• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.359-366
• /
• 2022

In this paper, the effect of compression levels on the strengths of porous concrete using bottom ash aggregates was analyzed. Coal bottom ash (CBA) was used as aggregate in porous concrete in this study. The aggregate size types used in the CBA concrete mixtures were catagorized into two different ones. One included only a single aggregate particle size and the other included hybrid aggregate particles mixed at a ratio of 8:2 volume proportion. The water-binder ratio was fixed at 0.30, and the compression levels were applied at 0.5, 1.5, and 3.0 MPa valu es to fabricate a porou s concrete specimen. The total porosity, compressive, splitting tensile, and flexural tensile strengths were tested and analyzed. When the compression level increased, the total porosity decreased, meanwhile the compressive, split tensile, and flexural tensile strengths increased. The total porosity of concrete using hybrid aggregate was lower and the strength was larger than those of concrete using single-type aggregate. Finally, the correlation between the total porosity, compressive, split tensile, and flexural tensile strengths of porous concrete were presented. The total porosity and strength characteristics showed an inversely proportional correlation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.363-372
• /
• 2020

Dynamic compressive material properties at high strain rates is essential for improving the reliability of finite element analysis in dynamic environments, such as high-speed collisions and high-speed forming. In general, the dynamic compressive material properties for high strain rates can be obtained through SHPB equipment. In this study, SHPB equipment was used to acquire the dynamic compressive material properties to cope with the collision analysis of Woven tpye CFRP material, which is being recently applied to unmanned aerial vehicles. It is also used as a pulse shaper to secure a constant strain rate for materials with elastic-brittle properties and to improve the reliability of experimental data. In the case of CFRP material, since the anisotropic material has different mechanical properties for each direction, experiments were carried out by fabricating thickness and in-plane specimens. As a result of the SHPB test, in-plane specimens had difficulty in securing data reproducibility and reliability due to fracture of the specimens before reaching a constant strain rate region, whereas in the thickness specimens, the stress consistency of the specimens was excellent. The data reliability is high and a constant strain rate range can be obtained. Through finite element analysis using LS-dyna, it was confirmed that the data measured from the pressure rod were excessively predicted by the deformation of the specimen and the pressure rod.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.1861-1864
• /
• 2016

Although early diagnosis of thyroid nodule type is very important, the diagnostic accuracy of standard tests is a challenging issue. We here aimed to find an optimal combination of factors to improve diagnostic accuracy for distinguishing malignant from benign thyroid nodules before surgery. In a prospective study from 2008 to 2012, 345 patients referred for thyroidectomy were enrolled. The sample size was split into a training set and testing set as a ratio of 7:3. The former was used for estimation and variable selection and obtaining a linear combination of factors. We utilized smoothly clipped absolute deviation (SCAD) logistic regression to achieve the sparse optimal combination of factors. To evaluate the performance of the estimated model in the testing set, a receiver operating characteristic (ROC) curve was utilized. The mean age of the examined patients (66 male and 279 female) was $40.9{\pm}13.4years$ (range 15- 90 years). Some 54.8% of the patients (24.3% male and 75.7% female) had benign and 45.2% (14% male and 86% female) malignant thyroid nodules. In addition to maximum diameters of nodules and lobes, their volumes were considered as related factors for malignancy prediction (a total of 16 factors). However, the SCAD method estimated the coefficients of 8 factors to be zero and eliminated them from the model. Hence a sparse model which combined the effects of 8 factors to distinguish malignant from benign thyroid nodules was generated. An optimal cut off point of the ROC curve for our estimated model was obtained (p=0.44) and the area under the curve (AUC) was equal to 77% (95% CI: 68%-85%). Sensitivity, specificity, positive predictive value and negative predictive values for this model were 70%, 72%, 71% and 76%, respectively. An increase of 10 percent and a greater accuracy rate in early diagnosis of thyroid nodule type by statistical methods (SCAD and ANN methods) compared with the results of FNA testing revealed that the statistical modeling methods are helpful in disease diagnosis. In addition, the factor ranking offered by these methods is valuable in the clinical context.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.479-485
• /
• 2002

