• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.590-597
• /
• 2010

HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1387-1393
• /
• 1996

A study on mesophase pitch as a matrix precursor of carbon fiber reinforced carbon (C/C) composite has been recently presented. This study is concerned with the production of mesophase pitch as matrix precursors for C/C composite from coal tar pitch. A commercial coal tar pitch was heat-treated at 25$0^{\circ}C$ for 2 hours to remove low molecular weight fraction from the pitch then increasing the temperature of the pitch to between 350~45$0^{\circ}C$ to produce mesophase pitch. The pitch was continuously stirred during this time and nitrogen gas was continuously bubbled through the pitch. Spherical and bulk mesophases were formed in the pitch after heat-treatment,. Parent and mesophae pitches were characterized by elemental analysis coke yield solubi-lity in tetrahydrofuran and hexane and an optical microscopy to measure the mesiophase content. It was neces-sary to produce C/C composite that a mesophase pitch with about 30-40 vol% mesophase spherulites can be infiltrated into a fiber preform without a filter effect as a matrix precursor conditions. This condition was satisfied with mesophase pitch heat treated at 40$0^{\circ}C$ for 2 hours. The other heat treatment conditions showed the nuclei of mesophase or bulk mesophae which were not satisfied with the matix precursor condition.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.191-195
• /
• 2016

Among the lithium metal oxides for hybrid-capacity, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. However, LTO has a limitation of low ionic and electronic conductivity. To enhance the ionic and electronic properties of $Li_4Ti_5O_{12}(LTO)$, we synthesized the spherical LTO/CNT composite by sol-gel process for hybrid capacitors. CNT interconnection networks between CNT-LTO particles enhanced electronic conductivity and electrochemical charging/discharging properties. All of the LTO samples was observed to show the spinel structure and spherical morphology with the diameter of $5{\sim}10{\mu}m$. Especially, spherical LTO/CNT composite of the CNT-3 wt% showed the enhanced capacity from 110 mAh/g to 140 mAh/g at 10 C.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.191-196
• /
• 2009

Experiments were conducted in a constant pressure combustion chamber using schlieren system to investigate the effects of carbon dioxide/nitrogen/helium diluents on cellular instabilities of syngas-air premixed flames at room temperature and elevated pressures. Laminar burning velocities and Markstein lengths were calculated by analyzing high-speed schlieren images at various diluent concentrations and equivalence ratios. Experimental results showed substantial reduction of the laminar burning velocities and of the Markstein lengths with the diluent additions in the fuel blends. Effective Lewis numbers of helium-diluted syngas-air flames increased but those of carbon dioxide- and nitrogen-diluted syngas-air flames decreased in increase of diluents in the reactant mixtures. With helium diluent, the propensity for cells formation was significantly diminished, whereas the cellular instabilities for carbon dioxide-diluted and nitrogen-diluted syngas-air flames were not suppressed.

• Journal of Welding and Joining
• /
• 제11권1호
• /
• pp.73-79
• /
• 1993

The phenomenon of metal transfer has been investigated for different transfer modes using a digital high speed motion analyzer and an arc shadow-graphing system based on a laser source and related optical system. It was observed that the pinch instability phenomenon did not occur for the globular transfer mode, since the liquid globule was then spherical rateher than a cylindrical liquid bar. On increasing the ratio of carbon dioxide to argon, the transition current from globular to spray transfer generally increased, but it is interesting that the transition was observed to occur at the lowest current in a 5% CO$_{2}$-95% argon gas mixture. For pure carbon dioxide and helium shielding gases, the drop frequency increased slowly with increasing current. At high currents or an argon based shielding gas, the length of liquid bar decreased as the carbon dioxide content increased. The acceleration of a droplet within the arc was determined using the gas drag force theory and was found to be greater than the experimental results.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.189-195
• /
• 2004

