• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1307-1314
• /
• 2009

The isotope ratio of $^{134}Cs/^{137}Cs$ in a spent PWR fuel sample was obtained with a newly developed gamma/neutron combined measuring system at KAERI. Burnup and Pu/U ratio of the spent fuel sample were determined by using the measured isotope ratio and the burnup-isotope ratio correlation equations calculated from the ORIGEN-ARP computer code. The results were compared and evaluated with the chemically determined burnup and Pu/U ratio. As a result of the comparative evaluation, the nondestructively determined burnup and Pu/U ratio values showed a good agreement with the chemically obtained results to within a 4.5% and 0.8% difference, respectively.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.298-308
• /
• 2005

The methods for determining C-14 and tritium contents in the spent nuclear fuel sample were developed. The carbon-14($^{14}CO_2$) released during the dissolution of the spent fuel sample and $CaCO_3$ ($CO_2$ carrier) with 8 M $HNO_3$ at $90^{\circ}C$ was collected in trap containing 1.5 M NaOH. The volatile radioactive iodine evolved when the spent fuel was dissolved, was trapped on to Ag-silicagel (Ag-impregnated silicagel) adsorbent in column which is connected to two NaOH traps. The solutions which contain tritium as HTO after fuel dissolution were decontaminated by deionization with a mixture of cation and anion exchange resins and inorganic ionexchangers. The amount of C-14 in the trap solutions and the HTO concentration in the resulting deionization water were then determined by liquid scintillation counting.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.637-643
• /
• 2022

Uranium and plutonium are required to be accounted in spent fuel head-end and major recovery area in pyro-process for safeguards purpose. The possibility of neutron resonance technique, as a nondestructive analysis, was simulated on isotopic fissile analysis for large scale process. Neutron resonance technique has advantage to distinguish uranium from plutonium directly in mixture. Simulation was performed on U235 and Pu239 assay in spent fuel and for scoping examination of assembly type. The resonance energies were determined for U235 and Pu239. The linearity in the neutron transmission was examined for the selected resonance energies. In addition, the limit for detection was examined by changing sample density, thickness and content for actual application. Several factors were proposed for neutron production and the moderated neutron source was simulated for effective and efficient transmission measurement. From the simulation results, neutron resonance technique is promising to analyze U235 and Pu239 for spent fuel assembly. An accurate fissile assay will contribute to an increased safeguards for the pyro-processing system and international credibility on the reuse of fissile materials in the fuel cycle.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.198-198
• /
• 2002

• Nuclear Engineering and Technology
• /
• v.33 no.4
• /
• pp.375-385
• /
• 2001

The total burnup in the spent U$_3$Si/Al fuel samples from Hanaro reactor was determined by destructive methods using $^{148}$ Nd, the sum of $^{143}$ Nd and $^{144}$ Nd, the sum of $^{145}$ Nd and $^{146}$ Nd, and the sum of total Nd isotopes($^{143}$ Nd, $^{144}$ Nd, $^{145}$ Nd, $^{146}$ Nd, $^{148}$ Nd and $^{150}$ Nd) monitors. The fractional($^{235}$ U) turnup in the spent fuel samples was also determined by U and Pu mass spectrometric method. The samples were dissolved in a mixture of 4 M HCI and 10 M HNO$_3$ without any catalyst. The separation of U, Pu and Nd from the spiked and unspiked sample solutions was achieved by two sequential anion exchange separation methods. The isotope compositions of these elements, after their separation from the fuel samples were measured by mass spectrometry. The contents of the elements in the spent fuel samples were determined by isotope dilution mass spectrometric method(IDMS) using $^{233}$ U, $^{242}$ Pu and $^{150}$ Nd as spikes. The effective fission yield was calculated from the weighted fission yields averaged over the irradiation period. The difference between total turnup values determined by various Nd monitors were in the range of 1.8%.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.166-177
• /
• 1993

