• The Plant Pathology Journal
• /
• 제36권6호
• /
• pp.558-569
• /
• 2020

Fusarium head blight (FHB) is a devastating fungal disease of wheat (Triticum aestivum L.). The lack of genetic resources with stable FHB resistance combined with a reliable and rapid screening method to evaluate FHB resistance is a major limitation to the development of FHB resistant wheat germplasm. The present study utilized an immature wheat spike culture method to screen wheat spike culture derived variants (SCDV) for FHB resistance. Mycotoxin concentrations determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) correlated significantly (P < 0.01) with FHB severity and disease progression during in vitro spike culture. Selected SCDV lines assessed for FHB resistance in a Fusarium field disease nursery in Carman, Manitoba, Canada in 2016 showed significant (P < 0.01) correlation of disease severity to the in vitro spike culture screening method. Selected resistant SCDV lines were also crossed with an elite cv. CDC Hughes and the progeny of F₂ and BC₁F₂ were screened by high resolution melt curve (HRM) analyses for the wheat UDP-glucosyl transferase gene (TaUGT-3B) single nucleotide polymorphism to identify resistant (T-allele) and susceptible (G-allele) markers. The progeny from the crosses were also screened for FHB severity using the immature spike culture method and identified resistant progeny grouped according to the HRM genotyping data. The results demonstrate a reliable approach using the immature spike culture to screen for FHB resistance in progeny of crosses in early stage of breeding programs.

• 센서학회지
• /
• 제27권3호
• /
• pp.143-149
• /
• 2018

In this paper, we introduce an edge-spike modulation method for visible light communication (VLC). This method is effective in preventing LED flicker and 120 Hz noise interference in base-band VLC. In the VLC transmitter, edge-spikes are generated by passing the digital data through a simple RC-high pass filter (HPF). The LED modulation of the edge-spikes does not change the average power of the LED light; thus it prevents LED flicker. In the VLC receiver, the 120 Hz noise from other lighting lamps is easily eliminated by RC-HPF, while the edge-spike signal is detected normally. In our experiment, the message of an air-quality sensor was successfully transmitted using edge-spike modulation. This structure is useful in constructing, e.g., wireless gas monitoring sensor systems to warn and prevent harmful gas leakage accidents in buildings using LED light.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.52-57
• /
• 2012

Stall inception characteristics are researched to understand stall well. To realize different stall inception patterns, IGV stagger angle was changed. At design IGV stagger angle, spike, which is short length scale, is observed. Decreasing IGV stagger angle, spike changes to mode, which is long length scale, and further decreasing get multi cell. Compressor maps for each IGV stagger are shown to compare different stall inceptions. The characteristics of both spike and mode are confirmed in this experiment. Furthermore, transient from spike to mode is find. multi cell has 4cells and is little bit faster than mode. and multi cell shows 2nd, 3rd characteristics on compressor map.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.442-447
• /
• 2007

A very abnormal vibration was occurred at the LP(low pressure) turbine continuously during the pre-operation for a 550MW class USC(ultra super critical) steam turbine. This vibration was initiated at the rotating speed of about 3,450rpm and then the vibration amplitude was highly increased the number by $2{\sim}3$ times with the increase of the rotating speed to the rated speed(3,600rpm). In this paper, this abnormal vibration named spike vibration. This spike vibration was caused by the rubbing between the rotating bucket tip seal and the Lower Half of spill strip. Also, this paper presents the mechanism of the spike vibration and the proper method to eliminate this abnormal vibration problem. This result would be good practice to find the solution of similar high vibration in the USC steam turbines for power plant as well as industrial rotating machineries.

• 센서학회지
• /
• 제18권2호
• /
• pp.122-127
• /
• 2009

We have developed and reported several micro-spikes for minimally invasive biopsy. In this paper, a micro-tissue collecting tool for tissue diagnosis extracted by micro-spike is presented. Using proposed polydimethy-siloxane (PDMS) micro-tissue collecting tool, which has a negative micro-spike structure in a porous chamber, the extracted tissue in a micro-spike is effectively detached. The gastro-intestinal tissue of a pig is extracted in an in vivo environment, and then it is detached from a micro-spike using the PDMS micro-tissue collecting tool. A fine clinical picture of the detached tissue is acquired.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1238-1245
• /
• 2007

A very abnormal vibration was occurred at the LP(low pressure) turbine continuously during the pre-operation for a 550MW class USC(ultra super critical) steam turbine. This vibration was initiated at the rotating speed of about 3,450 rpm and then the vibration amplitude was highly increased the number by $2{\sim}3$ times with the increase of the rotating speed to the rated speed (3,600 rpm). In this paper, this abnormal vibration named spike vibration. This spike vibration was caused by the rubbing between the rotating bucket tip seal and the lower half of spill strip. Also, this paper presents the mechanism of the spike vibration and the proper method to eliminate this abnormal vibration problem. This result would be good practice to find the solution of similar high vibration in the USC steam turbines for power plant as well as industrial rotating machineries.

