that when applying TTO to plant leaves, it is necessary to establish an accurate treatment concentration for different crops.

• Journal of ILASS-Korea
• /
• v.25 no.4
• /
• pp.196-203
• /
• 2020

Nowadays, urea SCR technology is considered as the most effective NOx reduction technology of diesel engine. However, low NOx conversion efficiency under low temperature conditions is one of its problems to be solved. This is because injection of UWS (Urea Water Solution) is impossible under such a low temperature condition due to the problem of insufficient of urea decomposition and urea deposits. In several previous studies, it has been reported that appropriate control of the amount of ammonia adsorbed on SCR catalyst can improve the NOx conversion efficiency under low temperature conditions. In this study, we tried to find out how much the NOx conversion efficiency increases with respect to the amount of ammonia adsorbed on the catalyst, and what the temperature conditions that the ammonia slip occurs. This study shows the results of 8 times repeated WHTC test with a diesel engine, in which UWS was injected with NH3/NOx mole ratio of '1'. Through this study, it was found that 13% of the NOx conversion efficiency of WHTC increased while the θ (ammonia adsorption rate) increased from "0%" to "22%". In addition, it is found that in cases of high θ value, the significant improvement of NOx conversion efficiency at low temperatures presented during the beginning period of WHTC and at high temperature and transient conditions presented during last part of WHTC test. The NH3 slip occurring condition was 250℃ of catalyst temperature and 10% of θ, and the amount of NH3 slip increased as the temperature and θ are increased.

• English & American cultural studies
• /
• v.14 no.1
• /
• pp.27-51
• /
• 2014

Doris Lessing describes a band of revolutionaries who become involved in terrorist activities far beyond their level of competence in The Good Terrorist. Alice Mellings who is from a middle-class family has organized a squat house in London and seems capable of controlling everyone around her and anything about the house. She is seemingly like a housekeeper or a breadwinner. She also likes to be on the battlefront, for instance, demonstrating, picketing and spray-painting slogans. Such is able to easily exploit the others and she increasingly becomes the leader in the house. Recently some critics have focused on the political and social roles of the protagonist who represents a voice of terrorists in the 1980s England. Based on this, The Good Terrorist is read with the concept of the subject of feminism that Gillian Rose adopts in order to show that this subject tries to avoid the exclusion of the master subject. This subject imagines spaces which are not structured through masculinist claims to exhaustiveness. Alice as the subject of feminism shows different roles; she extorts or steals money for the maintenance of the house from her affluent parents; she spends all her time cleaning, fixing, decorating the deserted house; and she looks after the official affairs related to the house with her skills and experiences. She is systematically in charge of the house and sits at the head of the table in the kitchen. But when their activities turn into disaster and their plans fail, Alice willingly decides to close down the house after ousting the members. Here in her extorted gaze it is revealed that she takes control over the working class members of the house who are unable to lead a revolution because of their own problems and thereby the working class are dominated by the middle class. That is, the place is paradoxically recreated based on class differences, which the revolutionaries try to break. By representing the deconstruction and recreation of the place through squat houses, Lessing reveals her implicit feminism in which a new place should be produced crossing the principle of the dichotomy of gender and class.