• Composites Research
• /
• 제26권2호
• /
• pp.123-128
• /
• 2013

PVDF(polyvinylidene fluoride) 섬유는 습식방사방법을 적용하여 제조하였다. PVDF 분자 내 압전 특성과 밀접한 관련을 갖는 ${\beta}$형태의 결정 함량을 높이기 위하여, 본 연구에서는 습식방사 된 섬유에 1단계 연신, 2단계 어닐링 공정으로 구성하여 후 처리를 도입하였다. 후 처리는 PVDF 고분자의 유리전이 온도($T_g$)와 용융온도($T_m$) 사이의 온도범위에서 진행하여, 최대의 ${\beta}$형태 결정을 생성 할 수 있는 열처리 조건을 최적화 하였다. 제조된 PVDF 섬유 내 분자 배향 특성과 결정 구조를 확인하기 위하여 적외선 분광 광도계(FT-IR)와 X선 회절 분석기(XRD)를 이용하여 분석하였으며, 전자현미경(SEM)을 통하여 섬유의 표면을 관찰하여 섬유의 평균직경을 확인하였다. 분석 결과, 후 처리 공정이 PVDF 결정 구조의 영향을 미치며, ${\beta}$형태의 결정 비율을 증가시킨다는 것을 확인하였다. 더불어 ${\beta}$형태 결정 향상으로 인해 기계적 강도가 증가되었으며, 압전 특성 향상까지 기대할 수 있었다.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.355-365
• /
• 2016

The improvement of fouling resistance of porous polymeric membrane is one of the most important targets in membrane preparation for water purification in many process like wastewater treatment. Membranes can be modified by various techniques, including the treatment of polymer material, blending of hydrophilic polymer into polymer solution, and post treatment of fabricated membrane. This research proposed the modifications of morphology and surface property of hydrophobic membrane by blending polyethersulfone (PES) with three polymeric additives, polyvinylpyrrolidone (PVP), Pluronic F127 (Plu), and Tetronic 1307 (Tet). PES hollow fiber membranes were fabricated via dry-wet spinning process by using a spinneret with inner and outer diameter of 0.7 and 1.0 mm, respectively. The morphology changes of PES blend membrane by those additives, as well as the change of performance in ultrafiltration module were comparatively observed. The surface structure of membranes was characterized by atomic force microscopy and Fourier transform infra red spectroscopy. The cross section morphology of PES blend hollow fiber membranes was investigated by scanning electron microscopy. The results showed that all polymeric additives blended in this system affected to improve the performances of PES membrane. The ultra-filtration experiment confirmed that PES-PVP membrane showed the best performance among the three membranes on the basis of filtration stability.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.399-405
• /
• 2007

The hyper-eutectic Mg-33.5%Ni alloy was rapidly solidified by melt spinning process. The melt-spun Mg-33.5%Ni has amorphous structure and crystallization occurred above $162^{\circ}C$. The hydriding and dehydriding rates of melt-spun Mg-33.5%Ni increased with cycle and high rate of hydrogen storage occurred at 3rd cycle. The maximum hydrogen amount absorbed in melt-spun Mg-33.5%Ni at $300^{\circ}C$ is about 4.5%.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.107-117
• /
• 2018

Nettle fiber, a sustainable fiber, was applied to the fabrication of denim to identify changes in textile appearance and formation. For the weaving of nettle denim, nine specimens, distinguished by three kinds of composite use of nettle fiber and three stages of fabrication processes, were used. The kinetic characteristics of the nine specimens were measured by the KES-FB system, and the images of the specimens of finished denim textiles, captured with a CCD Camera, were analyzed. In terms of the extensibility (EM) of nettle denim, all specimens showed post-processing increase, thereby suggesting an easy transformation of the textile as a source material for denim fabric. The effects of washing on the woven formation of denim were also identified. The geometric roughness (SMD), the problematic property of bast-fiber-like nettle fiber, was found to be decreased by washing. In terms of the bending rigidity (B) of the textile, the post-processing shrinking percentage of elastic nettle denim was found to decrease; all specimens that underwent bio-washing only also manifested that post-processing elasticity increased. To improve the draping of nettle denim, a mixed spinning together with washing were found to be advantageous. In terms of the shear stiffness (G), which is closely associated with the appearance of clothes, the formation of textile was improved regardless of the types of processing, including bio-washing and bleach washing.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• 멤브레인
• /
• 제26권2호
• /
• pp.87-96
• /
• 2016

세라믹 소재는 고분자 나노섬유 분리막과 비교하여 우수한 열안정성과 고투과 물성을 가짐으로써 지난 10여 년간 많은 주목을 이끌어왔다. 최근 들어 높은 다공도와 유량을 가지는 세라믹 섬유 분리막이 금속 산화물을 이용하여 주로 전기방사법에 의해 제조되어 왔는데, 이러한 세라믹 분리막의 제조 단가를 감소하며 성능을 향상시키기 위해 나노섬유의 선택층을 가지는 세라믹 분리막들이 전기방사 공정과 개질 과정을 통해 개발되었다. 본 리뷰에서는 최근 수년간 세라믹 섬유 분리막의 개발을 위한 연구 동향에 대하여 정리하였다.

• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.287-294
• /
• 2015

This study investigates the physical properties of Murata Vortex Spinning (MVS) blended yarn with yarn count(20's, 30's, 40's) and blend ratio(Polyester 100, Polyester70:Cotton30, Polyester50:Cotton50, Polyester30:Cotton70, and Polyester50:Tencel40:Cotton10). This study evaluated tenacity, elongation, bending rigidity, bending hysteresis, hairiness coefficient, irregularity and twist number. The structure of MVS blended yarn influenced stress, strain, bending rigidity, bending hysteresis and the hairiness coefficient of MVS blended yarn decreased as the yarn count increased. MVS blended yarn consists of core and sheath. The core of MVS blended yarn is composed of a parallel fiber with a wrapping fiber that covers thecore fiber. This special structure of the MVS blended yarn effects the physical properties of the yarn; in addition, the mechanical properties of the component fibers influenced the stress, strain, bending rigidity, bending hysteresis and hairiness coefficient of MVS blended yarn with the blend ratio. Polyester decreases and cotton increases resulted in decreased physical properties. A similar polyester content increased the tencel and physical properties. Appropriate physical properties and a variety of touch expression can be realized through a correct blend ratio.

• 한국표면공학회지
• /
• 제56권5호
• /
• pp.309-319
• /
• 2023

Non-woven fabric is a textile product made by spinning thermoplastic polymers without manufacturing processes such as stretching, doubling, twisting, weaving, and knitting to form a sheet-shaped web in which fibers are tangled with each other, and then combining them by mechanical and physical methods. In addition, the non-woven fabric manufacturing process has various raw material choices, high productivity, so it is a textile manufacturing technology that can have various uses and increase added value. This study was conducted to control the shape and physical properties of products by improving the manufacturing method of melt-blown non-woven fabrics using process technology that easily changes the shape of non-woven fabrics and improves mechanical properties. In particular, it is considered that a non-woven fabric with a thin material shape and improved mechanical properties will be easily applied to a continuous secondary battery manufacturing industry such as roll to roll operation.

• Composites Research
• /
• 제30권2호
• /
• pp.116-125
• /
• 2017

본 연구의 목적은 고온 산화성 분위기하에서 기계적물성이 우수한 탄화규소섬유(SiC Fiber)를 파일롯-규모로의 생산 제조공정을 개발하는 것이다. 프리세라믹 전구체로서 폴리카보실란(PCS)을 사용하여 탄화규소섬유를 제조하였다. 연속성의 PCS 섬유는 $300{\sim}350^{\circ}C$에서 PCS를 용융한 후에 용융방사로부터 얻었다. 열처리 전에 섬유의 불융화를 위하여 공기 분위기하에서 경화를하였다. 경화 전, 후에 측정한 FT-IR 스펙트라 피크로 부터 경화도를 계산하였다. 탄화규소섬유의 물성은 경화도에 따라 크게 영향을 받았다. 본 개발에서 열처리 중 섬유의 장력 조절로 우수한 물성을 갖는 탄화규소섬유를 얻었다. 탄화규소섬유의 화학조성과 기계적물성은 안정화섬유의 열처리시의 이송속도에 영향을 받았다. 탄화규소섬유를 공기분위기하 $1000^{\circ}C$에서 1분부터 50시간까지 노출한 후에 인장시험을 수행하였다. 그 결과 인장강도는 약 60%까지 감소함을 보여주었다. 장시간 노출시험시 낮은 인장 강도값을 나타내는 섬유는 화학성분 분석시 섬유의 표면에 많은 탄소량을 함유하고 있었다.

• 공업화학
• /
• 제20권5호
• /
• pp.479-485
• /
• 2009

본 연구에서는 triethanolamine-ester quaternary ammonium salt의 ASCO EQ85 양이온 계면활성제 시스템의 기본 물성을 측정하였으며, 제타 전위 측정 및 quartz crystal microbalance 실험을 통한 계면활성제 흡착량 측정으로부터 pH 조건에 따른섬유 유연력에 관하여 살펴보았다. ASCO EQ85 계면활성제의 CMC는 약 $3{\times}10^{-3}mol/L$이며, CMC에서의 표면장력은 약 40 mN/m이었다. $25^{\circ}C$에서 1 wt% 계면활성제 수용액과 n-dodecane 사이의 계면장력을 spinning drop tensiometer를 사용하여 pH에 따라 측정한 결과, pH 증가에 따라 계면장력은 약간 증가하였으나 평형에 도달하는 시간은 pH에 관계없이 거의 일정하였다. 계면활성제 흡착량은 농도에 비례하여 증가하는 경향을 보였으며, 수용액의 pH 조건에 따라 계면활성제 흡착량이 변화하였다. 계면활성제 수용액의 pH에 따라 유연력을 측정한 결과, pH 증가에 따라 양이온 계면활성제로 세정한 섬유의 마찰계수가 증가하였으며, 양이온 계면활성제 수용액의 pH가 산성 조건일 때 섬유의 유연 효과가 크다는 것을 확인할 수 있었다. 계면활성제 수용액의 거품 안정성을 측정한 결과, 수용액의 pH가 증가함에 따라 거품의 부피가 반으로 줄어드는데 걸리는 시간이 증가하고 거품 안정성이 증가하였다.