• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.223-226
• /
• 2006

Computational Study of a sphere subjected to free stream flow and simultaneously subjected to spinning motion is carried out. Three dimensional compressible Navier-Stokes equations are solved using fully implicit finite volume scheme. SST(Shear Stress Transport) $k-{\omega}$ turbulence model is used. Aerodynamic characteristics being affected are studied. Validation of the numerical process is done for the no spin condition. Variation of drag coefficient and shock wave strength with increase in spinning rate is reported. Changes in the wake region of the sphere with respect to spinning speed are also observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.695-700
• /
• 2000

The dynamic stability of spinning beam with free boundary conditions for both edges subjected to a tip follower force $P_0+P_1cos{\Omega}t$ is analyzed. It is studied that the beam has a concentrated mass. and then the effects of the axial locations of the mass are studied. The beam is modelled with the Timoshenko type shear deformations. The Hamilton's principle is used to derive the equations of motion, and the critical spinning speed of a beam subjected to a follower force with various non-dimensional parameters is investigated. The finite elements are used with $C^0$ continuity to analyze the spinning beam model, and the method of multiple scales is tried to investigate the dynamic instability regions. The governing equations of motion involve periodic coefficients, which are not in the form of standard Mathieu-Hill equations. The result shows that the concentrated mass increases the dynamic stability of the spinning free-free beam subjected to a thrust.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.596-602
• /
• 2006

The effect of high-temperature spinning and poly(vinyl pyrrolidone) (PVP) additive on poly(vinylidene fluoride) (PVDF) hollow fiber membranes was investigated using differential scanning calorimetry, X-ray diffraction measurement, and scanning electron microscopy, together with the corresponding microfiltration performances such as water flux, rejection rate, and elongational strength. Using high-temperature spinning, porous hollow fiber membranes with particulate morphology were prepared through PVDF crystallization. The particulate structure of the membranes was further modified by the addition of miscible PVP with PVDF. Due to these effects, the rejection rate and strength of the fibers were increased at the expense of reduced water flux and mean pore size, which indicates that high-temperature spinning and PVP addition are vary effective to control the morphology of PVDF hollow fiber membranes for microfiltration.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.355-361
• /
• 2008

In highly stressed machine elements such as angular contact ball bearings and toroidal type traction drives, the elastohydrodynamic lubrication of elliptical contacts with both rolling and spinning motion are occur. In this paper, a finite difference method with non-uniform grid systems and the Newton-Raphson method are applied to solve the problems. Pressure distributions, film contours and variations of the minimum and central film thicknesses are compared with various ellipticity parameter, dimensionless speed and load parameter. The results showed that the spinning motion has significant influence especially on the film shapes. Reduction of the minimum film thickness under spinning is remarkable whereas the central film thickness is relatively less. Especially variations of the minimum film thicknesses with rolling velocity, load and ellipticity ratio are a great different from those of pure rolling. Therefore present numerical scheme can be used in the analysis of general elliptical contact EHL problems and further studies are required.

• Transactions of Materials Processing
• /
• v.20 no.6
• /
• pp.432-438
• /
• 2011

A method for estimating the shear spinnability is suggested, and it was applied to sheets of Ti-6Al-4V alloy for estimation of shear spinnability at hot working temperature. The effective working temperature was $850^{\circ}C$ or above. The hot spinning operation was carried out in two steps of shear spinning. The reduction of thickness at the first step was 50% and 45% at the second, and the overall reduction of thickness was 72.4%. The cone spinning process could produce a uniform wall thickness with only a few percent tolerance, proving itself appropriate for making cones of Ti-6Al-4V alloy with uniform wall thickness.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• 전기의세계
• /
• v.24 no.5
• /
• pp.97-102
• /
• 1975

This paper describes the result of a Study for the Optimum Operating method with Spinning reserve in case of outage of large generator unit to improve the system stability and prevent the system frequency drop. This is usually done by governor free operation, so we focused our attention to the operating Char acteristics of spinning reserve. Nexy, a study was made to mesure the upper limit of Spinning reserve and when this upper limit cannot match the required power, a relationship between the amount of spinning reserve and that of the load shedding requirement was searched with regard to several system operating conditions to use it in our future system operation. By this study, the optimum system operating method was recommended for reliable operation of power system.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.662-666
• /
• 2007

Poly(vinyl butyral) (PVB) with different wt% water was studied gravimetrically as well as with 1H magic angle spinning (MAS) nuclear magnetic resonance (NMR). The composition of PVB samples changes during MAS NMR because of the centrifugal force. As MAS time progresses, initially free water was removed fast but bound water also was gradually depleted. More water was diminished at faster spinning speeds, longer spinning time, higher temperatures, and higher initial water contents. As water in PVB was reduced, the chemical shifts and line widths of different types of water and also those of PVB changed. Our results demonstrate that 1H MAS NMR carried out at 10 kHz in less than about 5 minutes is a convenient and sensitive technique to measure: (a) the content variations of different types of water in polymers, (b) the degree of the interaction of water and polymer, and (c) the molecular dynamics of the polymer. Our study can be extended to different soft polymers with other small molecules than water in them.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.1-6
• /
• 2017

Total capacity of pumped hydro storage(PHS) in Korean power system reaches 4,700MW, though the share of it is about 4.56% of total capacity The Unit Commitment program, E-terracommit which is used for the operational purpose by KPX, includes the PHS model. But the model has a defect that it does not include the information of water level of upper reservoir. Therefore two types of improved the PHS models are represented in this paper. The first model is a optimized model by connecting the upper reservoir water level to the non-spinning reserve. The other model is to have priority allocate both the PHS and combined cycle generator for non-spinning reserve. The proposed two models and the E-terracommit model is compared and resulting to have improvement in estimating non-spinning reserve when using the proposed models.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2007

The shear spinning has been used to produce thin angled cone of parts, with reduced forming force and enhanced mechanical and surface quality for a good finished part, compared with other method formed parts. So shear spinning technique is used widely in industrial production. Especially shear spinning and flow forming techniques are used frequently in automotive, aerial, defense industry. In this paper, finite element method analysis of shear spinning for a cone shape workpiece is carried out to study effects of forming depth and lead angle on forming force. The axial and radial forces on several forming depth and lead angle conditions are obtained.