• 한국자기공명학회논문지
• /
• 제7권2호
• /
• pp.68-73
• /
• 2003

Proton magic angle spinning spectra and thermogravimetric analysis data of poly(vinyl butylal) with water in it indicate water contents in the poly(vinyl butylal) samples were reduced during magic angle spinning. Our observation implies that the centrifugal force on the samples due to magic angle spinning cannot be neglected, especially on inhomogeneous and soft samples like poly(vinyl butylal) we tested in this work.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.117-118
• /
• 2006

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.227-228
• /
• 2009

This study was performed to develop a new PET yarn having the new appearance and touch effect of polyester (PET) yarn, using spinning and texturing technologies. The spinning technology is the manufacturing technology resulting in the denier difference in yarn filaments, and the texturing technology is the texturing conditions leading to spun yarn effects, using the filaments from the spinning processing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.250-251
• /
• 2014

This paper investigates the stick-slip phenomena on spinning shaft. The modeling of the shaft is considered only torsional direction with nonlinear friction. The friction is adopted a negative friction-velocity slope. Based on the model, a nonlinear equation of motion is derived and analyze the stick-slip phenomena. In order to analyze the time dependent response, the nonlinear formulations are numerically solved by nonlinear Newmark method. The numerical results reveal the stick-slip phenomena on the spinning shaft system.

• 대한통합의학회지
• /
• 제12권1호
• /
• pp.83-96
• /
• 2024

Purpose : This study was conducted to determine the effects of a brain spinning program on cognitive function, body composition, health related fitness and physical self-efficacy of children and adolescents. Methods : This study, 34 children and adolescents were selected and divided into two groups : the exercise group (n=16), which received a brain spinning program and the control group (n=16), which did not receive any exercise program. The program was conducted for 30 minutes three times a week for 4 weeks, and the cognitive function, body composition, health related fitness and physical self-efficacy were measured both before and after the program. Results : The exercise group, which received a brain spinning program showed a significant increase in short-term memory (p<.05) and working memory (p<.01), and muscle mass increased significantly only in the exercise group (p<.05). In addition, left grip strength increased in the exercise group (p<.01), and the maximum oxygen intake decreased significantly only in the control group (p<.05), and Sit-forward bend increased significantly only in the exercise group (p<.01). Physical self-efficacy significantly increased only in the exercise group (p<.05). Conclusion : In summary, short-term memory, cognitive efficiency, working memory, muscle mass, left grip strength, maximum oxygen intake, and left forward bending in children and adolescents significantly increased after the 4-week brain spinning program. However, the control group that was not provided with the 4-week brain spinning program showed a significant increase in body weight and a significant decrease in maximum oxygen intake. In conclusion, the 4-week brain spinning program has positive effects on short-term memory, cognitive function, muscle mass, muscle strength, cardiorespiratory endurance, flexibility, and physical self-efficacy.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.24-32
• /
• 1998

Drawn polyethylene was studied by 13C cross polarization magic angle spinning techniques. Solid-solid phase transition from orthorhombic to monoclinic crystalline phase by drawing was observed. In addition, using a synchronized magic angle spinning 2 dimension technique, we confirmed that macroscopic ordering of the polyethylene was produced by drawing.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.420-423
• /
• 2006

Spandex has been successfully applied on modified worsted spinning system to produce spandex core spun yam. However it's difficult to produce wool/spandex core-spun yam on woolen spinning system with the same modified device because the drafting device of the two systems is quite different. A new method is introduced to apply spandex on woolen spinning system in this paper. Core-spun yam produced in this way has good appearance and quality by comparing with normal yam. A series of experiments were carried out to study the influence of spandex drafting ratio and yam twist factor on tensile' properties and elasticity of core-spun yams. The results indicate that core-spun yam with spandex drawing ratio of 2.5 and twist factor of 13.63 has highest value of tenacity and breaking elongation.

• 한국염색가공학회지
• /
• 제8권6호
• /
• pp.33-39
• /
• 1996

The purpose of this study was to investigate the structural characteristics, mechanical properties, and stress-relaxation behavior of PET filament, which were prepared at various spinning speeds(1650, 3300, 4500, 5000, 5500, and 6000 m/min) and anneal(12$0^{\circ}C$, 20 min & 15$0^{\circ}C$, 40 min). In 4500 m/min of spinning speed the crystallinity, crystallite size, and degree of orientation of PET filament rapidly increased. By increasing spinning speed, the temperature dependence of stress-relaxation sharply decreased. Same results were obtained from heat-treated samples. As a result, activation energy for stress-relaxation increased with the crystallinity and spinning speed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2001

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.7-15
• /
• 2003

스피닝 로터 게이지는 표준기관의 고진공 국제비교에 전달표준기로 상용되고 있으며, 고진공 국가표준기인 동적교정장치를 이용하여 스피닝 로터 게이지를 교정하였다. 교정 결과의 불확도를 국제표준화기구에서 권고한 A형 불확도, B형 불확도, 합성표준불확도, 확장불확도 등으로 구분하여 평가하는 방법을 제시하였다. 이 방법에 따라 평가한 스피닝 로터 게이지의 합성표준불확도는 $1.8007\times10^{-5}$ Pa ~$4.8422\times10^{-5}$ Pa 이었다.