• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.72-81
• /
• 2014

Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site, forestry, farming, and daily life. The objective of this study was to compare one-hand lowering activity to lifting activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level with two workload 7.5kg and 15.0kg. Eight male subjects with LMM were asked to perform lifting/lowering tasks using both a one-handed (left-hand and right-hand) as well as a two-handed technique. Spinal loading was estimated through an EMG-assisted free-dynamic biomechanical model. The biomechanical stress of one-hand lowering activity was shown to be 43% lower than that of one-hand lifting activity. It was claimed that the biomechanical stress for one-hand lifting/lowering activity is almost twice (194%) of the one for two-hands lifting/lowering activity. It was also found that biomechanical stress by one-hand lowering/lifting activity with the half workload of two-hands lowering/lifting activity was greater than that of the two-hands lowering/lifting activity. Therefore, it might be a risk to consider the RWL of one-hand lowering/lifting activity to simply be a half of the RWL of two-hands lowering/lifting activity recommended by NIOSH.

• 국제물리치료학회지
• /
• 제9권4호
• /
• pp.1683-1686
• /
• 2018

Low back pain (LBP) is the most common reason for seeking physical therapy (PT) care. Recent studies suggest that axial loading can have a positive impact on the intervertebral disc by improving its tensile strength. Further, whole body vibration (WBV) appears to improve spinal muscle relaxation. Therefore, this case study describes the use of axial loading using a mini-trampoline in a female with chronic LBP. This case report is a single subject design. This patient is a 29-year-old female with a six-month history of low back pain following a motor vehicle accident. MRI found herniated discs at L4 and L5, clinical tests were positive for pain in the L4 and L5 dermatome and myotome the slump test was positive for neural tension, and LBP was constant at 4-6/10 over the past four months. She received axial loading exercises using a mini-trampoline and performed six sessions that were, scheduled twice a week for three weeks. Her Oswestry Disability Index (ODI) score improved from 40% at the time of her first visit to 22% at her final visit. Pain measure on the Numeric Pain Rating Scale (NPRS) after the first treatment was 7/10, and her pain after the final treatment was 0/10. These changes in the pain scores are clinically significant and exceed the minimal clinically important difference (MCID). This patient had a significant improvement in her pain using the NPRS and the ODI. This case study suggests that axial loading may be an effective treatment for some individuals with discogenic chronic low back pain.

• International Journal of Oral Biology
• /
• 제38권1호
• /
• pp.5-12
• /
• 2013

Recent studies indicate that reactive oxygen species (ROS) can act as modulators of neuronal activity, and are critically involved in persistent pain primarily through spinal mechanisms. In this study, we investigated the effects of NaOCl, a ROS donor, on neuronal excitability and the intracellular calcium concentration ($[Ca^{2+}]_i$) in spinal substantia gelatinosa (SG) neurons. In current clamp conditions, the application of NaOCl caused a membrane depolarization, which was inhibited by pretreatment with phenyl-N-tert-buthylnitrone (PBN), a ROS scavenger. The NaOCl-induced depolarization was not blocked however by pretreatment with dithiothreitol, a sulfhydryl-reducing agent. Confocal scanning laser microscopy was used to confirm whether NaOCl increases the intracellular ROS level. ROS-induced fluorescence intensity was found to be increased during perfusion of NaOCl after the loading of 2',7'-dichlorofluorescin diacetate ($H_2DCF$-DA). NaOCl-induced depolarization was not blocked by pretreatment with external $Ca^{2+}$ free solution or by the addition of nifedifine. However, when slices were pretreated with the $Ca^{2+}$ ATPase inhibitor thapsigargin, NaOCl failed to induce membrane depolarization. In a calcium imaging technique using the $Ca^{2+}$-sensitive fluorescence dye fura-2, the $[Ca^{2+}]_i$ was found to be increased by NaOCl. These results indicate that NaOCl activates the excitability of SG neurons via the modulation of the intracellular calcium concentration, and suggest that ROS induces nociception through a central sensitization.

