• 제목/요약/키워드: Splicing loss

검색결과 31건 처리시간 0.021초

광섬유 접속기 실습을 통한 공학 교육 연구 (A study of the Engineering Education Method Using Fiber Optic Splicing Experiments)

  • 이승홍;이종길
    • 한국실천공학교육학회논문지
    • /
    • 제2권1호
    • /
    • pp.42-46
    • /
    • 2010
  • 공학교육의 한 방법으로 광섬유 센서 제작 시 반드시 필요한 광섬유 접속기 사용은 보다 감도가 높은 센서를 제작하는데 필수적이다. 본 연구에서는 광섬유 접속기를 이용한 광 접속 손실을 실제 실험을 통하여 평가하고 실습에 사용된 방법이 교육적 효과를 거두기 위한 여러 가지 요소들을 분석하였다. 많은 실습을 통하여 광접속기 손실은 실습지들의 학습태도와 실험 환경의 변화에 많이 의존됨을 확인하였다.

  • PDF

단일 모드 광섬유 접속 손실 평가방법에 관한 연구 (Evaluation Method of Splicing Loss for Single Mode Optical Fiber)

  • 김종원
    • 한국통신학회논문지
    • /
    • 제18권6호
    • /
    • pp.841-847
    • /
    • 1993
  • 광섬유(光纖維)가 가지고 있는 손실(損失) 특성(特性) 중(中) 접속손실(接續損失) 값 평가방법(評價方法)을 측정(測定) 분석(分析)하였다. 현재(現在) 장파장용(長波長用) 단일(單一) 모드 광섬유(光纖維) 접속손실(接續損失) 측정(測定)은 Cut-Back 방법(方法)과 후방산란(後方散亂) 손실(損失) 측정방법(測定方法)으로 시행(施行)하고 있다. 이 두 방법(方法)을 사용(使用)하여 얻어진 측정(測定)값을 비교(比較)해 본 결과(結果) OTDR에 의한 접속손실평가(接續損失評價) 방법(方法)은 양(兩) 방향(方向)에서 측정(測定)된 값을 산술(算術) 평균(平均)으로 계산(計算)하여야 한다. 이 결과(結果)는 이론적(理論的)인 계산(計算)값과 일치(一致)함을 보여 주고 있으며 또한 접속(接續)될 두 광섬유(光纖維)의 후방(後方) 산란(散亂) 계수(係數) 값 차(差)에 의하여 발생(發生)됨을 보여준다. 따라서 광(光)케이블 시설시(施設時) 데이타 관리운영(管理運營) 측면(側面)에서 확실(確實)한 적용(適用)이 기대(期待)된다.

  • PDF

표준 단일모드 광섬유와 하이델타 광섬유사이의 저 손실 접속 기법 (Low Splicing Loss Technique between Standard Single Mode Fiber and High Δ Fiber)

  • 김광택;양병철
    • 한국광학회지
    • /
    • 제19권3호
    • /
    • pp.169-174
    • /
    • 2008
  • 열처리에 의한 광섬유 코어의 모드 확산과 모드 진화 현상을 이용하여 일반 통신용 단일모드 광섬유와 하이텔타(high ${\Delta}$) 광섬유 사이의 접속 손실을 줄일 수 있는 기법들을 제시하였다. 실험결과는 하이텔타 광섬유의 적절한 열처리를 통해 기계적 접속 손실이 2.3 dB에서 0.1 dB까지 감소함을 나타내었다. 반면 융착접속 후 접속 부위에 전기 방전이나 산소 불꽃으로 열을 인가하는 방법으로 $0.2{\sim}0.4dB$ 정도의 접속 손실을 달성하였다.

