• 제목/요약/키워드: Split Plane

검색결과 101건 처리시간 0.026초

CSRR을 이용한 WLAN 대역 저지 특성 CPW 급전 광대역 안테나 설계 (Design of CPW-Fed Broadband Antenna Using the CSRR for WLAN Band Notched Characteristic)

  • 김장렬;이승우;김남;오병철
    • 한국전자파학회논문지
    • /
    • 제22권5호
    • /
    • pp.528-537
    • /
    • 2011
  • 본 논문에서는 CPW(Coplanar Waveguide) 구조와 대역 차단 특성을 갖는 CSRR(Complementary Split Ring Resonator)를 접지 면에 삽입하여 IEEE 802.11a(5.15~5.825 GHz) WLAN 대역이 저지된 광대역(Broadband) 안테나를 설계하고 제작하였다. 제안된 안테나의 크기는 $36{\times}60{\times}1.6\;mm^3$이며, 제작에 사용된 기판 의 두께는 1.6mm이고, 유전율이 4.4인 FR-4 기판을 사용하였다. 안테나 측정 결과, 반사 손실이 -10 dB 이하를 기준으로 2.03~10.78 GHz의 광대역 특성을 만족하였으며, 이때 VSWR${\leq}$2를 만족하였다. CSRR을 적용한 결과, 약 5.4 GHz 대역의 중심 주파수를 갖고, 4.917~6.017 GHz에서 대역 저지 특성이 나타나는 것을 확인하였다.

Performance control analysis of concrete-filled steel tube sepa-rated spherical joint wind power tower

  • Yang Wen;Guangmao Xu;Xiazhi Wu;Zhaojian Li
    • Structural Engineering and Mechanics
    • /
    • 제87권2호
    • /
    • pp.137-149
    • /
    • 2023
  • In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

시각 차단과 불안정한 지지면을 이용한 불가리안 스플릿 스쿼트 운동 시 동적 균형 능력과 근속성의 비교 (Comparison of Dynamic Balance Ability and Leg Muscle Properties during Bulgarian Split Squat Exercises using the Visual Block and Unstable Support Plane)

  • 양진현;이교현;박경호;박수경
    • 대한정형도수물리치료학회지
    • /
    • 제29권1호
    • /
    • pp.41-52
    • /
    • 2023
  • Background: Bulgarian split squat (BSS) is beneficial to improve dynamic balance ability and muscle activity of lower extremities, however its effects have not been fully investigated. Therefore, this study aimed to compare changes in dynamic balance ability and muscle properties according to various modifications of BSS exercises. Methods: Thirty healthy male volunteers participated in this study, and they were randomly divided into three different groups. The subjects performed the BSS exercise either on a stable surface with the eyes opened (n=10) or eyes closed (n=10), and on an unstable support plane with eyes opened (n=10) conditions, respectively. Dynamic balance ability was measured via Biodex balance system under the eyes-opened and closed conditions. Additionally, muscle properties of the rectus femoris (RF), vastus medialis (VM) and vastus lateralis (VL) were evaluated. Results: Dynamic balance ability did not show the significant differences among the groups that performed the BSS exercises. However, in the Unstable group, there were significant differences in the overall stability index and anterior posterior stability index under the eyes-closed condition between pre-exercise and post-exercise. In comparison of muscle properties according to the groups, RF muscle showed a significant difference in amount of change of elasticity (p=.038). Additionally, there were significant changes in post measurements of VM muscle tone (p=.016), stiffness (p=.012) and elasticity (p=.002). VL muscle, however had no significant differences in muscle properties. Conclusion: These results indicate that BSS exercises could induce the alteration of RF and VM muscle properties, in particular VM muscle which is susceptible to weakness. Thus, BSS could be applied in various ways as an effective rehabilitation exercise.

  • PDF

조도가 2차원 벽부착 제트유동에 미치는 영향에 관한 연구 (An Investigation of Roughness Effects on 2-Dimensional Wall Attaching Offset Jet Flow)

  • 윤순현;김대성;박승철
    • 대한기계학회논문집
    • /
    • 제19권1호
    • /
    • pp.219-230
    • /
    • 1995
  • The flow characteristics of a two-dimensional offset jet issuing parallel to a rough wall is experimentally investigated by using a split film probe with the modified Stock's calibration method. The mean velocity and turbulent stresses profiles in the up and down-stream locations of the wall-attachment regions are measured and compared with those of the smooth wall attaching offset jet cases. It is found that the wall-attachment region on the rough wall is wider than on the smooth wall for the same offset height and the jet speed. The position of the maximum velocity point is farther away from the wall than that for the smooth wall case because of the thick wall boundary layer established by the surface roughness. It is concluded that the roughness of the wall accelerates the relaxation process to a redeveloped plane wall jet and produces a quite different turbulent diffusion behavior especially near the wall from comparing with the smooth plane wall jet turbulence.

