• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.231-238
• /
• 2002

미세 절삭에 의한 마이크로 형상가공 및 이를 이용한 미세금형 가공기술개발을 위하여 절삭 공구를 이용한 기계적 미세 가공법에 대한 고찰과 더불어 shaping, end-milling, drilling 등의 가공이 가능한 기계적 미세 가공시스템을 구성하고 이를 이용한 미세 치형 그루브와 미세 격벽 등 미세 형상 구조의 금형 개발을 위한 가공실험을 수행하였다. 본 실험에서는 먼저 shaping 방식으로 세 종류의 다이아몬드 바이트를 사용하여 알루미늄, PMMA, Nickel, 황동 등의 소재에 pitch $150{\mu}m$, 높이 $8{\mu}m$ 내외의 미세 치형의 금형 코어를 가공하였고, 다음으로 Z축에 air spindle을 설치하여 $\phi0.2mm$의 end-mill(WC)을 사용하여 황동 소재에 깊이 $200{\mu}m$, 폭 $200{\mu}m,\;100{\mu}m,\;50{\mu}m,\;30{\mu}m$의 두께 변화를 주어 미세 격벽에 대한 가공실험을 하였다. 미세 구멍가공실험으로는 drilling 전용장비를 구성하여 $\phi0.6\~0.15mm$의 drill공구로 SM45C와 세라믹$(Si_3N_4-BN)$ 소재에 스텝이송방식에 의한 미세 구멍 가공 실험을 실시하였다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.146-154
• /
• 2005

Recently, the high-speed and intelligence technology of machine tools are developed for the high efficiency of productivity Under the operating condition from the high-speed of machine tools, the various failure modes can occur in core units of manufacturing system. Therefore it is for the reliability concept of machine tool to be required in a design level. And the above-stated technology must be accommodated in the feeding and spindle subsystem, etc those are the core units of machine tools. In this study, we are developed the test-bed of sliding cover (C-plate) in order to evaluating reliability and estimating failure modes of feeding subsystem under operating conditions. The reliability experiment using the developed test-bed and the additional structural analysis executed on single and double structure. We found out the weak parts of sliding cover and were able to predict a life cycle from the experiment results. In this study, we propose the new C-plate model with double link structure to apply the high-speed machine tool in the fundamental guideline.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.26-31
• /
• 2002

본 연구는 초고속 지능형 라인센터 개발에 관한 것으로서 1 차 년도 볼 스크류 방식의 시험모델에 대한 종합 검토 결과를 바탕으로 2 차 연도에는 리니어 모터를 채택한 라인센터의 시제품 설계에 있어서 고속화를 위한 방안을 모색하고 컴팩트한 경량의 구조를 지향하는 라인 센터 구조물을 설계하였고, 3 차 년도에는 라인센터의 제작 및 종합적인 시험 평가를 통하여 상품화 모델을 정립하고자 하였다.

• 대한통합의학회지
• /
• 제8권3호
• /
• pp.53-62
• /
• 2020

Purpose :Periodontal ligament stem cells maintain tissue homeostasis in periodontal ligament. The purpose of this study was to determine the characteristics of periodontal ligament stem cells isolated from premolar teeth and observe protective effects against oxidative damage caused by Triethylene glycol dimethacrylate (TEGDMA) following treatment with N-acetylsysteine amide (NACA) drug known as enzymatic antioxidants. Methods : Primary periodontal ligament stem cell (PDSC) culture was performed from simply extracted human premolar of orthodontic patients. The characteristics of the primary cultured PDSCs was analyzed using the FACS system. PDSCs was incubated with TEGDMA and NACA. The cell proliferation and survival was determined using WST-1 assay. Collected data were analyzed using SPSS Window 20. Results : Primary cultured PDSCs grow on the floor and develop rapidly in a cluster form from up to 14 days. The morphology of PDSCs showed the spindle-shaped cells and grew directionally. FACS analysis, In addition, positive expression of visible cells were observed in mesenchymal stem cell biomarkers. PDLSCs cell viability was significantly decreased at high concentration in both 3 and 6 hours after TEGDMA treatment. We observed a decrease in the number of cells as well as a morphological change of PDLSCs. Antioxidative effect was notable since the death of PDLSC death was significantly inhibited compared to the control group at 24 and 48 hours after NACA treatment. Conclusion : Therefore, based on the results of this study, further research should be encouraged considering the development of clinical treatment methods using various antioxidants as well as regenerative engineering techniques utilizing periodontal ligament stem cells.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.1-7
• /
• 1988