• Journal of Korean Neurosurgical Society
• /
• 제59권5호
• /
• pp.425-429
• /
• 2016

Objective : Rod-screw fixation systems are widely used for spinal instrumentation. Although many biomechanical studies on rod-screw systems have been carried out, but the effects of rod contouring on the construct strength is still not very well defined in the literature. This work examines the mechanical impact of straight, $20^{\circ}$ kyphotic, and $20^{\circ}$ lordotic rod contouring on rod-screw fixation systems, by forming a corpectomy model. Methods : The corpectomy groups were prepared using ultra-high molecular weight polyethylene samples. Non-destructive loads were applied during flexion/extension and torsion testing. Spine-loading conditions were simulated by load subjections of 100 N with a velocity of $5mm\;min^{-1}$, to ensure 8.4-Nm moment. For torsional loading, the corpectomy models were subjected to rotational displacement of $0.5^{\circ}\;s^{-1}$ to an end point of $5.0^{\circ}$, in a torsion testing machine. Results : Under both flexion and extension loading conditions the stiffness values for the lordotic rod-screw system were the highest. Under torsional loading conditions, the lordotic rod-screw system exhibited the highest torsional rigidity. Conclusion : We concluded that the lordotic rod-screw system was the most rigid among the systems tested and the risk of rod and screw failure is much higher in the kyphotic rod-screw systems. Further biomechanical studies should be attempted to compare between different rod kyphotic angles to minimize the kyphotic rod failure rate and to offer a more stable and rigid rod-screw construct models for surgical application in the kyphotic vertebrae.

• 대한의용생체공학회:의공학회지
• /
• 제25권3호
• /
• pp.171-182
• /
• 2004

본 연구에서는 의료 영상과 유한요소 해석을 이용하여 골절된 척추체의 치료를 위해 골 시멘트를 주입하는 추체 성형술(vertebroplasty)에 영향을 미치는 여러 인자들에 대해 생체 역학적으로 분석하여 평가하고자 하였다. 의료 영상을 통해 구현된 모델들은 분석하고자 하는 인자에 대하여 크게 단분절과 다분절 유한요소 모델의 2 가지 형태로 구분하였다. 단분절 유한요소 모델을 통해 골다공증의 정도, 주입된 골 시멘트의 양, 골 시멘트의 주입량 및 환자에게 주입된 골 시멘트 양의 적절성을 평가하였으며, 골 시멘트의 주입이 척추체의 구조적 안정성에 미치는 효과를 분석하기 위하여 척추체 상종판에 수직 압축하중을 가하여 이때의 최대 수진 변위량을 분석하였다. 또한 단분절 척추체의 강성도(stiffness) 값을 산출한 뒤, 정상 상태의 척추체의 강성도 값으로 정규화 하였다. 다분절 유한요소 모델의 경우, 압박 골절 상태를 적용하여 척추 만곡의 변화가 인체에 미치는 영향을 분석하기 위하여 골절의 정도를 3 가지로 구현하였으며, 모델의 최상부에 압축 하중을 가한 후의 척추 만곡의 변화 정도를 분석하였다. 추체 성형술에 대한 다양한 인자들에 대한 분석 결과, 추체 성형술을 통해 환자의 골밀도가 상대적으로 높은 경우(BMD 50mg/$m\ell$이상)와 환자의 척추체 망상골 부피의 약 15%에 해당하는 골 시멘트 주입 시 가장 큰 척추체의 구조적 안정성의 증가 효과를 가져올 것으로 예측되었다. 또한 척추 골절이 미치는 영향에 대한 분석 결과, -2.8$^{\circ}$의 정상적인 후만곡을 가지는 T12∼L2 운동 분절이 골절의 모델링 후 약 9∼17$^{\circ}$의 큰 전만곡을 가지게 되었으며 이러한 척추 만곡의 변화는 동일한 하중 하에서 급격한 척추 만곡의 변화를 야기하는 것으로 나타났다. 또한 골절의 정도가 심할수록 척추 변형은 더욱 크게 증가하는 것으로 나타났다. 이러한 연구 결과들로부터, 전반적으로 추체 성형술은 골 시멘트의 주입량 또는 골밀도에 상관없이 약화된 척추체의 자체의 구조적 안정성의 증가 효과를 가져왔으며 골절로 인해 추체의 높이가 손상되었을 경우 이를 회복하는 것이 중요한 인자의 하나임을 나타내는 결과로 사료되어진다.

• The Journal of Korean Physical Therapy
• /
• 제22권4호
• /
• pp.15-20
• /
• 2010

Purpose: The purpose of this study was to measure changes in the H-reflex and V wave under loading conditions (e.g. prone and standing position) and to investigate whether postural change would affect the H-reflex and V wave in post stroke hemiplegic patients. Methods: Thirty persons with hemiplegia resulting from stroke (20 males, 10 females) participated in this study. Electromyography (EMG) was used to electrically stimulate and record the soleus H-reflexes and V waves under various loading conditions. The normality of the distribution of each variable (H latency, $H_{max}/M_{max}$ ratio, $V_{max}/M_{max}$ ratio) was tested using the Kolmogorov-Smirnov test. The means of normally distributed continuous data were assessed by independent t-test (${\alpha}$=0.05). Results: There were statistically significant differences in $H_{max}/M_{max}$ ratio (p<0.01), $V_{max}/M_{max}$ ratio (p<0.01), H latency (p<0.01) among the prone and standing position. Conclusion: We found that the H-reflex and V wave in standing position was more active to weight bearing load than prone position.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.515-516
• /
• 2006

