• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.114-121
• /
• 2000

Since resistance spot welding has become one of the most popular sheet metal fabrication processes, a strong emphasis is being put on the quality of the welds. Throughout the years many quality estimation systems have been developed by many researchers to ensure weld quality. In this study, the process variables, which were monitored in the primary circuit of the welding machine, are used to estimate the weld quality with Hopfield neural network. The primary dynamic resistance is vectorized and stored as five patterns in the network. As the welding is done, the dynamic resistance patterns are recognized and the quality is estimated with the proposed method. Due to the primary process variables, it is possible to utilize this algorithms as an in-process real time quality monitoring system.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.44-48
• /
• 2009

In automotive company, a lot of researchers have investigated for the spatterless welding process during last two decades. A spatter influences on the product quality such as strength and surface states. In this paper, a hollow tip is proposed for spatterless process. An optimal size of electrode hole is obtained from a weldability evaluation of each hole diameter. Through the cross section analysis, a phenomenon that molten metal moves in the hole which located between two workpiece is observed, and this makes spatterless welding process even though current is higher. Finally, widely acceptable weld area in lobe curve is obtained by using hollow tip as compare with conventional no hollow tip. In this paper, spatterless resistance spot welding with improvement weldability and productivity is proposed by using hollow tip.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.126-128
• /
• 2003

Force is one of the most important variables with welding current and welding time in resistance spot welding. But a good farce control method hasn't been come out on servogun resistance spot welding system. In this study, we prove the feedback current of the servo-motor can be used to an excellent force measuring sensor and the force can be also controlled by the feedback current.

• 한국디지털건축인테리어학회논문집
• /
• 제8권1호
• /
• pp.57-64
• /
• 2008

There are many problems in present truss-deck slab system for example welding defect, segregation, water leakage, rust and tarnish etc. These problems may be caused by spot welding thin galvanized steel plate and lattice bar. The TOX Joining Systems is to join metal sheets of different material and thickness with and without coating or painting without adding heat or a joining part. Newly developed TOX-deck slab system using non-welding joint is free from above mentioned problems. The objects of this study are suggestion of design strength of TOX joint by experimental and statistical analyses and development of window based program to design the TOX-deck slab system.

• 전자공학회논문지S
• /
• 제35S권7호
• /
• pp.103-108
• /
• 1998

In this paper, we atempt to control the nonlinear power system for resistance spot welders to be a fully linearizesd system by applying the recently developed nonlinear feedback linearization techniques. the controller proposed in this paper is computationally simple. In addition, the easy gain tuning as well as the high dynamic performance of resistance spot welding systems can be obained simulaneously. To illustrate the dynamic performance of our controller further, we present some simulation results.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.24-30
• /
• 1997

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 추계학술발표 개요집
• /
• pp.61-67
• /
• 1995

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.397-406
• /
• 2003

저항 스폿 용접은 자동 용접라인 등에서 널리 사용된다. 최근에는, 대량으로 생산하는 산업현장에서 좀 더 정교한 품질 제어가 필요하게 되었고 마이크로프로세서를 채용한 제어의 다양한 적용으로 높은 생산성과 더 나은 용접품질을 얻을 수 있게 되었다. 본 연구에서는 인버터 타입 파우어 소스와 용접 서보건을 개발하였다. 그 결과, 기존의 공압건에 비해 몇 가지 장점을 갖게 되었는데 그 중의 하나는 용접공정 중에 정밀한 가압력 제어가 가능하게 되었다. 또한, 작업시간도 줄고 경비도 절감되는 부가 효과를 얻을 수 있다고 판단된다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.273-279
• /
• 2017

Purpose: Recently, Issues on security for vehicles are getting increased all around the world. Especially, hood panel needs to be thinner for the protection of pedestrians. But thinner panel makes durability get worse. So, it is needed to satisfy both of them. Methods: Durability effectiveness will be studied because properties and assembly allowance of over-slam bumper mostly affects durability of hood panel. Overlap of over-slam bumper can be made in production line and it can affect durability of spot welding in hood inner panel. Daguchi method is used to catch the condition in which load gets smaller and location, hardness and quantity of overlap are selected to be factors. Durability effectiveness is analyzed with the factors. Result: the mechanism that affects on spot welding is identified. The test was conducted in both open/close and driving condition and the relation between both conditions is analyzed. Conclusion: The test contributed to durability of hood panel with optimization of over-slam bumper.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.