H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 (Permittivity Characteristic Analysis of Planar Substrates Using H-shaped Resonant Aperture)

  • 여준호;이종익
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.55-56
    • /
    • 2018
  • 본 논문에서는 H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 방법을 제안하였다. 이를 위해 마이크로스트립 전송선로의 접지면에 H-모양 공진 개구를 추가하여 대역 저지 필터를 생성하였다. 마이크로스트립 전송선로의 접지면 뒤에 2 mm 두께의 평면 기판을 놓고 기판의 유전율 변화에 따른 공진주파수의 변화를 조사하였다. 기존의 상보 분할 링 공진기 구조를 사용하였을 때와 비교하여 기준 공진주파수에 대한 주파수의 변화 비가 커짐을 알 수 있었다.

  • PDF

Quadruple Band-Notched Trapezoid UWB Antenna with Reduced Gains in Notch Bands

  • Jin, Yunnan;Tak, Jinpil;Choi, Jaehoon
    • Journal of electromagnetic engineering and science
    • /
    • 제16권1호
    • /
    • pp.35-43
    • /
    • 2016
  • A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.

개구교합을 가진 3급 부정교합환자의 악교정수술후 재발에 관한 연구 (SKELETAL RELAPSE AFTER ORTHOGNATHIC SURGERY OF CLASS III SKELETAL OPEN-BITE)

  • 송재철;이상한
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제15권3호
    • /
    • pp.229-237
    • /
    • 1993
  • 자자는 1991년 2월부터 1993년 2월까지 경북대학교병원 구강악안면외과에 하악전돌 및 개구교합을 주소로 내원하여 하악골 시상골절단술을 이용하여 악교정 수술을 받은 환자중 추적 조사가 가능했던 9명의 개구교합을 동반한 하악 전돌증 환자와 개구교합이 없는 하악 전돌증 환자 9명, 총 18명을 대상으로 두부 상사선 규격사진을 이용한 술후 재발에 관한 연구를 시행하여 다음과 같은 결과를 얻었다. 1. 비개구교합군에 비해 개구교합군에서 술전 전안면고경, 하악 하연 평면각 및 하악 우각부 값이 더 크게 나타났으나 유의성은 없었다.(p>0.05) 2. 개구교합군에서 수술시 SNB 값과 하악 하연 길이의 변화량이 하악의 재발과 통계적으로 유의한 상관 관계가 있었다.(p.<0.01) 3. 개구교합군에서 전안면고경은 술후 비교적 안정되어 있었다. 4. 개구교합군과 비개구교합군에서 수술에 의한 하악 하연 평면각의 변화와 하악의 수평 이동량은 재발과 상관 관계가 없었다.(p>0.01) 5.개구교합을 가진3급 부정교합 환자에서 하악골 시상골 절단술을 시행시 본 연구에서는 수직적 재발보다는 수평적 재발에 문제가 있었다.

  • PDF

엘라스토머 임플란트를 사용한 엉덩이 확대 성형술 (Buttock Augmentation with Elastomer Implants)

  • 박봉권;김연환;안희창
    • Archives of Plastic Surgery
    • /
    • 제38권2호
    • /
    • pp.182-188
    • /
    • 2011
  • Purpose: The buttocks region has been associated with allure and sex appeal for centuries. Gluteal implants enable buttocks remodeling in a way that is not possible in other methods. One of the reasons that render gluteal implant surgeries unpopular is the fear of complications, the main problems being seroma, wound dehiscence, extrusion, and a visible or palpable implant. The authors present the XYZ technique, which provides anatomical reference points to guide the intramuscular dissection procedure in a feasible and safe way, resulting in a lower complication rate. Methods: The XYZ procedure was done for buttock augmentation on 8 patients from December 2009 to June 2010. Patient's ages ranged from 27 to 44 with a mean age of 36. Seven patients were applied the 250cc sized Elastomer implants with one patient 290cc sized implant. Preoperative marking was done with the patients in the standing position. Bisection of the gluteus maximus muscle was done at the midpoint thickness to create a plane for implant insertion, which is called the sandwich plane. Results: The 8 cases were performed safely without major complications. However one patient had minor wound dehiscence, and was managed with conservative treatment. Another patient had a discomfort on the buttocks for a long time. The patients were followed up for average 6 months. All patients were satisfied with the aesthetic results. Conclusion: In performing the XYZ technique for gluteal augmentation, the surgeon must split the muscle into two equal halves with anatomical reference points to guide the muscle detachment in a symmetrical way at an adequate depth. This method provides a guideline for the surgeon in determining the ideal plane during intramuscular dissection and gives predictable results with low complication rates. Intramuscular gluteoplasty with gluteal implants offers predictable, aesthetically pleasing results without contour irregularities and only a low incidence of major complications.