A simplified thermal analysis method to evaluate the maximum temperature of the CANDU 37-element fuel bundle within a fuel basket in a given spent fuel dry storage canister has been presented along with the results of sample analyses performed to examine the parametric effects of the ambient conditions on the maximum fuel temperature within a canister. To solve the multi-dimensional heat transfer problem of the complex geometry of rod bundles within a canister where three modes of heat transfer are superimposed, the CANDU spent fuel bundles stored in the dry storage canister are first replaced by equivalent concentric fuel cylinders. The simplified axi-symmetric two-dimensional multi-mode heat transfer problem of the equivalent fuel cylinders is then analyzed with an existing computer code, HEATING5, using additional input data and heat transfer correlations. A comparison between the predicted temperature profile and the mock-up test results shows that the agreement is quite satisfactory.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.569-574
• /
• 2005

A coupled column liquid chromatography system was applied for the separation of the burnup monitors in spent nuclear fuel sample solutions. A reversed phase column was studied for the adsorption behavior of uranyl ions using alpha-hydroxyisobutyric acid as an eluent and used for the separation of plutonium and uranium. A cation exchange column prepared by coating 1-eicosylsulfate onto the reversed phase column was used for the separation of the lanthanides. In addition, retention of Np was checked with the reversed phase column and cation exchange column, respectively, according to the oxidation states to observe the interference effect for the separation of burnup monitors. This chromatography system showed a great reduction in separation time compared to a conventional anion exchange method. A good agreement from the burnup data was obtained between for this method and a conventional anion exchange method to within 1% of a difference for the spent nuclear fuel samples of about 40 GWD/MTU.

• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.596-607
• /
• 2015

In this paper, we describe a computer program, iBEST (inverse Burnup ESTimator), that we developed to accurately estimate the burnup histories of spent nuclear fuels based on sample measurement data. The burnup history parameters include initial uranium enrichment, burnup, cooling time after discharge from reactor, and reactor type. The program uses algebraic equations derived using the simplified burnup chains of major actinides for initial estimations of burnup and uranium enrichment, and it uses the ORIGEN-S code to correct its initial estimations for improved accuracy. In addition, we newly developed a stable bisection method coupled with ORIGEN-S to correct burnup and enrichment values and implemented it in iBEST in order to fully take advantage of the new capabilities of ORIGEN-S for improving accuracy. The iBEST program was tested using several problems for verification and well-known realistic problems with measurement data from spent fuel samples from the Mihama-3 reactor for validation. The test results show that iBEST accurately estimates the burnup history parameters for the test problems and gives an acceptable level of accuracy for the realistic Mihama-3 problems.

• Nuclear Engineering and Technology
• /
• v.36 no.2
• /
• pp.175-183
• /
• 2004

For the analysis of a dry process fuel cycle, new modules were implemented into the fuel cycle analysis code DYMOND, which was developed by the Argonne National Laboratory. The modifications were made to the energy demand prediction model, a Canada deuterium uranium (CANDU) reactor, direct use of spent pressurized water reactor (PWR) fuel in CANDU reactors (DUPIC) fuel cycle model, the fuel cycle calculation module, and the input/output modules. The performance of the modified DYMOND code was assessed for the postulated once-through fuel cycle models including both the PWR and CANDU reactor. This paper presents modifications of the DYMOND code and the results of sample calculations for the PWR once-though and DUPIC fuel cycles.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2002

The selective removal of cesium by ammonium molybdophosphate (AMP) was studied in order to reduce an interference by high radioactivity of cesium on the determination of low radioactive elements in leachate of spent fuel. The removal of Cs, U, Ce, La, Co Ca, Na Sr and K was investigated for the leachate and the bentonite in contact with a spent fuel. More than 90% of cesium was removed by AMP and Ca, Na, Co and Sr was remained in 0.1 M $HNO_3$. However, three valence elements such as La and Ce were also removed by AMP. Though a little of potassium of the bentonite components was adsorbed on AMP, the potassium in the bentonite solution diluted to its concentration in a real sample would not affect the capacity of AMP greatly. From another experiment for the separation of strontium as a leaching indicator of spent fuel, the recovery of strontium in 8.0 M $HNO_3$ solution by using Sr-resin (Eichrom, P/N SR-B50-A) was more than 95% by eluting with 0.05 M $HNO_3$.