• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1187-1194
• /
• 2009

During the last decade, possibility of flaw occurrences has been rapidly increased world-widely as the increase of operating times of petro-chemical facilities. For instance, from a recent in-service inspection, three different sized surface cracks were detected in welding parts of a spherical oxygen holder in Korea. While API579 code provides corresponding engineering assessment procedures to determine crack driving forces, in the present work, numerical analyses are carried out for the cracked oxygen holder to investigate effects of complex geometry, analysis model and residual stress. With regard to the detailed finite element analysis, stress intensity factors are determined from both the full three-dimensional model and equivalent plate model. Also, as an alternative, stress intensity factors are calculated for equivalent plate model by employing the noted influence stress function technique. Finally, parametric structural integrity evaluation of the cracked oxygen holder is conducted in use of failure assessment diagram method, J/T method and DPFAD method. Effects of the geometry and so forth are examined and key findings from the simulations are fully discussed, which enables to determine practical safety margins of spherical components containing a defect.

• 천문학논총
• /
• 제23권2호
• /
• pp.31-35
• /
• 2008

We present analytical approximations for calculating the scattering and escape of non-ionizing photons from a plane-parallel medium with uniformly illuminated by external sources. We compare the results with the case of a spherical dust cloud. It is found that more scattering and absorption occur in the plane-parallel geometry than in the spherical geometry when the optical depth perpendicular to the plane and the radial optical depth of the sphere are the same. The results can provide an approximate way to estimate radiative transfer in a variety interstellar conditions and can be applied to the dust-scattered diffuse Galactic light.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제4권2호
• /
• pp.137-144
• /
• 1997

In this paper we consider covering problems in spherical geometry. Let $cov_q{S_1}^n$ be the smallest radius of q equal metric balls that cover n-dimensional unit sphere ${S_1}^n$. We show that $cov_q{S_1}^n\;=\;\frac{\pi}{2}\;for\;2\leq\;q\leq\;n+1$ and $\pi-arccos(\frac{-1}{n+1})$ for q = n ＋ 2. The configuration of centers of balls realizing $cov_q{S_1}^n$ are established, simultaneously. Moreover, some properties of $cov_{q}$X for the compact metric space X, in general, are proved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1080-1084
• /
• 2001

In manufacturing a micro die with half spherical cavity by MEDM, it is necessary to prepare an electrode with the same shape. This paper suggests a simple method to manufacture a half spherical electrode based on tool wear. The tool wears more rapidly at the edge of a cylindrical electrode. In order to make a half spherical micro electrode, cylindrical electrode was fed into the workpiece by the distance of its radius. The d/R(depth/Radius) value varied with respect to capacitance and electrode diameter. The smaller the size of electrode was, the closer the electrode tip geometry approached to a half sphere.

• 천문학회보
• /
• 제19권
• /
• pp.10.2-11
• /
• 1994

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.102.2-102.2
• /
• 2008

• 대한수학회보
• /
• 제61권3호
• /
• pp.849-866
• /
• 2024

In this paper, we study the rectifying curves in multiplicative Euclidean space of dimension 3, i.e., those curves for which the position vector always lies in its rectifying plane. Since the definition of rectifying curve is affine and not metric, we are directly able to perform multiplicative differential-geometric concepts to investigate such curves. By several characterizations, we completely classify the multiplicative rectifying curves by means of the multiplicative spherical curves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.635-640
• /
• 2000

This paper presents the analysis method of the instantaneous screw axis using line geometry in bump and rebound motion of 5-SS multi-link suspensions. Instantaneous screw axis is based on screw motion, and screw motion of zero pitch can be expressed as $Pl{\ddot{u}}cker$ line coordinates of line geometry instead of screw coordinates. In screw coordinates, twist and wrench are described by components of instantaneous screw axis. For instantaneous motion of wheel assembly, the principle of virtual work with twist and wrench is applied to 5-SS multi-link suspension, and it makes 5 linear equations. Therefore, it is possible to find instantaneous screw axis by solving these equations. This analysis by line geometry demands geometric values only, such as the locations of spherical joints in the case of multi-link suspensions.

• 한국수학사학회지
• /
• 제35권3호
• /
• pp.73-113
• /
• 2022

In this paper we survey on the geometric development in the history of Joseon mathematics. We have relatively many research papers on the history of equations in Joseon but the history of geometry is limited to that of trigonometry (gugosul). We survey on the results on the whole geometry including the introduction of western geometry in Joseon. Joseon mathematics developed differently during several different periods. We investigate how geometric theories developed during those periods and the meaning behind them. We do not claim that our survey is anywhere close to a complete one. This is rather a preliminary attempt to collect research results to plan our research following those of our predecessors.

• 한국수학사학회지
• /
• 제33권3호
• /
• pp.155-165
• /
• 2020

Pythagorean theorem is a proposition on the relationship between the lengths of three sides of a right triangle. It is well known that Pythagorean theorem for Euclidean geometry deforms into an interesting form in non-Euclidean geometry. In this paper, we investigate a new perspective that replaces right triangles with 'proper triangles' so that Pythagorean theorem extends to non-Euclidean geometries without any modification. This is seen from the perspective that a rectangle is an equiangular quadrilateral, and a right triangle is a half of a rectangle. Surprisingly, a proper triangle (defined by Paolo Maraner), which is a half of an equiangular quadrilateral, satisfies Pythagorean theorem in many geometries, including hyperbolic geometry and spherical geometry.