본 연구에서는 컬럼모델을 보울트로 고정할 때 접합면에 알루미늄판, 황동판, 스테인리스판 등을 삽입하고 정적강성과 동적특성을 검토하여 이것을 기초로 공작물- 주축대-공구로 형성되고 있는 사이클중에서 선반의 주축대와 베드를 연결하는 결합부에 모델실험을 사용한 게재물을 삽입하고 선반구축계의 동적특성을 검토하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권6호
• /
• pp.484-487
• /
• 2002

Leiomyoma is a benign smooth muscle tumor that usually arise in the uterus, skin and gastrointestinal system. Only 2 percent are located in the head and neck. Leiomyomas of oral cavity are uncommon as only two cases have been reported in the Korean literature. The common location of oral cavity has been tongue, but other sites include buccal mucosa, lips, palate. mouth floor, and gingiva. Our patient was 30 years old female who complained of swelling and discomfort in the mouth floor. Microscopically this tumor showed bundles of intertwining spindle cells within fibrous connective tissue stroma. The nuclei were generally pale staining and blunt ended. Masson's trichrome stain was positive for muscle, and immunohistochemical study for ${\alpha}$-smooth muscle actin revealed strong positivity. It was treated by surgical excision. We experienced a case of leiomyoma of oral cavity, so we report with literature reviews

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.352-357
• /
• 1996

Recently, Permanent Magnet Synchronous Motor(PMSM) drives are widely used for industrial applications due to its high efficiency and high power factor control strategy. PMSM generally have two classifications such as the SPMSM(Surface Permanent Magnet Synchronous Motors) and IPMSM(Inter Permanent Magnet Synchronous Motors). IPMSA has economical merits over SPMSM in higher speed range, mechanical robustness, and higher power rate by the geometric difference. The maximum torque operation in IPMSM is realized by the current angle control which is to utilize additional reluctance torque due to a rotor saliency. In traction, spindle and compressor drives, constant power operation with higher speed range are desirable. This is simply achieved in the DC motor drives by the reduction of the field current as the speed is increased. However, in the PMSM, direct control of the magnet flux is not available. The airgap flux can be weakened by the appropriate current angle control to demagnetize. In this paper, the control method of optimal current vector in IPMSM is described in order to obtain the maximum torque or maximum output with the speed and load variations. The applied algorithm is realized by the proto system with torque and speed control Experimental results show this approach is satisfied for the high performance servo applications. (author). 6 refs., 9 figs., 1 tab.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 2010

An integrated machining center is developed for high precision and productivity manufacturing. The developed machine is composed of the high precision spindle using ball bearings, the high stiffness bed and the three axis CNC controller with the high resolution AC servo motor. In this paper, structural and modal analysis for the developed machine are carried out to check the design criteria of machine. The analysis is carried out by FEM simulation with using the commercial software, CATIA V5, ANSYS and ARMD. The simulation model of machine is made by shell and solid finite elements. This study also presents the measurement system on the modal analysis of an integrated machining center. The weak part of the machine is found by the analytical evaluation. The results provide with the structural modification data for good dynamic behaviors. And the safety of machine is confirmed by the modal analysis of modified machine design. As this study results can be trustworthy with the analysis of ANSYS and CATIA, integrated machining center can be successfully developed.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.159-166
• /
• 2005

A self-compensated water-hydrostatic bearing is well known to have advantages in stiffness. In this paper, its concept is extended to a hydrostatic journal bearing for achieving higher stiffness. The finite element method is applied to analyze the load characteristics of the self-compensated hydrostatic journal bearing. The analysis results reveal that the self-compensated journal bearing has higher load capacity and higher stiffness than conventional, fixed capillary journal bearings. and that this benefit degrades in the case of high eccentricity. Thus, a spindle system with self-compensated journal bearings must be designed to ensure a sufficiently large load capacity. A rectangular type capillary is also introduced with consideration of the practical application of the self-compensated hydrostatic journal bearing. Theoretical analysis results show that the rectangular type capillary is more beneficial than conventional annular type capillaries in practical use. The experimental verification on the analysis method is made to show that the experimental results are in good agreement with theoretical results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.370-374
• /
• 2005

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used fur aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, in many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor fur 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.