• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.189-191
• /
• 2006

This paper analyzes effect of the spinning vehicle on the GPS signal. In rapid spinning vehicles such as missiles and space rockets, carrier phase and frequency depend on the roll rate of the vehicle. It induces phase and frequency modulation caused by the roll rate. The modulated phase and frequency increase dynamic stress error of the tracking loop. Even though higher order tracking loop can remove dynamic stress error, the dynamic stress error can not be remove in this case. In order to analyze the effect of the spinning vehicle on the GPS signal, the experiments are carried out. The experiment results show the modulation of the carrier frequency and phase caused by the roll rate of the spinning vehicle.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권2호
• /
• pp.91-103
• /
• 2018

Conventional inertial measurement units cannot be used in the spinning vehicle with high rotation rate due to gyro's narrow operation range. By the way, angular acceleration can be measured using the accelerometer array distributed in the vehicle. This paper derives a mechanization for the gyro-free INS in the navigation frame, and proposes a gyro-free INS algorithm based on the derived mechanization. In addition, the proposed algorithm is used to estimate angular velocity, attitude, velocity, and position of a spinning vehicle with high rotation rate. A MATLAB-based software platform is configured in order to show validation of the proposed algorithm. The reference trajectory of a spinning vehicle at 3 round per second, 30 round per second are set up, and the outputs of accelerometer are generated when triads of accelerometer are located at the origin and all the axes. Navigation results of the proposed algorithm for the generated output are presented. The results show that the proposed navigation algorithm can be applied to the spinning vehicle with high rotation rate.

• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.405-417
• /
• 2023

This paper reveals theoretical research to the nonlinear dynamic response and initial geometric imperfections sensitivity of the spinning graphene platelets reinforced metal foams (GPLRMF) cylindrical shell under different boundary conditions in thermal environment. For the theoretical research, with the framework of von-Karman geometric nonlinearity, the GPLRMF cylindrical shell model which involves Coriolis acceleration and centrifugal acceleration caused by spinning motion is assumed to undergo large deformations. The coupled governing equations of motion are deduced using Euler-Lagrange principle and then solved by a combination of Galerkin's technique and modified Lindstedt Poincare (MLP) model. Furthermore, the impacts of a set of parameters including spinning velocity, initial geometric imperfections, temperature variation, weight fraction of GPLs, GPLs distribution pattern, porosity distribution pattern, porosity coefficient and external excitation amplitude on the nonlinear harmonic resonances of the spinning GPLRMF cylindrical shells are presented.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.615-621
• /
• 2009

Since GPS receivers and INS algorithms do not work properly in the spinning vehicles due to change of the GPS signal and excess of the measurement limitation of the gyroscope, conventional GPS/INS integrated navigation systems do not provide accurate navigation outputs. This paper proposes a design method for GPS/INS integrated navigation systems of spinning vehicles. A special GPS receiver with a signal tracking loop for changed GPS signal caused by spinning and an INS with a roll estimation method are configured and the conventional integration filter is combined. The proposed method was verified through comparison of the navigation results. The result of the proposed method for the spinning vehicle was similar to that of the conventional navigation system without spinning.

• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.325-335
• /
• 2023

The missile is affected by both spinning and axial motion during its movement, which will have a very adverse impact on the stability and reliability of the missile. This paper regards missiles as cylindrical shell structures with spinning and axial motion. In this article, the forced vibration of carbon nanotube-reinforced composites (CNTRCs) cylindrical shells with spinning motion and axial motion is investigated, in which the clamped-clamped and simply-simply supported boundary conditions are considered. The displacement field is described by the first-order shear theory, and the vibration equation is deduced by using the Euler-Lagrange equation, after dimensionless processing, the dimensionless equation of motion is obtained. The correctness of this paper is verified by comparing with the results of the existing literature, in which the simply-simply supported ends are taken into account. In the end, the effects of different parameters such as spinning velocity, axial velocity, carbon nanotube volume fraction, length thickness ratio and load position on the resonance behavior of cylindrical shells are given. It can be found that these parameters can significantly change the resonance of axially moving and rotating moving CNTRCs cylindrical shells.

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.64-71
• /
• 2015

스피닝 공정은 축대칭의 얇은 두께를 가지고 있는 속이 빈 실린더형 단면을 가지고 있는 부품에 일반적으로 사용된다. 전통적인 스피닝 제작 기술은 컨벤셔널 스피닝과 파워 스피닝(전단 스피닝과 유동성형)으로 구분된다. 액체추진로켓의 연소기의 재생냉각 챔버와 확대노즐부에서 적용된 스피닝에 대한 문헌조사를 수행하였다. 연소실과 노즐의 제작에 사용되는 스피닝은 대부분 맨드럴을 사용하였다. 최근에는 전통적인 냉간 스피닝에 비해 열간 스피닝도 많이 사용되고 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.387-390
• /
• 2006

스피닝은 가장적은 가공력과 간단한 도구를 이용하여 소재를 변형시키는 방법중의 하나이다. 그리고 소재의 소성변형으로 인해 기계적 특성의 향상을 가져오는 공법이다. 이러한 스피닝 공법은 자동차, 항공, 군사 분야에서 중요한 부품의 생산에 적용되는 기술이다. 본 연구에서는 발사체 연료탱크의 돔형상에 스피닝 공법을 적용하여 제작함에 있어 롤러의 이송속도와 소재의 두께감소에 따른 성형력의 경향을 유한요소 해석을 이용하여 분석하였다.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.689-694
• /
• 2008

This paper proposes a roll rate estimation method for spinning vehicles. The carrier phase and frequency variations caused by spinning of vehicles are observed and the roll rate estimator is designed on the observation. The roll rate estimator consists of phase detector and zero crossing counter. The phase detector computes phase variation using in-phase and quadrature value from the correlator. By using zero crossing counter, the roll rate can be estimated since the output of phase detector is changed in proportion to the roll rate. Experiment a results show that estimated roll rate error is smaller than 0.0578Hz.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.303-306
• /
• 2006

A roll rate estimation method is proposed using the GPS measurement for spinning vehicles such as guided munitions and smart bombs. Before designing the roll rate estimator, the carrier phase and the carrier frequency deviation caused by spinning have been observed. Based on the observation, the spinning frequency is estimated using I and Q value from the correlator. The proposed method is evaluated through computer simulations using a software defined receiver and a GPS IF signal generator.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.109-118
• /
• 2016

The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.