• Journal of Korean Clinical Health Science
• /
• v.5 no.1
• /
• pp.808-815
• /
• 2017

Purpose. To analyze the refractive status between urban and rural regions, of children in Korea, in the age group of 13. Methods. From October 2016 to January 2017, forty subjects( 20 male subjects, 20 female subjects; 13 years) were performed in refraction test using the Auto-Refraction. Myopia, hyperopia, astigmatism, and anisometropia were defined as spherical equivalent(SE)${\leq}-0.50$ diopters, SE ${\geq}+1.00D$, cylinder error ${\geq}0.75D$ and SE difference${\geq}1.00D$ between binocular eyes, respectively. Results. The refractive error by spherical equivalent among all subjects was myopia 76.25%, astigmatism 35%, emmetropia 16.25%, anisometropia 8.75%, and hyperopia 5%. The prevalence of myopia and astigmatism were much more common in urban than rural region although the difference was not statically significant. Emmetropia and astigmatism were much more common in rural region than urban although the difference was not statically significant. The prevalence of spherical equivalent was much common from -1.00 diopter to -4.00 diopter. On the other hand, the prevalence of myopia was much more than hyperopia. There was a statistical significance between OD and OS of rural region in the spherical equivalent power(p<.000). Also, There was a statistical significance between OD and OS of urban region in the spherical equivalent power(p<.004). Therefore, there was a significant statistical similarity between urban and rural regions on the OD and OS in the spherical equivalent power. On the other hand, There was a significant statistical similarity between urban and rural regions of the OD and OS in the astigmatism power(p<0.000). However, in the rural and urban regions there was not statistical significance in the OD and OS concerning the spherical equivalent power and astigmatism power (p>0.1). Conclusions. Myopia was the most common refractive error in Korea young children. while hyperopia was few. There was not a statistical significance as age between rural and urban at spherical equivalent power( P> 0.01). These results suggested that the analysis of the refractive status at young children can give the useful diagnosis data for the correction of visual acuity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.726-733
• /
• 2005

A spherical surface referenced Shack-Hartmann method is studied for inspecting machining accuracy of large concave mirror This method is so strong to the vibration environment for using as an on-machine inspection system during polishing process of large optics comparing with the interferometry. The measuring uncertainty of the system is shown as less than p-v 150 m. On-machine measured surface profile data with this method is used for feed back control of the polishing time or depth to improve the surface profile accuracy of large concave mirror. Also, the spherical surface referenced Shack-Hartmann method is useful for measuring aspheric such as parabolic or hyperbolic surface profile, comparing that the interferomehy needs a special null lens, which is to be a reference and difficult to fabricate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1351-1358
• /
• 2000

Two dimensional aerosol dynamics considering the effects of particle generation, coagulation, thermophoresis, sintering and convection has been studied to obtain the growth of non-spherical silica particles in conjunction with determining flame temperature by performing combustion analysis of premixed flat flame. Heat and mass transfer analysis includes 16 species, 29 chemical reaction steps together with oxidation and hydrolysis of SiCl4. The effect of radiation heat loss has also been included. The predictions of flame temperatures and the evolution of particle size distributions were in a reasonable agreement with the existing experimental data.

• Journal of the Korean Society of Combustion
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2012

Laminar flame speeds of Methane at elevated temperatures and pressures were investigated using constant volume spherical chamber. Pressure trace during combustion was measured in each test and this was used in calculating laminar flame speed of Methane. To have large amount of data, experimental apparatus was fabricated with fully automatically controlled feature. A calculating code which calculates laminar flame speeds at various temperatures and pressures with one experimental result was used to calculate laminar flame speeds. The experimental and calculating methods were verified using the calculated laminar flame speed result with PREMIX code.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.25-31
• /
• 1990

We analyze the spherical-rectangular patch microstrip resonator with conformal surface by the cavity model and derive the formulas to calculate resonant frequency in the consideration of effective dielectric constant in order to minimize the errors of resonant frequency due to the fringing fields. A transmission type spherical-rectangular patch microstrip resonator operating at 3GHz, for example, is designed and fabricated on Epsilam-10 substate. Measuring data of resonant frequency and return loss are 2.985 GHz and -44.4dB respectively. Those well agreed with theoretical values.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.2
• /
• pp.105-109
• /
• 2013

