• Computers and Concrete
• /
• 제9권2호
• /
• pp.81-97
• /
• 2012

This paper presents development of double-K fracture model for the split-tension cube specimen for determining the unstable fracture toughness and initial cracking toughness of concrete. There are some advantages of using of split-tension cube test like compactness and lightness over the existing specimen geometries in practice such as three-point bend test, wedge splitting test and compact tension specimen. The cohesive toughness of the material is determined using weight function having four terms for the split-tension cube specimen. Some empirical relations are also suggested for determining geometrical factors in order to calculate stress intensity factor and crack mouth opening displacement for the same specimen. The results of double-K fracture parameters of split-tension cube specimen are compared with those obtained for compact tension specimen. Finally, the influence of the width of the load-distribution of split-tension cube specimen on the double-K fracture parameters for laboratory size specimens is investigated. The input data required for determining double-K fracture parameters for both the specimen geometries are obtained using well known version of the Fictitious Crack Model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.353-358
• /
• 2002

The purpose of this paper was to estimate the cumulative damage of pavement concrete by split tension fatigue test. The split tension fatigue test of variable amplitude loading were performed in two and three stages. The results of the fatigue test by variable amplitude loading showed that the sums of damage were greater than 1 in the increasing sequence loading tests, and less than 1 in the decreasing sequence loading tests. The remaining life estimated by equivalent damage theory was almost similar to that of experimental results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.1003-1008
• /
• 2002

The purpose of this research was to obtain fatigue property of pavement concrete by split tension fatigue test. The specimens of pavement concrete were fabricated using the concrete at jop site. The fatigue tests of split tension were performed by 4 stress levels(90%, 80%, 70%, 60%) and 3 stress ratio(0.1, 0.3, 0.5). From this research, the S-N relationship, S-N-P relationship was derived and Weibull probability density functions was plotted using the distribution parameters.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.163-175
• /
• 2016

This paper presents a revised procedure for computation of double-K fracture parameters of concrete split-tension cube specimen using weight function of the centrally cracked plate of finite strip with a finite width. This is an improvement over the previous work of the authors in which the determination of double-K fracture parameters of concrete for split-tension cube test using weight function of the centrally cracked plate of infinite strip with a finite width was presented. In a recent research, it was pointed out that there are great differences between a finite strip and an infinite strip regarding their weight function and the solution of infinite strip can be utilized in the split-tension specimens when the notch size is very small. In the present work, improved version of LEFM formulas for stress intensity factor, crack mouth opening displacement and crack opening displacement profile presented in the recent research work are incorporated. The results of the double-K fracture parameters obtained using revised procedure and the previous work of the authors is compared. The double-K fracture parameters of split-tension cube specimen are also compared with those obtained for standard three point bend test specimen. The input data required for determining double-K fracture parameters for both the specimen geometries for laboratory size specimens are obtained using well known version of the Fictitious Crack Model.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2209-2219
• /
• 1997

A split hopkinson bar could be used for obtaining the high strain rate material properties of sheet metals for an autobody. In high speed tensile tests of sheet matals, a new design of a tension split Hopkinson bar apparatus is needed. The design of grips and an anvil length are numerically analyzed with ABAQUS/Explicit for the new apparatus of split Hopkinson bars. From the experiments with the new apparatus, the material properties of SPCEN in the high strain rate state have been acquired and compared with quasi-static experimental results. The material properties of SPCEN as well as other sheet metals in an autobody are indispensible for the analysis of crashworthness. Nevertheless the experiment of sheet metal in the high strain rate state has not been done or reported.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.311-314
• /
• 2003

Concrete structures such as bridge, pavement, airfield, and offshore structure are normally subjected to repeated load. This paper proposes a failure probability models of concrete subjected to split tension repeated-loads, based on experimental results. The fatigue tests were performed at the stress ratio of 0.1, the loading shape of sine, the frequency of 20Hz, and the stress levels of 90, 80 and 70%. The fatigue test specimen was 150mm in diameter and 75mm in thickness. The fatigue analysis did not include which exceeded 0.9 of statistical coefficient of determination values or did not failure at 2$\times$$10^6$ cycles. The graphical method, the moment method, and maximum likelihood estimation method were used to obtain Weibull distribution parameters. The goodness-of-fit test by Kolmogorov-Smirnov test was acceptable 5% level of significance. As a result, the proposed failure probability model based on the two-parameter($\alpha and \mu$) Weibull distribution was good enough to estimate accurately the fatigue life subjected to tension mode.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.84-88
• /
• 1997