The goal of total disc replacement is to restore pain-free mobility to a diseased functional spinal unit, by replacing the degenerated disc with a mobile bearing prosthesis. SB Charite III is named commercial product as the Artificial Intervertebral Disc (AID). SB Charite III consists of sliding core and endplate made by Ultra-high Molecular Weight Polyethylene (UHMWPE) and cobalt chrome alloy, respectively. To evaluate the effect of von-Mises stress in AID, and three-dimensional finite element model of AID analysis was preformed for four different loading types of sliding core. Consequently, endplate was compared with a compressive preload at 400N and flexion moment at $3{\sim}9Nm4. Therefore, this research has obtained result that von-Mises stress of sliding core in AID disc by radius curvature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1059-1061
• /
• 2002

A FE model is to develop a personalized biomechanical model of the scoliotic spine that will allow the design of clinical test providing optimal estimation of the post-operation results. A flexible multi-body model of the spine including rib cage, clavicle, and scapular was developed to simulate several mobility simulations. Vertebrae, clavicle and scapular were represented using rigid bodies and ribs and sternum were modeled as flexible bodies. Kinematical Joints and spring elements were used to represent the intervertebral disc and ligaments respectively. Postero-anterior and lateral radiographics of a scoliotic spine were used to represent a 3D reconstruction. CT data for same patient were also used to verify vertebrae rotation driven from postero-anterior and lateral radiographic images. Simulated results showed good reducibility almost uniformly distributed along the spinal segments. It was also found that boundary and loading conditions, required to mimic the operation procedures, were proven to be very sensitive parameters to its results rather than its mechanical properties

• 한국산업정보학회논문지
• /
• 제5권2호
• /
• pp.1-8
• /
• 2000

인력물자취급(MMH)작업은 작업현장에서 육체적 상해와 요통(LBP)을 발생시키는 주요 원인 중에 하나이며 이러한 산업재해는 점점 증가하고 있는 실정이다. 특히 좋지 않은 작업환경 즉, 비탈진 경사면에 위치한 농장이나 과수원, 항만부두의 하역작업, 경사진 벌목장 작업, 광산의 막장에서의 작업은 많은 재해의 위험성을 초래하며, 신체균형의 상실은 근골격계(musculoskeletal System)의 부상을 초래하게 된다. 본 연구는 경사면에서의 들기작업시 작업자의 근육의 force information과 근피로도를 측정하기 위해 EMG 시스템을 이용하였다. 측정결과 AEMG의 경우 모든 조건에서 일반적으로 multifidus 근육에 걸리는 부하가 다른 근육에서보다 많은 것으로 나타났고, 15$^{\circ}$, 20$^{\circ}$인 경우 neck extensors의 사용이 많은 것으로 나타났다. MPF천이 결과 공통적으로 multifidus부위 근육의 천이정도가 가장 많은 것으로 나타났다. 근육별 부하(%)에 대한 결과는 deep spinal 근육인 multifidus, erectorspinae부위가 상대적으로 많은 것으로 나타났고 neck extensor부위는 근육분담이 적은 것으로 나타났다.

• 대한인간공학회지
• /
• 제19권2호
• /
• pp.87-99
• /
• 2000

This study aims to examine a fuzzy logic-based human expert EMG prediction model (FLHEPM) for predicting electromyographic responses of trunk muscles due to manual lifting based on two task (control) variables. The FLHEPM utilizes two variables as inputs and ten muscle activities as outputs. As the results, the lifting task variables could be represented with the fuzzy membership functions. This provides flexibility to combine different scales of model variables in order to design the EMG prediction system. In model development, it was possible to generate the initial fuzzy rules using the neural network, but not all the rules were appropriate (87% correct ratio). With regard to the model precision, the EMG signals could be predicted with reasonable accuracy that the model shows mean absolute error of 8.43% ranging from 4.97% to 13.16% and mean absolute difference of 6.4% ranging from 2.88% to 11.59%. However, the model prediction accuracy is limited by use of only two task variables which were available for this study (out of five proposed task variables). Ultimately, the neuro-fuzzy approach utilizing all five variables to predict either the EMG activities or the spinal loading due to dynamic lifting tasks should be developed.