• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.228-232
• /
• 2005

This paper presents the efforts of the studies for improvement of spin characteristics of KTX-1 #02 through rotary balance test, forced oscillation test and spin mode analysis. During the full scale development design stage, we had fullfilled a lot of spin flight test, spin mode analysis. Based on all of the efforts, KTX-1 had been developed as a successful trainer with excellent spin characteristics.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.144-151
• /
• 2005

Spin coater is regarded as a major module rotating at high speed to be used build up polymer resin thin film layer fur bonding process of GaAs wafer. This module is consisted of spin unit for spreading uniformly, align device, resin spreading nozzle and et. al. Specially, spin unit which is a component of module can cause to vibrate and finally affect to the uniformity of polymer resin film layer. For the stability prediction of rotation velocity and uniformity of polymer resin film layer, it is very important to understand the dynamic characteristics of assembled spin coater module and the dynamic response mode resulted from rotation behavior of spin chuck. In this paper, stress concentration mode and the deformed shape of spin chuck generated due to angular acceleration process are presented using analytical method for evaluation of structural safety according to the revolution speed variation of spin unit. And also, deformation form of GaAs wafer due to dynamic behavior of spin chuck is presented fur the comparison of former simulated results.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.23-23
• /
• 2011

• 한국자기공명학회논문지
• /
• 제10권1호
• /
• pp.59-73
• /
• 2006

Spin-lattice relaxation pathway of $CH_2$ spin system by two dimensional NOESY sequence has been discussed. Two-dimensional spectra governed by dipolar relaxation mechanism were simulated in term of transfer mode, the generalization of conventionally used magnetization mode in one dimension. The transfer matrix directly related to the Redfield relaxation matrix can be constructed by the multiplet of transfer mode. The observable relaxation transfer modes causes to variation of the off-diagonal signal intensity of phase sensitive NOESY spectra from which variable spectral density can be extracted with simple group theoretical calculation. The variation of the J-coupling peak intensity as a function of the mixing time in 2-D spectra for $n-Undecane-5-^{13}C$ and Bromoacetic $2-^{13}C$ acid has been theoretically traced.

• 전자공학회논문지CI
• /
• 제47권1호
• /
• pp.30-40
• /
• 2010

IPTV 셋톱박스에서 가장 많이 사용하는 저장장치인 하드디스크는 가격에 비해 저장용량이 크고 입출력 속도가 빠르지만 스핀들 모터의 기계적 동작으로 인해 전력 소모가 많다는 단점이 있다. 셋톱박스에서 스트리밍 데이터를 재생하기 위하여 하드디스크의 스핀들 모터는 최대 전력을 사용하는 활성모드를 계속 유지해야 한다. 본 논문에서는 스트리밍 데이터 재생 시 전력 소모를 감소시키는 오프셋-버퍼링(Offset-Buffering)과 다중모드 스핀-다운(Multi Mode Spin-Down) 기법을 제안한다. 오프셋-버퍼링은 사용자의 시청 패턴을 분석하고 분석된 결과를 통해 버퍼링을 하므로 스핀들 모터의 모드를 대기모드로 길게 유지할 수 있다. 또한 오프셋 버퍼의 크기에 따라 다양한 모드로 스핀-다운을 하여 전력 소모를 줄일 수 있다. 실험 결과 본 논문에서 제안한 오프셋-버퍼링과 다중모드 스핀-다운은 기존의 풀-버퍼링(Full-Buffering)보다 28.3% 전력 소모량을 감소시켰으며, 스핀-업 횟수를 12.5% 줄였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.108-109
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.606-609
• /
• 1995

To stabilize a satellite, a spin stabilization method is used for attitude control. The spin stabilization uses the centrifugal force of a pendulum damper which is tilted long boom, to stabilize the unstable satellite. In this paper, an inverted pendulum system is implemented which is similar to the spin stabilization method. Study on the velocity of the rotation axis and the inverted pendulum's angle stability is shown. We designed a controller using a 32bit TMS320C31 DSP for the CPU and also performances by PLD control and Sliding Mode Control is compared.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.1-5
• /
• 2001

The potential use of spin filter device to retain Propionibacterium acidipropionici in the bioreactor under continuous mode of fermentation, and improve acid productivity, was examined. The yield of propionic acid based on lactose concentration was 51% in batch and 54% in continuous (dilution rate = 0.05 h(sup)-1) operation. The yield in continuous fermentation with cell retention using spin filter of 10 micron size (dilution rate = 0.05 h(sup)-1) was even higher at 70% (w/w). The volumetric productivity under batch and continuous mode of operation were 0.312g L(sup)-1 h(sup)-1 and 0.718g L(sup)-1 h(sup)-1 respectively. Continuous fermentation with cell retention demonstrated even higher volumetric productivities at 0.98g L(sup)-1 h(sup)-1 with out clogging problems. It could be used for utilization of cheese whey to produce propionic acid at higher yield and productivities.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.27-30
• /
• 2007

Experimental evidence suggests that spin pinning conditions for standing spin mode in polycrystalline $Ni_{84}Fe_{16}$ alloy film, is confirmed using the four categories of Camley et al. and the value of q$\bot$ for the pinning conditions, this was achieved by performing Brillouin light scattering measurements. The value of q$\bot$ was observed, in order to increase at a rate of $\pi$/2 with an increasing mode number. With this condition, the coexistence of standing spin wave modes was shown, with intermediate pinning, in addition to free and strong pinning. The values for spin-wave-stiffness constant ($D_B$), g-factor (g), and surface magnetization (4$\pi$M) of the Permalloy film were obtained from the results of BLS, and determined to be $D_B=1.85{\pm}0.05Oecm^2$, $g=2.11{\pm}0.02$, and 4$\pi$M=8.7 kG, respectively.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 임시총회 및 하계학술연구발표회
• /
• pp.53-54
• /
• 2009