광자결정 광섬유와 단일모드 광섬유 저손실 융착접속 (Low Loss Fusion Splicing of Photonic Crystal Fiber and Single-Mode Fiber)

  • 안진수;박광노;김길환;이상배;이경식
    • 대한전자공학회논문지SD
    • /
    • 제46권7호
    • /
    • pp.15-21
    • /
    • 2009
  • 단일모드 광섬유(SMF)와 포토닉 밴드갭 광섬유(PBGF), SMF와 고비선형 광자결정 광섬유(NL-PCF)의 저손실 융착접속을 위한 방법을 제안하였다. SMF와 PBGF를 융착접속할 경우 PBGF의 공기구멍 붕괴현상에 의한 손실이 가장 큰 영향을 미치므로 PBGF의 공기구멍을 유지시키기 위해서 광섬유 융착접속기를 최적화하여 접속손실을 1.22 dB이하로 줄였다. SMF와 NL-PCF의 융착접속시에는 Ultra High Numerical Aperture(UHNA)광섬유를 두 광섬유 사이에 삽입하여 융착접속하는 방법을 적용하여 평균 2.59 dB이하로 접속손실을 줄였다.

광섬유 접속부의 환경 변화에 따른 손실변화 연구 (A Study on the Variation of Optical Fiber Splicing Loss due to Environment)

  • 김영호;유강희
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2006년도 하계학술대회
    • /
    • pp.105-110
    • /
    • 2006
  • The most sensitive part of the installed optical cable is the optical loss variation of the splicing point according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and variation. Through the bending test of optical fiber, rapid increase of optical loss was measured within the diameter of 30mm. The result of optical loss variation within the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of $-40^{\circ}C{\sim}80^{\circ}C$. There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes.

  • PDF

Role of $Mg^{2+}$ in RNA splicing of T4 td intron

  • Sung, Jung-Suk;Shin, Sook;Park, In-Kook
    • Journal of Microbiology
    • /
    • 제33권2호
    • /
    • pp.160-164
    • /
    • 1995
  • The splicing activity of T4 phage td intron RNA has been examined with various Mg$^{2+}$ ions such as MGCl$_{2}$, MgS $O_{4}$ and magnesium acetate using various splicing conditions such as different incubation time and temperature. The maximum splicing of td intron RNA occurred at the concentration of 5 mM MgCl$_{2}$. Raising the Mg$^{2+}$ concentration up to 15 mM appeared to promote P2 delection mutant to overcome the loss of some splicing activity. In both wild type and mutant, a complete hydrolysis of RNA occurred at 30 mM MgCI$_{2}$ MgS $O_{4}$ and magnesium acetate exhibited the rate and pattern of RNA splicing identical to MGCI$_{2}$. The optimal splicing conditions involve the incubation of RNA with 5 mM MgCI$_{2}$ at 58 .deg.C for 15 min. The results suggest that Mg$^{2+}$ may play a key role in the catalytic mechanism of td intron RNA.n RNA.

  • PDF

광섬유 접속부의 환경 변화에 따른 손실변화 연구 (A Study on the Optical Loss Variation of Optical Fiber Splicing Part due to Environment)

  • 유강희;김영호
    • 한국정보통신학회논문지
    • /
    • 제11권2호
    • /
    • pp.349-357
    • /
    • 2007
  • 광섬유 케이블 포설 후 전송특성 변화에 가장 민감한 부분인 광섬유 심선 접속부의 환경변화에 따른 전송 손실의 변화를 측정하기 위하여 구부림, 온도변화, 물 침투 후의 온도변화와 진동시험 을 수행하였다. 실험결과, 구부림 시험에서는 구부림 반경이 30mm 이하에서 손실이 급격하게 증가함을 확인하였으며 $-30^{\circ}C$에서 $60^{\circ}C$범위의 온도변화에 대하여 최대 0.02dB의 손실 변화가 발생함을 확인하였다. 그러나 물이 침투한 상태에서는 훨씬 민감한 손실변화 특성을 보였으며 $-40^{\circ}C$에서 $80^{\circ}C$ 사이의 온도변화에 대하여 최대 0.2dB까지 광섬유 접속부의 손실이 증가함을 확인하였다. 또한 1mm 정도의 미세한 진동에 대해서는 광 손실의 증가가 거의 발생하지 않았다. 본 논문의 실험결과는 향후 환경변화에 따른 광섬유 접속부 손실의 변화를 제거하기 위한 광 케이블 접속함 설계에 참고자료로 사용될 수 있을 것이다.