• 분석과학
• /
• 제8권4호
• /
• pp.427-434
• /
• 1995

Inductively coupled plasma mass spectrometry combined with the isotope dilution method is used for the determination of lithium. The isotope dilution method is based on the addition of a known amount of enriched isotope (spike) to a sample. The analyte concentration is obtained by measuring the altered isotope ratio. The spike solution is calibrated through so called reverse isotope dilution with a primary standard. The spike calibration is an important step to minimize error in the determined concentration. It has been found essential to add spike to a sample and the primary standard so that the two isotope ratios should be as dose as possible. Since lithium is neither corrosive nor toxic, lithium is used as a chemical tracer in the nuclear power plants to measure feedwater flow rate. 99.9% $^7Li$ was injected into a feedwater line of an experimental system and sample were taken downstream to be spiked with 95% $^6Li$ for the isotope dilution measurements. Effects of uncertainties in the spike enrichment and isotope ratio measurement error at various spike-to-sample ratios are presented together with the flow rate measurement results in comparison with a vortex flow meter.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권7호
• /
• pp.468-474
• /
• 2005

Brain-machine interface (BMI) based on neuronal spike trains is regarded as one of the most promising means to restore basic body functions of severely paralyzed patients. The spike train decoding algorithm, which extracts underlying information of neuronal signals, is essential for the BMI. Previous studies report that a linear filter is effective for this purpose and there is no noteworthy gain from the use of nonlinear mapping algorithms, in spite of the fact that neuronal encoding process is obviously nonlinear. We designed several decoding algorithms based on the linear filter, and two nonlinear mapping algorithms using multilayer perceptron (MLP) and support vector machine regression (SVR), and show that the nonlinear algorithms are superior in general. The MLP often showed unsatisfactory performance especially when it is carelessly trained. The nonlinear SVR showed the highest performance. This may be due to the superiority of the SVR in training and generalization. The advantage of using nonlinear algorithms were more profound for the cases when there are false-positive/negative errors in spike trains.

• 생명과학회지
• /
• 제13권1호
• /
• pp.29-33
• /
• 2003

맥주보리의 양적형질에 대한 유전정보를 얻고자 7개 품종으로 이면교배하여 $F_1$ 세대에 대한 유전자의 분포상태 분산성분.유전력 등을 분석한 결과를 요약하면 다음과 같다. 공시된 품종집단에 대한 $F_1$ 세대의 우성정도를 Vr-Wr graph상에서 볼 때 간장.수장.망장.곡립장.1수립수 등은 초우성으로 유전되었고 경직경.곡립폭 1000립중은 불완전우성으로 유전되었다. 각 형질에 대한 분산분석 결과에서 상가적효과, 우성효과, 모본효과, 정역간의 효과는 간장.수장.망장.경직경.곡립장.곡립폭.1수립수.1000립중 등에서 모두 유의하였다. 유전 분산성분에서 간장.수장.망장.경직경.곡립장.곡립폭.1수립수.1000립중은 우성효과가 상가효과보다 컸다. 협의의 유전력은 수장이 40.06%로서 높았다.

• 한국토양비료학회지
• /
• 제46권3호
• /
• pp.209-215
• /
• 2013

This study was conducted to investigate the effects of boron treatments on flower spike dieback of Statice (Limonium spp.) grown in soilless hydroponic and soil cultures under rain shelter system. The growth of Statice was gradually improved with increasing boron applications in the hydroponics, but not in soil culture with boron treatment as foliar spray or soil application. The degree of flower spike dieback in 6 levels (0, no dieback incidence to 5, very severe dieback incidence) ranged between 0.5 with boron application and 4.4 with no boron treatment. The content of boron in Statice flower spike increased with increasing rates of boron applications in the hydroponics, but the contents of P, Mg, and N were not affected by the boron application. However, K content was highest with no boron treatment. In soil culture, incidence of flower spike dieback decreased with foliar spray or soil application of boron. Therefore, boron application was effective in reducing flower spike dieback and improving cut-flower productivity and its quality, and the recommended rates of boron application were $50{\sim}80{\mu}gL^{-1}$ for hydroponics culture whereas 0.2% borex or ${\geq}0.4kg\;10a^{-1}$ boric acid by foliar spray application for soil culture.