• Advances in nano research
• /
• 제16권1호
• /
• pp.11-26
• /
• 2024

In this study, free vibration analysis of FG porous spherical cap reinforced by graphene platelets resting on Winkler-type elastic foundation has been surveyed for the first time. Three different types of porosity patterns are considered for the spherical cap whose two types of porosity patterns in the metal matrix are symmetric and the other one is uniform. Besides, five GPL patterns are assumed for dispersing of GPLs in the metal matrix. Tsai-Halpin and extended rule of the mixture are used to determine the Young modulus and mass density of the shell, respectively. Employing 3D FEM elasticity in conjunction with Hamilton's Principle, the governing motion equations of the structure are obtained and solved. The impact of various parameters including porosity coefficient, various porosity distributions in conjunction with different GPL patterns, the weight fraction of graphene Nano fillers, polar angles and stiffness coefficient of elastic foundation on natural frequencies of FG porous spherical cap reinforced by GPLs have been reported for the first time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.355.2-355
• /
• 2002

The receptance method was applied for the analysis of a cylindrical shell with a spherical cap attached at an arbitrary axial position of the shell. The boundary condition of the shell considered here was clamped-free condition. Before the analysis of the shell/spherical cap combined structure, natural frequencies of the cap and the shell were calculated separately and then they were used in the calculation of the frequencies of the combined structure by the receptance method. (omitted)

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.52.2-52.2
• /
• 2008

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제23권1호
• /
• pp.1-11
• /
• 1995

Thermospheric neutral winds and temperatures have been collected from the ground-based Fabry-Perot interferometer (FPI) at Thule Air Base ($76.5^{\circ}N{\;}69.0^{\circ}W$), Greenland since 1985. The thermospheric observations are obtained by determining the Doppler characteristics f the [OI] 6300 ${\AA}$ emissions of atomic oxygen. The FPI operates routinely during the winter season, with a limitation in the observation by the existence of clouds. For this study, data acquired from 1985 to 1991 were analyzed. The neutral wind measurements from these long-term measurements are used to investigate the influence of solar cycle variation on the high-latitude thermospheric dynamics. These data provide experimental results of the geomagnetic polar cap are also compared with the predictions of two semiempirical models : the vector spherical harmonics (VSH) model of Killeen et al. (1987) and the horizontal wind model (HWM) of Hedin et al. (1991). The experimental results show a good positive correlation between solar activity and thermospheric wind speed over the geomagnetic polar cap. The calculated correlation coefficient indicates that an increase of 100 in F10.7 index corresponds to an increase in wind speed of about 100 m/s. The model predictions reveal similar trends of wind speed variation as a function of solar activity, with the VSH and HWM models tending to overestimate and underestimate the wind speed, respectively.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.419-426
• /
• 2018

Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.157-164
• /
• 2004

This is a boundary integral formulation for elastic shallow shell structures subjected to both membrane and bending loads. Fundamental solutions for shell actions are determined from the plate solutions and, finally the corresponding kernel functions for shell BIEs can be constructed. It is illustrated by solving an example of uniform load of spherical cap.

• 자원환경지질
• /
• 제41권2호
• /
• pp.211-217
• /
• 2008

육상 및 해상에서 측정된 중력자료와 GRACE 인공위성으로부터 계산된 중력자료를 구면캡 조화분석(Spherical Cap Harmonic Analysis; SCHA)을 이용하여 통합하였다. 중력자료는 한국지질자원연구원에서 측정된 육상중력과 한국해양연구원과 국립해양조사원에서 측정된 해상자료를 이용하였으며, GRACE 인공위성 자료로는 구면조화함수의 계수형태로 되어있는 L-2 level 자료를 이용하여 중력이상값을 계산하였다 0.05도 간격으로 격자화 된 중력자료의 해상도와 구면캡 조화계수의 해상도를 일치시키기 위하여 조화계수를 order 80까지 설정하였으며 Generalized Minimal Residual (GMRES) 역산방법을 이용하여 구면캡 조화계수를 계산하였다. 이 계수로부터 다시 중력이상을 구한 결과 육상 및 해상자료와 0.950,그리고 GRACE 인공위성 자료와 0.995의 매우 높은 상관관계를 보여주어 본 연구의 방법이 매우 잘 적용 되었음을 알 수 있었다. 구면캡 조화분석의 적용으로 중자력 자료의 특성인 라플라스 방정식을 만족함으로써, 측정된 고도 이외에 다른 고도에서도 중력값을 계산할 수 있으며, 본 연구에서는 10 km에서 60 km 고도까지 중력이상을 계산하였다. 각 고도에서 매우 안정적인 결과를 얻을 수 있었으며, 인공위성 자료의 특성인 우수한 저주파성분과 육상 및 해상에서 측정된 자료의 상세한 고주파 성분이 매우 잘 융합되어 있는 것을 볼 수 있었다. 본 연구의 방법을 이용하여 여러가지 고도의 자료를 한꺼번에 통합할 수 있으므로 항공중력 둥의 자료가 추가될 경우, 더욱더 상세하고 안정적인 중력이상값을 계산 할 수 있을 것으로 기대된다.