접속 각도 조정을 통한 신뢰성 있는 저 손실 현장조립 광커넥터 설계 (A Reliable Low-Loss Field-Installable Optical Connector Design by Splicing Angle Adjustment)

  • 박병철;임종석;정준호
    • 대한전자공학회논문지SD
    • /
    • 제48권9호
    • /
    • pp.6-12
    • /
    • 2011
  • 본 논문에서는 장거리, 저 손실 FTTH 구성에 필요한 현장조립 광커넥터(FIOC)의 접속 신뢰성과 성능 향상을 위한 방법을 제시한다. 이를 위해 FIOC의 내부 광섬유(inner fiber)와 외부 광섬유(field fiber)의 접속 면 각도를 최적화하여 별도의 각도 맞춤 툴과 광섬유 유각 절단기(fiber angled cleaver) 없이 조립하여도 저 손실 접속이 가능하도록 하였다. FIOC의 내부 광섬유(inner fiber)의 각도를 angled cleaver를 이용해 $2^{\circ}$로 고정하고, 외부 광섬유(field fiber)는 일반 광섬유 절단기를 이용해 오차를 포함해서 $0^{\circ}{\sim}1^{\circ}$의 각도로 서로 접속하여 삽입손실은 0.3dB 이내로 줄이고, 반사손실은 -60dB 이하를 유지 할 수 있도록 하였다.

포설된 단일모드 광섬유의 손실 특성 측정 (Loss Measurements of Installed Single-Mode Optical Fibers)

  • 전영윤;박재동;이만섭;양권식
    • 한국통신학회논문지
    • /
    • 제16권12호
    • /
    • pp.1266-1273
    • /
    • 1991
  • 장거리 국간 선로에 포설된 단일모드 광섬유의 샘플집단과 모집단의 손실특성을 측정하였고, 구간(중계)거리분포를 측정 분석하였다. 접속손실을 포함한 평균손실은 130nm와 155nm에서 각각 0.55 0.05dB/km, 0.59 0.11/km로써 1550nm대역의 손실이 크게 나타났다. OTDR에 의한 손실특성 조사결과 1550nm대역의 손실증가 주 요인은 접속지점의 부적절한 여장처리에 따른 것이었다. 그리고 국내 평균중계거리는 24 7 km로써 31km 이하의 구간거리가 전체의 약 90%를 차지하고 있었다.

  • PDF

Novel mechanism of a CDH1 splicing mutation in a Korean patient with signet ring cell carcinoma

  • Kim, Sol-Lip;Ki, Chang-Seok;Kim, Kyoung-Mee;Lee, Myoung-Gun;Kim, Se-Hwa;Bae, Jae-Moon;Kim, Jong-Won
    • BMB Reports
    • /
    • 제44권11호
    • /
    • pp.725-729
    • /
    • 2011
  • We report a novel mechanism of a CDH1 splicing mutation in a patient with signet ring cell carcinoma of the stomach. A 27-year-old man complaining of aggravated dyspepsia was diagnosed with signet ring cell carcinoma. Both his father and uncle had died of stomach cancer at a young age. DNA sequencing analysis of the CDH1 gene revealed a splice site mutation (c.833-2A>G). By RNA/cDNA sequencing analysis, CDH1 c.833-2A>G generated a new acceptor site within intron 6, causing the insertion of a 79-bp intronic sequence between exon 6 and 7 (r.833-79_833-1ins), and resulting in a frame shift. E-cadherin immunohistochemical staining revealed a loss of CDH1 expression. This study reveals the disease-causing mechanism of this splicing mutation, and emphasizes the need for functional studies using RNA samples for the accurate interpretation of detected splicing variant. This is the first reported case of a CDH1 mutation in a Korean patient.