In order to develop high voltage (HV) insulation materials, epoxy/spherical alumina composites with two different particle sizes (in ${\mu}m$) were prepared and a dynamic mechanical analysis (DMA) and electrical insulation breakdown strength test were carried out in sphere-sphere electrodes and the data were estimated using Weibull statistical analysis. Alumina content varied from 50 to 70 wt%. The electrical insulation breakdown strength for epoxy/alumina (50 wt%) was 44.0 kV/1 mm and this value decreased with increasing alumina content. The effects of insulation thickness and alumina particle size on the insulation breakdown strength were also studied. The insulation thickness varied from 1 mm to 3 mm, and the particle sizes were 7.3 or $40.3{\mu}m$.

• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.585-600
• /
• 2017

This study deals with simple solutions for a spherical or circular opening excavated in elastic-brittle plastic rock mass compatible with a linear Mohr-Coulomb (M-C) or a nonlinear Hoek-Brown (H-B) yield criterion. Based on total strain approach, the closed-form solutions of stresses and displacement are derived simultaneously for circular and spherical openings using original H-B and M-C yield criteria. Two simple numerical procedures are proposed for the solution of generalized H-B and M-C yield criteria. Based on incremental approach, the similarity solution is derived for circular and spherical openings using generalized H-B and M-C yield criteria. The classical Runge-Kutta method is used to integrate the first-order ordinary differential equations. Using three data sets for M-C and H-B models, the results of the radial displacements, the spreading of the plastic radius with decreasing pressure, and the radial and circumferential stresses in the plastic region are compared. Excellent agreement among the solutions is obtained for all cases of spherical and circular openings. The importance of the use of proper initial values in the similarity solution is discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.1-111.1
• /
• 2015

As an alternative way to get sophisticated nanostructures, atomic force microscopy (AFM) has been used to directly manipulate building primitives. In particular, assembly of metallic nanoparticles(NPs) can provide various structures for making various metamolecules. As far, conventionally made polygonal shaped metallic NPs showed non-uniform distribution in size and shape which limit its study of fundamental properties and practical applications. In here, we optimized conditions for deterministic manipulation of ultra-smooth and super-spherical gold nanoparticles (AuNPs) by AFM. [1] Lowered adhesion force by using platinum-iridium coated AFM tips enabled us to push super-spherical AuNPs in linear motion to pre-programmed position. As a result, uniform and reliable electric/magnetic behaviors of assembled metamolecules were achieved which showed a good agreement with simulation data. Furthermore, visualization of near field for super-spherical AuNPs was also addressed using photosensitive azo-dye polymers. Since the photosensitive azo-dye polymers can directly record the intensity of electric field, optical near field can be mapped without complicated instrumental setup. [2] By controlling embedding depth of AuNPs, we studied electric field of AuNPs in different configuration.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.266-271
• /
• 2002

The finite schematic eye based on spherical aberration and Stiles-Crawford effect is designed by an optimization method. It consists of four aspherical surfaces. The radius of curvature, thickness, asphericity, and spherical aberration are used as constraints in the optimization process. Stiles-Crawford effect in the pupil is considered as a weighting value for optimum design. The designed schematic eye has effective focal length of 20.8169 mm, back focal length of 15.4820 mm, front focal length of -13.8528 mm, and image distance of 15.7150 mm. When the pupil diameter is 4 mm, the diameter of entrance pupil and exit pupil are 4.6919 mm and 4.2395 mm, respectively. From the data of 75 measured Korean emmetropic eyes, this finite schematic eye is designed first in Korea.

• 전자공학회논문지 IE
• /
• v.46 no.1
• /
• pp.37-43
• /
• 2009

In this paper, we propose a new algorithm for 3D model retrieval based on spherical coordinate system. We obtains sample points in a polygons on 3D model. We convert a point in cartesian coordinates(x, y, z) to it in spherical coordinate. 3D shape features are achieved by adopting distribution of zenith of sample point in spherical coordinate. We used Osada's method for obtaining sample points on 3D model and the PCA method for the pose standardization 3D model. Princeton university's benchmark data was used for this research. Experimental results numerically show the precision improvement of proposed algorithm 12.6% in comparison with Vranic's depth buffer-based feature vector algorithm.