• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.238-245
• /
• 2007

This survey was performed to elucidate whether pesticide can cause the non-spinning syndrome of silkworm, Bombyx mori in Yecheon and Sangju 2002. We primarily focused to Insect Growth Regulator Pesticides(IGR) used in that areas. In the result of the survey to the retail pesticide store at Yecheon and Sangju, seven pesticides of the total 12 IGR pesticides sold were used during spring sericuitural season. 7 pesticides might effect on silkworm in consideration of possibility of exposure according to the characteristics of used amount, spray drift, volatility and treatment time. Five chitin synthesis inhibitor involving diflubenzuron of 7 IGR pesticides were known as very toxic to silkwork after exposure by skin and feeding but no non-spinning syndrome was observed from several papers. Methoxyfenozide and tebufenozide also has used at sericultural season, but are ecdysone agonist. One of the most feasible suspect of non IGR pesticide, was molinate in consideration of its volatility property and wide spread use in the sericultural area. But it's symptom after exposure of molinate was not the same as the non-spinning syndrome broke out at the sericultural farm in Yecheon and Sangju.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2009

We sought to improve the methods for washing fresh raw ginseng. The quality of ginseng surface-washed by different methods was evaluated during storage at 10C and $20^{\circ}C$. The raw ginseng surface-washing method was a full-cone spray-type procedure using water and air. The water for decontamination had an electrolysis value of 80 ppm, also known as electrolysis water $2^{\circ}C$ water and water containing 5 ppm chlorine dioxide, were also used for decontamination. The Hunter color (${\Delta}E$) of ginseng washed with water withan electrolysis value of 80 ppm, or water with 5 ppm chlorine dioxide, was greater than that seen after other washing methods were used. The weight loss after washing with 5 ppm chlorine dioxide water was similar to that seen after washing with $2^{\circ}C$ water or 80 ppm electrolysis water. Reductions in total microorganism levels, and counts of yeasts and molds, assayed 10 days after washing with 5 ppm chlorine dioxide water were greater than seen after use of other sterilization methods. Quality maintenance on storage, at both 10C and 20C, after washing with 80 ppm electrolysis water, was better than that noted after other sterilization methods. The moisture content of washed ginseng was similar under all storage conditions tested.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.329-336
• /
• 2014

As an abiotic stress, chilling stress is one of the major factors limiting plant growth and increasing susceptibility to pathogens. Therefore, enhancing stress tolerance in plants is an important strategy for their survival under unfavorable environmental conditions. The objective of this study was to determine the effects of the exogenous application of salicylic acid (SA) or nitric oxide (NO) on chilling tolerance in pepper seedlings. Pepper (Capsicum annuum L. 'kidaemanbal') seedlings were grown under normal growing conditions ($20/25^{\circ}C$, 15 hours photoperiod, $145{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, fluorescence lamps) for 23 days after transplanting. The solution (3 mL) of 1 mM SA and 0.3 mM NO with surfactant triton 0.1% were sprayed two times a week, respectively. Right after the completion of chemical application, seedlings were subjected to chilling condition at $4^{\circ}C$ for 6 hours under dark condition and then the seedlings were recovered at the normal growing conditions for 2 days. In order to assess plant tolerance against chilling stress, growth characteristics, chlorophyll fluorescence (Fv/Fm), and membrane permeability were determined after chilling stress imposition. Total phenolic concentration and antioxidant capacity were measured during the whole experimental period. Disease incidence for pepper bacterial spot and wilt was also analyzed. Pepper seedlings treated with SA or NO were maintained similar dry mass ratio, while the value in control increased caused by chilling stress suggesting relatively more water loss in control plants. Electrolyte leakage of pepper seedlings treated with SA or NO was lower than that of control 2 days after chilling treatment. Fv/Fm rapidly decreased after chilling stress in control while the value of SA or NO was maintained about 0.8. SA increased higher total phenolic concentration and antioxidant capacity than NO and control during chemical treatment. In addition, increase in total phenolic concentration was observed after chilling stress in control and NO treatment. SA had an effect on the reduction of bacterial wilt in pepper seedlings. The results from this study revealed that pre-treatment with SA or NO using foliar spray was effective in chilling tolerance and the reduction of disease incidence in pepper seedlings.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.279-287
• /
• 2017

