• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.423-430
• /
• 2011

The most satisfactory split-beam transducer for fish sizing maintains a wide bearing angle region for correct fish tracking without interference from side lobes and lower sensitivity to fish echoes outside of the main lobe region to correctly measure the angular location of free-swimming fishes in the sound beam. To evaluate the performance of an experimentally developed 50 kHz split-beam transducer, the angular location of a target was derived from the electrical phase difference between the resultant signals for the pair of transducer quadrants in the horizontal and vertical planes consisting of 32 transducer elements. The electrical phase difference was calculated by cross-spectral density analysis for the signals from the pair of receiving transducer quadrants, and the directivity correction factor for a developed split-beam transducer was estimated as the fourth-order polynomial of the off-axis beam angle for the angular location of the target. The experimental results demonstrate that the distance between the acoustic centers for the pair of receiving transducer quadrants can be controlled to less than one wavelength by optimization with amplitude-weighting transformers, and a smaller center spacing provides a range of greater angular location for tracking of a fish target. In particular, a side lobe level of -25.2 dB and an intercenter spacing of $0.96\lambda$($\lambda$= wavelength) obtained in this study suggest that the angular location of fish targets distributing within a range of approximately ${\pm}28^{\circ}$ without interference from side lobes can be measured.

• Health Policy and Management
• /
• v.23 no.1
• /
• pp.44-51
• /
• 2013

Background: This study designed to evaluate the homogeneity of Korean diagnosis related group (KDRG) version 3.4 classification system. Methods: The total 5,921,873 claims data submitted to the Health Insurance Review and Assessment Service during 2010 were used. Both coefficient of variation (CV) and reduction in variance of cost were measured for evaluation. This analysis was divided into before and after trimming outliers at the level of adjacent DRG (ADRG), aged ADRG (AADRG) split by age, and DRG split by complication and comorbidity. Results: At the each three level of ADRG, AADRG, and DRG, there were 38.9%, 38.7%, and 30.0% of which had a CV > 100% in the untrimmed data and there were 1.4%, 1.4%, and 1.9% in the trimmed one. Before trimming outliers, ADRGs explained 52.5% of the variability in resource use, AADRGs did 53.1% and DRGs did 57.1%. The additional explanatory power by age and comorbidity and complication (CC) split were 0.6%p and 4.6%p for each, which were statistically significant. After trimming outliers, ADRGs explained 75.2% of the variability in resource use, AADRGs did 75.6%, and DRGs did 77.1%. The additional explanatory power were 0.4%p and 2.0%p for each, which were statistically significant too. Conclusion: The results demonstrated that KDRG showed high homogeneity within groups and performance after trimming outliers. But there were DRGs CV > 100% after age or CC split and the most contributing factor to high performance of KDRG was the ADRG rather than age or CC split. Therefore, it is recommended that the efforts for improving clinical homogeneity of KDRG such as review of the hierarchical structure of classification systems and classification variables.

• Culinary science and hospitality research
• /
• v.18 no.2
• /
• pp.82-90
• /
• 2012

This study was conducted to evaluate a take-out food safety perception instrument that could be used by foodservice establishments. A total of 324 responses was collected via online survey, and 299 responses (92.3%) were used for the statistical analysis. Data was randomly split into two groups. Exploratory Factor Analysis (EFA) was performed on the first split-half sample (n=150) to identify a factor structure using standard principal component analysis. EFA revealed three dimensions, titled "Consumer food safety perception," "Take-out food handling," and "Elements impacting on purchase decisions." Confirmatory Factor Analysis (CFA) was performed on the remaining half sample (n=149) using Structural Equation Modeling (SEM). CFA revealed acceptable absolute model fits for three dimensions and excellent comparative model fits for the instrument. These findings propose standardized measures that can be useful in assessing the take-out food safety perception.

• Communications for Statistical Applications and Methods
• /
• v.4 no.2
• /
• pp.581-588
• /
• 1997

Univariate F test is based on the multisample sphericity assumption. Robustness for tests of a main effect of the within-subjects factor was investigated when the assumptions of the onmibus F tests are violated in a split-plot design with one between-subjects factor using untrimmed data and trimmed data. The results indicate that when sample sizes are unbalanced and dispersion matrices are heterogeneous, the CIGA and the $CIGA_T$ tests better control Type I error rates than do the $F_T$test and the$\widetilde{\xi_T}$test.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.6
• /
• pp.354-359
• /
• 2012