This study was conducted in order to elucidate the effects of nitrogen level and split application method, and shading treatment during reproductive stage on sink formation. Japonica variety Choocheongbyeo and Hwaseongbyeo and indica$\times$japonica cross type variety Nampoongbyeo were used. Five levels (6 to 30 kg/10a at 6 kg/10a interval) of nitrogen fertilization, and two split application methods (50-25-25% and 30-30-40% as basaltillering-panicle fertilizer) for each nitrogen treatment were applied. In addition shading treatments (shading rate, 65%) were performed for N 12 kg/10a and 24 kg/10a plot. Shading were applied for 30 days from panicle initiation to heading, 15 days from panicle initiation and 15days before heading. Panicle per square meter, and primary rachis branches per panicle and differentiated number of secondary branch per panicle increased according as applied nitrogen amount increased up to 18 to 24 kg/10a, and there was no significant difference between two nitrogen application methods. Primary rachis branch and secondary branch per square meter also increased according as the amount of applied nitrogen increase up to 18 to 24 kg/10a, and there was no significant difference between nitrogen application methods. Panicle per square meter and primary rachis branch per panicle were significantly decreased due to shading treatments only in Choochengbyeo. In all varieties, shading reduced secondary rachis branch per panicle significantly and the reduction was greatest in 30 days shading during reproductive stage. Spikelets per square meter increased according as the amount of applied nitrogen increases up to 18 to 24kg/10a, but showed no move increase above this nitrogen application level. Significant difference was not shown between nitrogen split methods. Spikelets per square meter also decreased significantly due to shading treatment during reproductive stage, showing the greatest reduction by 30 days shading during reproductive stage, and the least by 15 days shading during booting stage. The variation of spikelets per square meter was influenced greatest by the variation of panicles per square meter and spikelets per secondary rachis branch.

• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.387-394
• /
• 2007

To investigate the effects of deboning time and muscle type of ham on quality characteristics of cooked press ham, a total of twelve pigs(barrow, 100±5kg) were slaughtered and split in half. The left side ham of carcasses was deboned immediately after slaughter whereas the right side ham was deboned after chilling for 24 hours at 4℃. Each of two muscles(SM; Semimembranosus, BF; Biceps femoris) was used to make a press ham. The pH of hot-boning muscles was significantly(p＜0.05) higher than that of cold- boning muscles, and the pH of SM samples was significantly(p＜0.05) higher than BF samples. Hot-boning muscles showed significantly(p<0.05) longer sarcomere length compared with cold-boning muscles. There was no significant difference in myoglobin(Mb) percentage between SM and BF muscles, but SM samples of hot-boning showed significantly(p<0.05) lower L* value compared to hot-boning BF samples. The lightness(L*) of hot-boning muscles was significantly(p<0.05) lower than that of cold-boning muscles. These results suggested that the dark color of hot-boning samples might be due to not only the high muscle pH but also the long sarcomere length without difference in Mb percentage. Hardness and gumminess of hot-boning press ham were significantly(p<0.05) lower than those of cold-boning samples. These results implied that color and pH of press ham did not affected by deboning time or muscle type of ham. However data suggested that texture and panel test of press ham might be improved by using hot-boned muscle due to long sarcomere length of raw meat.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.336-345
• /
• 2020

Objective: To investigate the treatment modalities (Tx-Mods) for patients with unilateral hemifacial microsomia (UHFM) according to Pruzansky-Kaban types and growth stages. Methods: The samples consisted of 82 Korean UHFM patients. Tx-Mods were defined as follows: Tx-Mod-1, growth observation due to mild facial asymmetry; Tx-Mod-2, unilateral functional appliance; Tx-Mod-3, fixed orthodontic treatment; Tx-Mod-4, growth observation due to a definite need for surgical intervention; Tx-Mod-5, unilateral mandibular or bimaxillary distraction osteogenesis (DO); Tx-Mod-6, maxillary fixation using LeFort I osteotomy and mandibular DO/sagittal split ramus osteotomy; Tx-Mod-7, orthognathic surgery; and Tx-Mod-8, costochondral grafting. The type and frequency of Tx-Mod, the number of patients who underwent surgical procedures, and the number of surgeries that each patient underwent, were investigated. Results: The degree of invasiveness and complexity of Tx-Mod increased, with an increase in treatment stage and Pruzansky-Kaban type (initial < final; [I, IIa] < [IIb, III], all p < 0.001). The percentage of patients who underwent surgical procedures increased up to 4.2 times, with an increase in the Pruzansky-Kaban type (I, 24.1%; IIa, 47.1%; IIb, 84.4%; III, 100%; p < 0.001). However, the mean number of surgical procedures that each patient underwent showed a tendency of increase according to the Pruzansky-Kaban types (I, n = 1.1; IIa, n = 1.5; IIb, n = 1.6; III, n = 2.3; p > 0.05). Conclusions: These findings might be used as basic guidelines for successful treatment planning and prognosis prediction in UHFM patients.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.148-148
• /
• 2011

