• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.717-727
• /
• 2003

The HIPERLAN/2(HIgh PERformance Local Area Network Type2) is one of the wireless LAN standards for providing raw data rates of up to 54 Mbps. The MAC protocol of HIPERLAN/2 is based on TDMA/TDD, and resources in one MAC frame can be allocated dynamically by Access Point(AP). The random channel(RCH) is defined for the purpose of giving a mobile terminal the opportunity to request transmission resources in the uplink MAC frames. It is desirable that the number of RCHs is dynamically adapted by the AP depending on the current traffic situation. Allocation of excessive RCHs may waste radio resources and insufficient RCHs compared to traffic loads may result in many collisions in access attempts. We propose an RCH allocation scheme based on split algorithm in HIPERLAN/2. The simulation and analytic results show that the proposed scheme achieves a higher channel throughput, lower access delay and delay jitter than previously proposed RCH allocation schemes.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.43-55
• /
• 2001

A continuously variable transmission(CVT) mechanism composed of one differential gear unit and one continuously variable unit(CVU) can be classified according to the coupling of CVU and the direction of power flows. The mechanism has many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range and generation of geared neutral. The CVT mechanism considered here is the input coupled type which combines the functions of a 2K-H I type differential gear unit and a V-belt type CVU. One shaft of the CVU is connected directly to the input shaft and another shaft of it is linked to the differential gear unit. It is shown that some fundamental relations(speed ratios, power flows and efficiencies) for twelve mechanisms previously described are valid by various experimental studies, six of them produce a power circulation and the others produce a power split. Some useful comparisons between theoretical analysis and experimental results are presented. General properties also are discussed, which connect following power flow modes : (a) power circulation mode; (b) power split mode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.423-425
• /
• 2017

When many space launchers and rockets need to be separated, the pyrotechnic separators have been widely used because of their high reliability and high energy generation. However, intensive pyroshock and debris from the high-explosive type separator may cause fatal damage to the equipment inside of the space launchers or rockets. To solve this problem, a pressure-cartridge type low-impact separator has been developed. In this study, one of the low-impact separators, the split-type pyrolock, was used. We established a mathematical model for the split-type pyrolock that simulates the state of combustion gas and the separation behavior of four independent internal components and verified the mathematical model through comparing with experiment results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.273-279
• /
• 2013

In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator, and oscillator for 5.8GHz band is designed using proposed split ring resonator. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}$/4 microstrip resonator. Because it is possible that varactor diode or lumped capacitor is placed on the gaps of split ring resonator, resonant frequency can be controlled by bias voltage. We can design voltage controlled oscillator using proposed split ring resonator. Thus, due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• Journal of applied mathematics & informatics
• /
• v.34 no.5_6
• /
• pp.467-478
• /
• 2016

In this paper, we propose an Ishikawa-type extra-gradient iterative algorithm for finding a solution of split feasibility, fixed point problems and equilibrium problems of quasi-nonexpansive mappings. It is proven that under suitable conditions, the sequences generated by the proposed iterative algorithms converge weakly to a solution of the split feasibility, fixed point problems and equilibrium problems. An example is given to illustrate the main result of this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.212-223
• /
• 1995

To improve the efficiency of a power transmission system with slip elements, power split/circulation system is applied. The performance of a power split/circulation system varies widely by the change of the followings; the layout of system, the type and gear ratio of planetary gear, the performance of slip element, etc. Therefore, when one designs such a power transmission system or when one determines the economic/power mode of system, a certain performance prediction method is needed. In this study, the internal power flow pattern of a power split/circulation system is theoretically analyzed on several transmission systems. And an effective performance prediction method(so called performance locus diagram) is presented. By this method, the effects of design factors can be easily understood and the qualitative performances of system can be clearly evaluated.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.95-95
• /
• 2003

In this study, the influences of organic solvent viscosity on absorption properties of split-type micro fiber fabrics is examined with real time absorption measurement device built by our research group recently. And the absorption behavior of these fabrics is analyzed by material, fineness, construction, weight, thickness, and density of fabrics.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.394-397
• /
• 1998

Characteristics of air-jet textured yarns are determined by linear density, strength, and instability together with structural properties. Such characteristics are affected by various processing parameters and supply yam properties. In this Paper, specially, we have studied on the effect of air jet texturing conditions not only on texturing characteristics but also on splitting behavior using split-type ultrafine P/N filaments and their draw textured yarns as raw materials. (omitted)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.91-97
• /
• 2020

A split-die design for the cold forging of symmetric parts such as those having a hexagonal cross-section is presented in this paper. Parts with a hexagonal cross-section, such as bolt heads and nuts, should be forged with a die that has a hexagonal-shaped hole. A split type die is required to mitigate the buildup of stress concentrations located at the corners of the hexagonal hole. Generally, the insert of a hexagonal die is made by cutting each corner of a cylinder using a hexagonal hole and then combined with the die and shrink-fitted. However, split dies face problems when extruding material at the corners of the hexagonal split die. To address this problem, two types of split dies were evaluated: rounded hexagonal dies and angular hexagonal dies. The effects of the pre-stress ring on the dies were compared and analyzed and results show that using the angular split hexagonal die can extend the lifetime of forging dies.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.28-36
• /
• 2002

The continuously variable transmission (CVT) mechanism considered here is the output coupled type which combines the functions of a 2K-H I type differential gear unit and a V-belt type continuously variable unit (CVU). One shaft of the CVU is connected directly to the output shaft and another shaft of it is linked to the differential gear unit. It is shown that some fundamental relations (speed ratios, power flows and efficiencies) for twelve mechanisms previously described are valid by various experimental studies, six of them produce a power circulation and the others produce a power split. Parametric analysis is carried out in relation to the efficiency, speed ratio and power ratios in order to assist in the design of an optimum configuration. Some useful properties associated with power flow modes also are discussed in the output coupled type continuously variable transmission.