• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.160-167
• /
• 2006

In this project, we studied more accurate and reliable sensing method for oxygen in reheating furnace, made the empirical model for NOx concentration based on oxygen and evaluate the stability of the Tuneable Diode Laser (Absorption) Spectroscopy(TDL(A)S). The tested oxygen monitoring system is installed at work-field reheating furnace on hot roll at POSCO and compared with the Zr sensor system which shows too sensitive because it measures oxygen concentration on a spot unlike TDLS sensor which is successfully applied at 13m-width reheating furnace to measures the line average along the Optical Path Line(OPL).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2129-2134
• /
• 2011

This research increases efficiency of track-maintenance repair and cuts maintenance cost with relocating Continuous Welded Rail how to set up install criteria by comprehension analysis through an on-the-spot survey and track measurement about installing place at expansion joint of Continuous Welded Rail. This scope of this research is 427 places installed at Line No.1~4, Seoulmetro. We take a field study and select two spots. So we survey wheel-load, cross-load and railbed cross-resistance and suggest install criteria of expansion joint of Continuous Welded Rail through investigation and analysis of track facilities about neighboring section of expansion joint.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.235-237
• /
• 2007

본 연구는 현장 분진포집에 의한 도전율측정과 전기설비 위험을 평가한 것이다. 현장에서의 분진발생은 전기설비에 악영향을 주어 전기설비의 운영시 발생되는 것과 주변환경적 요인에 의해 발생되는 분진이 주를 이루고 있다. 현장에서 포집된 분진으로부터 분진의 종류, 도전율 특성에 의해 전기설비가 영향을 미칠 것으로 판단되었다. 또한 일부 부식성 가스에 의해 노출된 전기설비의 위험성을 분석하고 관리기준을 마련할 필요가 있는 것으로 나타났다. 분진의 종류에 따라 사고의 과정은 빠르거나 오랫동안 지속되었다가 발생되는 근원적 원인을 규명하고자 국내현장에서 분포되고 있는 분진의 종류와 특성 분석과 관련규정을 검토하고 현장실태에서 나타난 문제점을 검토하여 분진발생지역에서의 전기설비 안전관리를 위한 기준마련에 이용될 것으로 기대된다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.48-53
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar laserm, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment wpecimen was loaded in parallel with a loadcell. The specimen was the cold rolled sdteel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.21-30
• /
• 1991

In this paper, we study effect of waveness at the optical surface roughness measurement. In generally, waveness components cause errors in calculation of the roughness value of metal surface. We study about surface roughness signals In the frequency domain for separate two signal component of real roughness and waveness by digital signal processing methods. Thereafter, determine low and high Component of frequency spectrum. By this separating frequency value we design liner low and high pass filter which cutoff frequency is 1 Hz. After this process, converted each filtered spectrum by inverse discrete fourier transformation to time domain waveness and real roughness signals We calculate surface roughness value from filtered roughness signals. For evaluate this method, we use five specimens roughness signal which obtained from optical surface roughness measuring system in 3mm/s moving speed with 0.1 mm laser beam spot size As a result, we obtain more linerized roughness value than that of unfiltered roughness signals.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.161-165
• /
• 1997

Recently, industrial accidents have been getting great damage to an enterprise management directly and indirectly, the industrial injuries of conventional type are decreasing : on the other hand, musculoskeletal injuries are trending to a rapid increase. This shows that most of carrying works have been performing in almost all production process and convey objects, machine equipment and work method. Then, they are made by unfitted design which doesn't consider physical condition of workers, so it causes them to bring about forceful motion. In this paper, it was used NIOSH standard the data of spot. The ergonomic design of machine equipment and the evaluation of biomechanical compression force at theL_5/S_1$and back power, intend to provide the basis which can be applied, compared, and analyzed between before process improvement and after.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.586-588
• /
• 2005

P2P (Peer-to-peer) 파일 공유 시스템에서 컨텐츠의 복제는 Hot Spot의 방지와 가용성의 보장, 검색 속도의 향상을 위해 사용되고 있다. 컨텐츠의 복제본의 수(공간 효율성)와 검색 성능은 일종의 trade-off로써 이 논문에서는 가능한 검색 성능을 향상시키면서 적절한 양의 복제본의 수를 유지하는 방법인 SRoD 알고리즘을 제안한다. SRoD는 DHT 기반 파일공유시스템에서 전반적으로 간단하게 접목하여 사용할 수 있다는 장점을 가지고 있다. 이러한 특징은 P2P가 추구하는 자율성과 평등성을 보장하기 위한 것이다. 본 논문에서는 SRoD 알고리즘을 설명하고 이것의 장점과 보완해야 할 점에 대해 논하게 될 것이다.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.35-40
• /
• 2004

In this study, we collected data used to formulate the relationship between quantitative metrological parameters in CRT display and the perceived focus quality. Human perception of the focusing quality was evaluated in terms of user feedback scores regarding the character legibility from four highly trained inspectors. Thirteen CRT monitors from five different manufacturers were compared relatively with respect to the norm monitor. The profile of electron beam such as spot size and the shape of distribution made by electron beam, contrast, convergence of RGB beams, and luminance characteristics were measured using a precision measurement system. Linear regression analysis and artificial neural network models were used to formulate the relationship between human perception and the quantitative measurements. The accuracy of the formulated linear regression model ($R^2$=0.515) was not satisfactory but the nonlinear neural network model ($R^2$=0.716) was fairly convincing and robust even the utilized data included subjective differences.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.386-389
• /
• 1999

Effect of high voltage screening was examined on mechanical strength of titania ceramics with two different surface roughness. Roughly finished sample showed degraded mechanical strength meaning that the introduced flaw played the role of starting point of mechanical fracture. On such sample, electrically weak parts were eliminated by applying a screening field. Mechanical strength measurement on survived parts revealed that after screening the Weibull plots bended to become a convex curve while plots at high strength region were almost the same. This result means that relatively low mechanical strength parts were eliminated by the electrical method. As a result the Weibull modulus calculated from all the data increased, demonstrating the effect of high voltage screening on titania ceramics containing fracture controlling surface flaws. Roles of the surface flaw such as a common weak spot for both failures are disscussed in relation to the electric field concentration similar to that of mechanical stress.