카본 블랙은 매우 낮은 밀도로 화장품에는 사용되지 않고 있지만 독성이 없고 안정한 물리적 특성과 검은색의 특성으로 이용 가치가 있다고 사료되는 바이다. 본 연구에서는 TEOS, a) PEO/ lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene을 ethanol/water 수용액상에서 계면활성제를 탄화시켜 sol-gei반응에 의해 meso-porous silica샘플을 얻었고 N2 조건하 50$0^{\circ}C$에서 열처리된 organic-inorganic hybrid silica를 합성하였다. Pore안에 카본 블랙을 함유하는 meso-porous silica는 친수성, 소수성 용매에서 모두 좋은 분산성을 보여준다. 이 샘플은 BET에 의해 specific surface area (750$m^2$/g)과 pore size (4-6 nm)이고, XRD측정으로 pore structure (cylindrical type)를, 샘플의 SEM촬영으로 morphology(0.1-0.5$\mu\textrm{m}$ 입자 크기를 갖는 spherical powder)를 갖는다는 것을 알아냈다. 이렇게 합성한 카본-실리카 블랙 컬러를 마스카라에 적용하면 일반적으로 마스카라에 사용되던 블랙 컬러 사용시 보다 좀더 검은색을 보여주는 것은 물론이고 우수한 분산성도 갖는다. 무엇보다 이 파우더의 밀도 조절이 가능하여 마스카라 뿐 만 아니라 모든 화장품에의 사용이 가능하다.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.50-50
• /
• 1988

Ti(OC2H5)4 농도, 물량, 용매, alcohol을 변화시켜 가수분해 반응 특성을 검토하였으며 submicron 구형 단분산 분말을 합성하기 위하여 연구를 수행하였다. TEOT 농도와 물량이 증가하면 가수분해 반응속도는 빨라지며 생성입자 size는 작아졌다. TEOT 농도가 0.1~-0.2 M, 물량이 3배일때 양호한 구형 단분산 분말을 얻을 수 있었다. 용매 alcohol의 탄소가지수가 많거나 탄소가지수가 길어지면 가수분해 반응속도는 늦어짐을 알 수 있었다. 제조된 TiO2분말의 평균입경은 0.8㎛ 정도의 구형단분산 입자이며 가열시 결정상은 550℃ 이상에서 Rutile을 확인할 수 있었으며 입자 size도 0.6~0.7 u로 감소하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.951-954
• /
• 2000

This paper presents a new cutting method, i.e. diamond cutting, aided by electrolysis, in order to cut ferrous materials with diamond tools. Diamond cutting is widely applied in manufacturing ultraprecision parts such as magnetic disk, polygon mirror, spherical/non-spherical mirror and copier drum, etc. because of the diamond tool edge sharpness. In general, however, diamond cutting cannot be applied to cutting steels, because diamond tools wear excessively in cutting iron based materials like steel due to their high chemical interaction with iron in high temperature. In order to suppress the diffusion of carbon from the diamond tool and to reduce increase of cutting force due to size effect, we attempt to change chemically the compositions of iron based materials using electrolysis in a limited part which will be soon cut. Through experiments under several micro-machining and electrolysis conditions, cutting using electrolysis, compared to conventional cutting, was found to result in a great decrease of the cutting force, a better surface and much less wear tool.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.243-248
• /
• 2009

Carbon-coated Cu nanopowders with core/shell structure have been successfully fabricated by pulsed wire evaporation (PWE) method, in which a mixed gas of Ar/$CH_4$ (10 vol.%) was used as an ambient gas. The characterization of the samples was carried out using x-ray diffraction (XRD), scanning electron microscope (SEM), and high resolution transmission electron microscope (HRTEM). It was found that the nanoparticles show a spherical morphology with the size ranging of 10-40 nm and are covered with graphite layers of 2-4 nm. When oxygen-passivated Cu nanopowders were annealed under flowing argon gas (600 and 800$^{\circ}C$), the crystallinity of $Cu_2O$ phase and the particle size gradually increased. On the other hand, carbon-coated Cu nanopowders remained similar to as-prepared case with no additional oxide or carbide phases even after the annealing, indicating that the metal nanoparticles are well protected by the carbon-coating layers.

• 공업화학
• /
• 제5권6호
• /
• pp.943-948
• /
• 1994

본 실험에서는 카본블랙 함량에 따른 미가황고무 혼합물의 물리적 특성과 가황고무 혼합물의 팽윤거동에 대해 고찰하였다. 카본블랙 함량 증가에 따라 미가황고무 혼합물 중의 bound rubber 함량은 증가하였으며 ${\alpha}_f$는 1.46이었다. 또한 고무 혼합물 중의 카본블랙은 구형입자의 거동을 보여주었다. Mooney-Rivlin의 응력-변형 방법에 의해 구한 가황고무의 $C_1$값은 카본블랙 함량 증가에 따라 증가하는 경향을 보였다.