BACKGROUND: Many farmers who cultivate the strawberries for export have used agricultural chemicals which MRL (Maximum Residue Limits) of main export target countries or simultaneous multi-residue analysis in Korea have not been established. Among them, the cyenopyrafen and cyflumetofen were selected and applied to this study to determine the PHI (pre-harvest interval) which is appropriate to the PLS (Positive List System) criterion (0.01 mg/kg) and to investigate the residual amounts in the samples. In addition, Fifty pesticides were monitored to check up whether it is suitable or not for main export target countries. METHODS AND RESULTS: Cyenopyrafen and cyflumetofen were spayed out to the strawberries. Samples for residual analyses were taken for maximum 60 days. After sampling, they were extracted by the QuEChERS method and analyzed using the LC-MS/MS. Cyenopyrafen and cyflumetofen were detected in a range of 0.0106~2.6517 mg/kg and of 0.0005~1.4480 mg/kg, respectively. From this results, they were found to be suitable for PLS concentration after 30 or 45 days after spray. In addition, they were detected in most samples that were selected at random. Their concentrations were higher than the PLS criterion in the maximum twenty samples. Twelve of pesticides unsuitable for main export target countries have been detected in the monitoring of simultaneous multi-residue analysis. The result indicates they are unsuitable for export since they excesses over PLS criterion. CONCLUSION: The monitoring result showed it is necessary to establish the pesticide standards of safe use suitable for the PLS criterion. In addition, it is considered continues management and inspection are needed to solve problems caused by unsuitable pesticides in export strawberries.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.95-103
• /
• 2019

Temperature and relative humidity are important factors in crop cultivation and should be properly controlled for improving crop yield and quality. In order to control the environment accurately, we need to predict how the environment will change in the future. The objective of this study was to predict air temperature and relative humidity at a future time by using a multilayer perceptron (MLP). The data required to train MLP was collected every 10 min from Oct. 1, 2016 to Feb. 28, 2018 in an eight-span greenhouse ($1,032m^2$) cultivating mango (Mangifera indica cv. Irwin). The inputs for the MLP were greenhouse inside and outside environment data, and set-up and operating values of environment control devices. By using these data, the MLP was trained to predict the air temperature and relative humidity at a future time of 10 to 120 min. Considering typical four seasons in Korea, three-day data of the each season were compared as test data. The MLP was optimized with four hidden layers and 128 nodes for air temperature ($R^2=0.988$) and with four hidden layers and 64 nodes for relative humidity ($R^2=0.990$). Due to the characteristics of MLP, the accuracy decreased as the prediction time became longer. However, air temperature and relative humidity were properly predicted regardless of the environmental changes varied from season to season. For specific data such as spray irrigation, however, the numbers of trained data were too small, resulting in poor predictive accuracy. In this study, air temperature and relative humidity were appropriately predicted through optimization of MLP, but were limited to the experimental greenhouse. Therefore, it is necessary to collect more data from greenhouses at various places and modify the structure of neural network for generalization.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.481-487
• /
• 2021