Recently, there have been many research activities to develop the large-area plasma source, which is able to generate the high-density plasma with relatively good uniformity, for the plasma processing in the thin-film solar cell and display panel industries. The large-area CCP sources have been applied to the PECVD process as well as the etching. Especially, the PECVD processes for the depositions of various films such as a-Si:H, ${\mu}c$-Si:H, Si3N4, and SiO2 take a significant portion of processes. In order to achieve higher deposition rate (DR), good uniformity in large-area reactor, and good film quality (low defect density, high film strength, etc.), the application of VHF (>40 MHz) CCP is indispensible. However, the electromagnetic wave effect in the VHF CCP becomes an issue to resolve for the achievement of good uniformity of plasma and film. Here, we propose a new electrode as part of a method to resolve the standing wave effect in the large-area VHF CCP. The electrode is split up a series of strip-type electrodes and the strip-type electrodes and the ground ones are arranged by turns. The standing wave effect in the longitudinal direction of the strip-type electrode is reduced by using the multi-feeding method of VHF power and the uniformity in the transverse direction of the electrodes is achieved by controlling the gas flow and the gap length between the powered electrodes and the substrate. Also, we provide the process results for the growths of the a-Si:H and the ${\mu}c$-Si:H films. The high DR (2.4 nm/s for a-Si:H film and 1.5 nm/s for the ${\mu}c$-Si:H film), the controllable crystallinity (~70%) for the ${\mu}c$-Si:H film, and the relatively good uniformity (1% for a-Si:H film and 7% for the ${\mu}c$-Si:H film) can be obtained at the high frequency of 40 MHz in the large-area discharge (280 mm${\times}$540 mm). Finally, we will discuss the issues in expanding the multi-electrode to the 8G class large-area plasma processing (2.2 m${\times}$2.4 m) and in improving the process efficiency.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.515-524
• /
• 2010

The amylose content of starch is a major factor in the texture of cooked cereal grains. Therefore, down-regulation of amylose synthesis is one of the alternative method to improve eating quality of rice. We developed transgenic rice plants designed to suppress granule-bound starch synthase I(GBSSI) gene using RNA interference(RNAi) technology. Transgenic plants with RNAi vector containing the 3'-UTR region of GBSSI showed a lower amylose content in rice endosperm than that of wild-type. The range of amylose content was 5.9~9.0% in the transgenic plants, whereas that of wild-type was 17.7~18.0%. Transgenic rices showed the decrease of short chain and the increase of long chain by analyzing chain length distribution of amylopectin in the endosperm. In the SEM micrographs, we found that compound starch granules in whole grains of the wild-type rice were readily split during fracturing, while the starch granules in RNAi-transgenic lines showed small voluminous, non-angular rounded bodies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2007

This study shows an implementation of partial holes in an initial design domain in order to improve convergences of topology optimization algorithms. The method is associated with a bubble method as introduced by Eschenauer et al. to overcome slow convergence of boundary-based shape optimization methods. However, contrary to the bubble method, initial holes are only implemented for initializations of optimization algorithm in this approach, and there is no need to consider a characteristic function which defines hole's deposition during every optimization procedure. In addition, solid and void regions within the initial design domain are not fixed but merged or split during optimization Procedures. Since this phenomenon activates finite changes of design parameters without numerically calculating movements and positions of holes, convergences of topology optimization algorithm can be improved. In the present study, material topology optimization designs of Michell-type beam utilizing the initial design domain with initial holes of varied sizes and shapes is carried out by using SIMP like a density distribution method. Numerical examples demonstrate the efficiency and simplicity of the present method.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.295-304
• /
• 2020

This study analyze the meaning and the characteristic of branded contents ad, one of the leading advertising methods. 10 experts who work for various advertising fields were inteviewed through semi-Structured Interview method and connected the keywords. First, branded contents advertisement can be split into two part, congenital branded contents ad and acquired branded contents ad. Congenital branded contents have a customer process, (Attention-Awareness-Interest-Compromise) and agency process (Combine-Seed-Continuous- Compromise). acquired branded contents ad also have a different customer process (Attention-Interest-Awareness-Compromise) and agency process (Seed-Rootage - Combine- Compromise). 'Combine' stage and 'Compromise' stage is the new features in the branded contents ad and 'awareness'stage also has a different meaning with previous theories.