Objectives: The purpose of this study was to investigate whether the age factor would be related with stability of mandibular setback surgery for patients with mandibular prognathism. Materials and Methods: We compared the relapse patterns of 47 patients divided into three age groups (termed younger, adult, and older). The younger group consisted of patients between 15 and 17 years old; the adult group was made up of patients between 21 and 23 years old, and the older group was made up of patients more than 40 years old. The positional change of B point was evaluated at preoperative, postoperative, and follow-up states. Results: The horizontal relapse ratio was 21.7% in the younger group, 15.3% in the adult group, and 15.7% in the older group. Although relatively higher degrees of relapse were found in the younger group, this increase was not statistically significant. Spearman's correlation analysis was performed to explore other factors contributing to relapse. We subsequently found that the amount of relapse was related to horizontal setback. Conclusion: Although the degree of relapse in younger patients is not significant;y higher compared to other groups. The major contributing factor to relapse after sagittal split ramus osteotomy is amount of setback rather than age when the surgery was performed to patients over than 15 years of age.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.202-207
• /
• 2010

In this paper, a novel voltage-controlled oscillator(VCO) using the open loop multiple split ring resonator(OLMSRR) is presented for improving the phase noise, implemented in 130 nm CMOS technology. Compared with the conventional CMOS LC resonator, the proposed CMOS OLMSRR has the larger coupling coefficient value, which makes a higher Q-factor, and has improved the phase noise of the VCO. The proposed CMOS VCO based OLMSRR has the phase noise of -99.67 dBc/Hz @ 1 MHz in the oscillation frequency. Compared with the VCO using the conventional CMOS LC resonator and the proposed VCO using the CMOS OLMSRR structure has been improved in 7 dB. The prototype 24 GHz CMOS VCO is implemented in 130 nm CMOS and occupies a compact die area of $0.7\;mm{\times}0.9\;mm$.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.769-782
• /
• 2020

A Prestressed stayed steel column is an efficient and lightweight way with regard to enhancing the stability behaviour of a compression column. In the past, researchers primarily concentrated on investigating the behaviour of stayed steel columns with horizontal crossarms. However, this article focuses on prestressed stayed steel columns with split-up crossarm system, in which the crossarms are aslant and rotational symmetrically arranged. A mathematical formula calculating the optimal pretension that corresponds to the maximum critical buckling load was established according to geometric analysis based on the small deformation assumption. It was demonstrated that critical buckling mode of this stayed column is different from the one with horizontal crossarms. The governing imperfection direction that should be adopted in the nonlinear buckling analysis was determined in this work. In addition, the effects of crossarm inclination, stay diameter, and crossarm length on the stability behaviour were investigated. An influencing factor denotes the ratio of the load carrying capacity of the prestressed stayed steel column to the Euler load of the main column was also obtained.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.22-31
• /
• 2010

In this paper, a new split ring resonator using left-handed meta-material adapted in a bandpass filter with 2-stages is suggested. In this proposed bandpass filter, the size of the novel resonator can be easily controlled. Also, the bandwidth can be adjusted with the position of the tapped-line. The proposed resonator and filter has the center frequency of 10 GHz for I-band in military-satellite communication system with the Qe value of 184. The experimental results of the filter show that the insertion and return losses are 1.43 dB and 16.8 dB with bandwidth of 10 %, respectively.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.307-312
• /
• 2011

In the macro/femto cellular networks, the portion of channels assigned to each cell is a critical factor which sets the stability and the performance of the whole system. To grasp the concrete influence that the channel split portion have on the system, we present the queueing model for IP based macro/femto cellular networks, and find the stability conditions. Additionally we provide the strategy to decide the portion of channels allocated to each cell. Through the experiments, we prove that the proposed strategies operate feasibly in various network environments, and on the basis of these results we discuss the efficient system structure plan.

• Coupled systems mechanics
• /
• v.7 no.2
• /
• pp.177-195
• /
• 2018

Reinforced concrete buildings in a seismically active area can be designed as DCM (medium ductility) or DCH (high ductility) class according to the regulations of Eurocode 8. In this paper, two RC buildings, one with a wall structural system and the other with a frame system, previously designed for DCM and DCH ductility, were analysed by using incremental dynamic analysis in order to study differences in the behaviour of structures between these ductility classes, especially the failure mechanism and ultimate collapse acceleration. Despite the fact that a higher behaviour factor of DCH structures influences lower seismic resistance, in comparison to DCM structures, a strict application of the design and detailing rules of Eurocode 8 in analysed examples caused that the seismic resistance of both frames does not significantly differ. The conclusions were derived for two buildings and do not necessarily apply to other RC structures. Further analysis could make a valuable contribution to the analysis of the behaviour of such buildings and decide between two ductility classes in everyday building design.