3-D CT를 이용한 악교정술 전후의 하악과 설골의 위치에 관한 연구 (THE POSITIONAL RELATIONSHIP BETWEEN THE MANDIBLE AND THE HYOID BONE IN MANDIBULAR PROTRUSION AFTER ORTHOGNATHIC SURGERY EVALUATED WITH 3-D CT)

  • 이상한;남정훈;정창욱;권대근
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제29권3호
    • /
    • pp.173-181
    • /
    • 2003
  • Purpose : This study was intended to evaluate the positional relationship between the hyoid bone and the mandible in patients with mandibular protrusion after mandibular set-back surgery by means of 3D-CT. Materials and methods : Preoperative(3 weeks before) and postoperative (6 weeks after) 3D-CT & cephalogram were taken on 32 patients(12 male, 20 female, mean age of 23.2) treated by bilateral sagittal split osteotomy with rigid fixation. The angular measurement on 3D-CT basilar view were deviation of Me & H, long axis angle of left & right cornu majus. The lineal measurement on 3D-CT basilar view were composed of intercondylar line and coordinates(x,y) of Me & H. The angular & lineal measurement of lateral cephalogram were composed of mandibular plane angle, SNA, SNB, ANB, FH-NA & FH-NB, and coordinates(x,y) of B, Pog, Me & H, PAS, Lpw, MPH and IAS. On the frontal cephalogram, deviation of Me were evaluated. Results : The mean mandibular set-back was 8.0mm horizontally and mandibular plane angle was slightly increased. The hyoid bone was displaced postero-inferiorly, the distance between MP(mandibular plane) and H(hyoid bone) was increased and the posterior airway space values (PAS, Lpw, IAS) were decreased. The coordinates Me(x,y), H(x,y) and deviation angle Me'& H' were revealed the strong positive correlation. Conclusion : The results revealed that the horizontal, vertical and transverse relationship of the mandibular and the hyoid bone movements were significantly correlated in patients performed mandibular set-back surgery.

Accurate transfer of bimaxillary orthognathic surgical plans using computer-aided intraoperative navigation

  • Chen, Chen;Sun, Ningning;Jiang, Chunmiao;Liu, Yanshan;Sun, Jian
    • 대한치과교정학회지
    • /
    • 제51권5호
    • /
    • pp.321-328
    • /
    • 2021
  • Objective: To examine the accuracy of computer-aided intraoperative navigation (Ci-Navi) in bimaxillary orthognathic surgery by comparing preoperative planning and postoperative outcome. Methods: The study comprised 45 patients with congenital dentomaxillofacial deformities who were scheduled to undergo bimaxillary orthognathic surgery. Virtual bimaxillary orthognathic surgery was simulated using Mimics software. Intraoperatively, a Le Fort I osteotomy of the maxilla was performed using osteotomy guide plates. After the Le Fort I osteotomy and bilateral sagittal split ramus osteotomy of the mandible, the mobilized maxilla and the distal mandibular segment were fixed using an occlusal splint, forming the maxillomandibular complex (MMC). Real-time Ci-Navi was used to lead the MMC in the designated direction. Osteoplasty of the inferior border of the mandible was performed using Ci-Navi when facial symmetry and skeletal harmony were of concern. Linear and angular distinctions between preoperative planning and postoperative outcomes were calculated. Results: The mean linear difference was 0.79 mm (maxilla: 0.62 mm, mandible: 0.88 mm) and the overall mean angular difference was 1.20°. The observed difference in the upper incisor point to the Frankfort horizontal plane, midfacial sagittal plane, and coronal plane was < 1 mm in 40 cases. Conclusions: This study demonstrates the role of Ci-Navi in the accurate positioning of bone segments during bimaxillary orthognathic surgery. Ci-Navi was found to be a reliable method for the accurate transfer of the surgical plan during an operation.