• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1E
• /
• pp.1-6
• /
• 2005

The inner hair cell stereocilia of the guinea pig cochlea was examined under a scanning electron microscope (SEM) after loud tone exposure onto the ear drum of the animal. Before and after guinea pigs were exposed to intensive and continuous tone such as 106 dB SPL in intensity, the functioning of the cochlea was monitored by N1-N2 audiograms. The structural damage of the stereocilia of inner hair cells (IHCs) and outer hair cells (OHCs) was examined using the SEM in x 1500 magnification. The comparison between the functional change of the cochlea and the structural damage of the IHC stereocilia is done by means of photographic observation. It can be shown that the functional change might be related to the structural damage of the IHC stereocilia after intensive acoustic trauma.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1481-1484
• /
• 1987

The ALU of CMOS microcomputer have been designed with the 3um design rule for CMOS polysilicon gate and Its cells were layed out. The operation of circuits were simulated with EDAS_P. The widths and lengths of gates In the circuit were determined using SPlCE. The carry delay of the ALU was Improved by Manchester carry method. The results of logic and circuit simulation were in good agreement with expected circuit characteristics.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2053-2054
• /
• 2006

본 연구는 LCD 화질의 중요 Issue중 하나인 고속 응답 속도를 달성하기 위해 액정의 물성 및 TFT 구조 그리고 구동회로에 있어 필요한 조건을 찾기 위한 연구로서 응답속도에 관련된 주요 인자 중 특히 pixel에 인가되는 전압에 관련된 구동회로 조건과 TFT 구조에 초점을 맞추고 있다. 소비전류 Issue가 없는 Monitor 향 제품과 달리 Note 향 LCD 제품의 경우 액정의 유전율을 상승시켜 고속응답을 달성하고 있는데 이로 인해 Cst/Clc의 비율이 응답속도의 중요 인자로 작용하며 이에 최적 응답속도 달성을 위한 Cst/Clc 비율을 시뮬레이션 및 Test SPL 제작을 통해 제안하며 실제 pixel에 인가되는 Offset 전압에 의한 응답속도 유의차 및 Cusp 현상에 대해 논하였다

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.323.3-324
• /
• 2002

Histone deacetylases (HDAC) activity is associated generally with transcriptional repression. We have reported previously that apicidin. a histione deacetylase inhibitor. inhibited the proliferation of tumor cells via induction of p21 WAF/C1P1. We extended our study to identify the effect of apicidin on the expression of other cell cycle regulatory protein. such as cyclin E. a critical regulator of the transition from G1 into S phase. (omitted)

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.525-544
• /
• 2004

The Purpose of this study is to examine logistics characteristics related to electronic commerce and to suggest improvement of logistics Service in electronic commerce. This paper concerns the logistics functions which are essential for completing a commerce process even under the EC environment and provides ways to improve the logistics performance. Electronic commerce have introduced two scenes; dramatic change of the existing distribution surroundings and noticeable achievement of the economic advance and social efficiency. But, in the same scene, electronic commerce can be a threat to business condition, especially logistics management. It suggests that for activation of EC it is necessary to strengthen the strategic alliances, introduce GPS and use the third party logistics positively to prepare for the settlements of traffic problems, support the introduction of integrated logistics service and logistics information system.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.1
• /
• pp.7-15
• /
• 2014

In the present study, a computational analysis of the flow in a centrifugal blower is carried out to predict a performance and to explain noise characteristics of the blower. Unsteady, 3D Navier-Stokes equations were solved with k-${\varepsilon}$ turbulence model using CFX software. CFD results were compared with the experimental data that is acquired from an experiment conducted with the same blower. The pressure fluctuation in the blower was transformed into the frequency domain by Fourier decomposition to find the relationship between flow behaviors and noise characteristics. Sound pressure level (SPL) which is obtained from wall pressure fluctuation at impeller outlet represents relative overall sound level of the blower well. Sound spectra show that there are some specific peak frequencies at each mass flow rate and it can be explained by flow pattern.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.36-41
• /
• 1998

The cross-flow fan performance and its sound noise characteristics are predicted by computational methods. The unsteady incompressible Navier-Stokes equations in moving coordinates are solved by a SMAC method on unstructured triangular meshes, using a sliding mesh technique at the interface between the domain rotating with blades and the rest stationary part. The computationally predicted fan performance was favorably compared with experiment, and some numerical aspects of simulating the cross-flow fan are discussed. With the computed unsteady flow field, aeroacoustic sound noise of the fan is predicted by the Lighthill-Curie equation. The unsteady surface pressure fluctuations on stabilizer enables a prediction of BPF noise of the uniform pitch blade fan quite accurately. The aeroacoustic sound noise characteristics of both uniform and random pitch blade fans are also examined by SPL spectrum analysis.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1043-1047
• /
• 2003

With the advancement of micro-systems and nanotechnology, the need for ultra-precision fabrication techniques has been steadily increasing. In this paper, a novel nano-structure fabrication process that is based on the fundamental understanding of nano-scale tribological interaction is introduced. The process, which is called Mechano-Chemical Scanning Probe Lithography (MC-SPL), has two steps, namely, mechanical scribing for the removal of a resist layer and selective chemical etching on the scribed regions. Organic monolayers are used as a resist material, since it is essential for the resist to be as thin as possible in order to fabricate more precise patterns and surface structures. The results show that high resolution patterns with sub-micrometer scale width can be fabricated on both silicon and various metal surfaces by using this technique.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.826-829
• /
• 2008

In a field measurement, measurement errors are produced by measuring environments and systematic errors in the measurement procedure. Measurement errors can be expressed as a measurement uncertainty. In this study, the measurement uncertainty and various measuring factors are investigated in heavy-weight impact sounds. According to KS 2810-2, the model functions, which is the estimation of the maximum SPL measurement in each octave band frequency, are determined. From this estimation model, 3.53dB is shown in 63Hz. This level is caused by the sound field of the receiving room, which does not meet the diffusing field.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.313-318
• /
• 1999

본 논문은 1997년 Haan과 Fricke이 발표한 논문1)에서 제시한 확산성의 중요성에 대한 조사에 기초하여 실제홀에서 표면확산성이 실내음향성능에 미치는 영향을 분석해 보았다. 실의 규모가 비슷하고 각기 확산성이 다근 3개의 홀을 선정하였으며, 두 개의 홀은 장방형 평면이며 한 개는 부채꼴평면을 가지고 있다. 각각의 홀에 대해서 한 개의 음원과 8개의 수음점을 설정하여 현장실험과 시뮬레이션을 수행하였고 RT와 SPL의 두 가지 음향평가요소를 사용하여 분석하였다. 분석결과 확산성이 좋을수록 잔향시간이 길어지고 음압레벨이 높아진다.