The Jonhnson-Cook constitutive relation has been used in dynamic plasticities. The constants of the Jonhson-Cook relation of sheet metals for an autobody is not known yet. In this paper, the material properties of SPCEN, SPCC and SPRC in the high strain rate states have been acquired. A new tension split Hopkinson bar was used in high speed tensile tests of sheet metals. The experimental results acquired from the apparatus are used to determine the constants of Johnson-Cook constitutive relation of sheet metals. This results can be used to analysis of crashworthness.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.27-35
• /
• 2004

지금까지 콘크리트에 대한 피로실험과 연구는 대부분 압축응력, 휨응력을 받는 경우에 대하여 연구를 진행하였으나 실제 교량이나 도로 포장콘크리트 구조물은 이축응력상태의 조합응력을 받게 된다. 따라서, 본 연구에서는 이러한 콘크리트 구조체가 받게 되는 이축응력 상태를 이상적으로 재현할 수 있는 쪼갬인장 피로실험방법을 제안하고 적용성을 평가 하고자 하였다. 실험은 ${\phi}15{\times}30cm$를 사용한 KS 규정을 응용하여 ${\phi}15{\times}7.5cm$의 시편을 제작하고, 쪼갬인장 피로실험에 적용하기 위한 타당성 검증을 수행하였으며, 이상적 탄성재료인 강재와 고체의 비교를 위하여 모르타르 시편을 제작하여 검증실험을 수행하였다. 또한, 이론적 고찰과 유한요소 해석을 수행하여 이론치와 해석치의 비교 고찰하였으며 정적 강도측정 및 게이지 부착실험을 수행하여 타당성을 입증하고자 하였다. 실험결과, FEA결과, 수평응력과 압축응력의 비는 3.1로 나타나 이론치 3.0과 유사한 결과를 얻을 수 있었다. 수평응력은 시편의 길이가 30cm일 경우 이론상 3MPa이지만, 본 연구에서는 시편의 길이가 30cm와 5cm일 때 각각 2.98MPa와 2.96MPa로 나타났다. 쪼갬인장 피로실험방법은 유한요소 해석, 정적 강도측정 및 게이지 부착실험모두에서 충분한 타당성을 나타내었으며, 이 방법은 실제 응력 모사, 실험의 간편성, 현장 시편 이용 가능성 등 많은 장점을 가지고 있는 것으로 판단되어 향후 교량이나 도로포장 구조물에 사용되는 콘크리트의 피로거동을 모사하는데 적합한 실험방법으로 사료된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.106-110
• /
• 1997

A split Hopkinson bar has been used for obtaining material properties in high strain rate state, In this paper, the apparatus was modified to obtain the high strain rate properties of sheet metal for an autobody. From the experiments with the new apparatus, the material properties of SPCEN in the high strain rate state have been acquired and compared with quasi-static experimental results.

• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.541-549
• /
• 2003

고력볼트 인장접합 형신인 Split Tee 접합은 접합부의 효율성과 시공성이 우수하여 유럽등지에서는 중저층의 건축물에 많이 적용되고 있으나 국내에서는 널리 사용되지 않은 상황이다. 이는 고력볼트와 Split Tee를 구성하는 판재의 강성에 따라 지레작용의 효과를 포함하는 보트의 인장 전단파괴와 Split Tee의 송성파괴가 상호작용을 일으켜 해석과 설계가 복잡하다는 점과 시공상의 정밀도 확보가 쉽지 않기 때문이다. Split Tee접합에 관한 연구는 미국, 일본, 유럽등지에서 다양한 방법으로 진행되고 있지만 국내의 경우 아직 초보적 단계에 머물고 있다. 본 연구에서는 실험을 통한 Split Tee접합부의 거동, 즉 지레작용의 영향과 그에 따른 반력작용의 특성을 파악하여 Split Tee접합 설계를 하는데 있어 기초 자료를 제공하고자 한다.