• 자원환경지질
• /
• 제49권4호
• /
• pp.269-280
• /
• 2016

지역에 최적화된 스레피안 구면함수(spherical Slepian function)를 활용하여 남극을 중심으로 반경 $20^{\circ}$ 범위의 지역에 지각 자기이상의 3개의 방향 성분과 6개의 구배성분들을 표현하였다. 2013년 11월 유럽 항공 우주국이 발사한 3개의 자력 위성인 Swarm은 궤도 전개를 통해 동서 방향의 구배값은 물론 남북 및 수직방향의 구배값을 얻을 수 있도록 계획하였다. 이미 발사된 여러 중력위성들(i.e., GRACE and GOCE) 역시 이러한 구배값을 활용하여 보다 정확한 중력 이상값 및 지표에서의 시간에 따른 중력변화 연구등을 수행해 왔으나 자력 위성자료를 통해서는 많은 연구들이 이루어지고 있지 않는 상태이다. 한편 지역화 모델링은 관심 지역 또는 자료 분포의 제한인 지역인 경우에 활용될 수 있다. 또한 전지구 모델보다 효율적인 연산이 가능하여 위성자료로부터 고해상도의 지각 자기이상값을 표현할 수 있다는 장점을 지니고 있다. 또한 기존의 전지구 구면조화함수의 선형 결합으로 이루어진 기저함수들은 서로 직교성(orthogonality)이 유지되므로 스레피안 구면함수의 계수를 전지구 구면조화함수의 계수로 변환이 가능하여 스펙트럼 분석에 활용할 수 있다. 따라서 Swarm 위성자료의 구배 성분을 이용한 지역화 모델링 방법은 앞으로 많은 활용이 기대되며 여기서는 Swarm 위성자료로부터 얻어진 지각 자기이상값의 전지구 조화함수 계수 모델을 사용하여 자기이상의 방향성분과 구배성분을 유도하고 이를 스레피안 구면 조화함수에 적용하여 관심지역인 남극지역의 방향 성분과 구배 성분을 표현하고 이에 대한 결과를 토의 하고자 한다.

• 지구물리
• /
• 제9권3호
• /
• pp.181-188
• /
• 2006

The data, methodology, and the resulting accurate gravimetric geoid model for the Korean Peninsula (latitude from 32˚ N to 40˚ N and longitude from 124˚ E to 131˚ E) are presented in this study. The types of used data were a high degree geopotential model (the EGM96 spherical harmonic coefficient set), a set of 12,615 land gravity observations, 1,056,075 shipborne gravity observations, and KMS2002 gravity anomalies from satellite altimetry. The remove-restore technique was successfully applied to combining the above mentioned data sets using up to degree and order 112 of the EGM96 coefficient. The residual geoid was calculated with residual Free-Air anomaly values using the spherical Stokes' formula with a 37-km integration cap radius. The geoid model was referred to WGS84 geodetic system and was tested using a set of GPS/levelling geoid undulations. The absolute accuracy is 0.132 m and some improvement compared to the PNU95 geoid model was found.

• 한국의류산업학회지
• /
• 제24권3호
• /
• pp.333-345
• /
• 2022

This study developed and evaluated the motion control of 3D printed fingers applied to smart gloves. Four motions were programmed by assembling the module using the Arduino program: cylindrical grasping, spherical grasping, tip-to-tip pinch gripping, and three-jaw pinch gripping. Cap and re-entrant (RE) strip types were designed to model the finger. Two types of modeling were printed using filaments of thermoplastic elastomer (TPE) and thermoplastic polyurethane (TPU). The prepared samples were evaluated using three types of pens for cylidrical grasping, three types of balls for spherical grasping, and two types of cards for tip-to-tip pinch gripping and three-jaw pinch gripping. The motion control of fingers was connected using five servo motors to the number of each control board. Cylindrical and spherical grasping were moved by controlling the fingers at 180° and 150°, respectively. Pinch gripping was controlled using a tip-to-tip pinch motion controlled by the thumb at 30° and index-middle at 0° besides a three-jaw pinch motion controlled by the thumb-index finger-middle at 30°, 0°, and 0°, respectively. As a result of the functional evaluation, the TPE of 3D-printed fingers was more flexible than those of TPU. RE strip type of 3D-printed fingers was more suitable for the motion control of fingers than the 3D-printed finger.