The purpose of this study was to provide safety management information by analyzing the survival and growth-related properties of foodborne pathogens from Romaine lettuce. After cultivating E. coli O157:H7 for 72 h on Romain lettuce via spray inoculation, the bacteria population increased by 2.0 log CFU/g from the initial population, confirming the possibility of survival and multiplication of the pathogen thereon. The study also revealed that there is no significant difference in the cultivation of E.coli O157:H7 after 72 h from inoculation on damaged and undamaged lettuce leaves. As a result of investigating distribution of E.coli O157:H7 on damaged lettuce leaves, it was found that the bacteria is unlikely to adhere on the smooth surface of undamaged leaves and, thus, results in a low population density, whereas the bacteria cluster on the rough surface of damaged leaves and easily enter through the damaged tissues. Furthermore, after 24 h of cultivation of the pathogenic microbe in the extract with concentrations of 10-100%, utilization of the lettuce extract by the pathogen was found to be 8.9 log CFU/mL E. coli O157:H7, 8.6 log CFU/mL L. monocytogenes, and 8.8 log CFU/mL P. carotovorum. The increase in the population of both the pathogenic microbe and foodborne pathogen reached over 4 log CFU/mL, implying the microbe can utilize the lettuce extract as a source of nutrition. Compared to the initial inoculation concentration in 0.1% lettuce extract, the final concentration has increased up to 2.7 log CFU/mL E. coli O157:H7, 1.3 log CFU/mL L. monocytogenes, and 2.9 log CFU/mL P. carotovorum. Accordingly, the study confirms that the minimal growth concentration of the pathogenic microbe is lower than 0.1% and that the pathogen possibly survive and multiply inside the lettuce leaves given the lettuce extract with concentration of 0.1% is consistently supplied through the damaged tissues.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.100-111
• /
• 1983

The research results reported herein had the objectives to understand and analyze the present problems of saemaeul woodland joint cattle grazing system in Kang Won Do and to take steps of improvement. The study results on actual management conditions, problems analyzed and improvement plan of total 208 joint cattle grazing area which was established 105 area in 1981 and 103 area in 1982 were summarized as follows: 1. the effectiveness of joint cattle grazing projects 1) Average daily weight gain of cattle during joint cattle grazing period was 0.4kg, showing higher daily than the conventional feeding of 0.33kg. 2) Increase of total farm income over the conventional feeding system were \1,031,357,320 during the grazing period from May to October in 1982 by adapting the 208 joint cattle grazing system, of which effectiveness of weight gain was \293,075,300 and labor saving was \543,838,750. 3) According to the results of questionaire investigation from 208 joint cattle grazing area, effectiveness of joint cattle grazing system over the conventional system were (1) labor saving, (2) feed cost saving, (3) reduced diseases, (4) increase of number of feeding, (5) inspiration of joint endeavor, (6) effect of more gain, (7) easiness of feeding and feed cost savings. 2. Problems of joint cattle grazing system. 1) Shortages of grass were a problem at second year of joint cattle grazing period due to the low regrowth rate of wild grass. 2) Proper land for woodland joint cattle grazing is belonging to land of Government ownership and it is very hard to get the permission from office of forestry for cattle grazing purpose. 3) It is also difficult to find a proper time of breeding in grazing area by the difficulty of estrus detection. 4) There are a difficulty to give a proper vaccination and medical examination for the grazing cattle. 3. Improvement plans for woodland joint cattle grazing projects. 1) Obtain sufficient roughages by hoof cultivation and oversowing pasture from the second year of joint cattle grazing period. 2) In order to increase the beef production and to use for a calf production area, Government should arrange that all proper grazing land of Government owned in Kang Won Do convert into woodland joint cattle grazing area. 3) Make a good reproductive record by mixed grazing with a excellent breeding cow in a remote area. And carry out the collective artificial insemination with synchronous puberty induced by injection of puberty stimulation hormone. 4) Make a preventive injection for blackleg, twice medication of fasciola hepatica in a year, and spray and medication of tick insecticide. 4. A policy towards upbringing of woodland joint cattle grazing area. 1) Government should thoroughly investigate about a proper land for woodland joint cattle grazing from all forests. 2) When the area is suitable for the woodland joint cattle grazing, though it is national forest or restricted area, government should make it possible to establish a grazing area. 3) On the proper land foe joint cattle grazing in the remote place, Government should support for the road construction and electric fence equipments by using of national funds. 4) There should be an administrative consideration for well promotion of the project that make woodland joint cattle grazing suitable to the characteristics of Kang Won Do. 5) In order to improve the reproduction record, Government should reform the insufficiency of artificial insemination in the joint cattle grazing area. 6) In order to maintain a proper price of cow, Government should carry out the price plan. 7) When there is any request for grassland formation in the woodland joint cattle grazing area, Government should permit it with preference.