• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1943-1947
• /
• 2016

Korea Electrical Safety Cooperation(KESCO) have provided the electrical safety speed-call service from 2007 year. Purpose of the service is to reduce discomfort of electricity use and to prevent electrical accident like as electrical fire and shock accident by providing emergency treatment service on fault of the residential electrical facilities notified in the specific house like as a lower-income group and a social welfare facility. But efficiency and economic evaluation of the electrical safety speed-call service is impossible because analysis on the quantitative effect of the service is difficult. This paper presents cost-benefit analysis method and result of the electrical safety speed-call service. The presented cost-benefit analysis method has a two-step process: the first step is to measure quantitative electrical fire prevention effect of the service by using electrical accident statistics and developing outcome analysis logic model of the service effect, and the second step is to analysis cost-benefit(B/C)of the service by calculating quantitative benefit analysis on the measured quantitative electrical fire prevention effect. The results showed that cost-benefit(B/C)of the electrical safety speed-call service is over 4 after 2010 year.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.105-113
• /
• 2003

In CDMA cellular system, inefficient Channel assignment for high-speed mobile host increase call blocking probability For it has been method proposed to guarantee QoS upon tn the speed of hierarchical cell that is allocated Queues and dedicated channels of high speed mobile host's speed. In this paper, We allocated the dedicated channel of high-speed handoff In FA (Foreign Agent), only if the receive signal strength of mobile host in current cell that there is low traffic in HA (Home Agent). also, we created new Circular queue LiFA (Limited Foreign Agent) for high-speed handoff call that signal strength is weak in certain FA, and had this High-speed handoff call to be ready for Life time to the new Circular queue LiFA. Thus improve the rate of the forced call termination.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.14-21
• /
• 1998

In providing with low speed multimedia services, a call blocking rate is greatly varied according to the transmission rate, and thereofr, the call blocking rate is remarkably increased for a service having a high transmission rate compared to a service having a low transmission rate. This paper presents three methods of solving this problem; Packing Scheme in which available channels distributed to each frequency channel are concentrated on one frequency channel and a call having a high transmission rate is assigned to the frequency channel; Queuing Scheme in which queuing is assigned to calls under service is temporarily reduced and a call having a high transmission rate is allowed. The result of performance analysis for 13 Kbps and 128 Kbps service through computer simulation showed that the call blocking rate for 128 Kbpx service was reduced by tens of percent accoring to loads.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2070-2079
• /
• 1997

In this paper, we proposed the FNCAC (fuzzy neural call admission control) scheme of the ATM networks which used the benefits of fuzzy logic controller and the learning abilities of the neural network to solve the call admission control problems. The new call in ATM networks is connected if QoS(quality of service) of the current calls is not affected due to the connection of a new call. The neural network CAC(call admission control) system is predictable system because the neural network is able to learn by the input/output pattern. We applied the fuzzy inference on the learning rate and momentum constant for improving the learning speed of the fuzzy neural network. The excellence of the proposed algorithm was verified using measurement of learning numbers in the traditional neural network method and fuzzy neural network method by simulation. We found that the learning speed of the FNCAC based on the fuzzy learning rules is 5 times faster than that of the CAC method based on the traditional neural network theory.

• IE interfaces
• /
• v.17 no.4
• /
• pp.466-471
• /
• 2004

In this paper, I develop a simple dynamic resource allocation algorithm that reduces the call blocking rate by improving the resource utilization of the WCDMA (Wideband Code Division Multiple Access) systems under multimedia service environment. Simulation results show that the proposed algorithm significantly reduces the blocking rate of high speed multimedia calls. The algorithm developed in this paper is currently working in the commercial WCDMA IMT-2000 system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.85-94
• /
• 2005

In this thesis, we propose a Speed Accommodation Priority Algorithm Scheme(SPAS) and Traffic Control Model Scheme (TCMS) to satisfy a desired handoff dropping probability and to reduce the blocking probability of new calls using mobility characteristics and handoff rate in mobile communication networks. The guard channels below threshold can guarantee the Quality of Service(QoS) in terms of the request handoff dropping probability and the guard channels above the threshold can be used to handle high priority new calls and high priority handoff calls. When the ratio of the handoff call arrival rate is less then the ratio of the new call arrival rate, the proposed method can guarantee the new call better than the previous guard channel scheme.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.608-611
• /
• 2004

Grid computing environment can be used to interconnect a wide variety of geographically distributed heterogeneous computing resources based on high-speed network. To make business service, it is necessary for Grid accounting system to measure the computational cost by consuming computer resources. To collect resource consumption data, and to keep track of process without needing to recompile kernel source, we use system call wrapping. By making use of this technique, we modifies system call table and replace existing system call to new system call that can monitor processes running in CPU kernel currently. Therefore we can measure user process resource usage for Grid accounting system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.1-12
• /
• 2008

In this paper, we described about core technologies required for the seamless service implementation and the communication system structure conceiving required for call & response services in order that the real-time traffic information service is consecutively provided to the vehicle moving at high speed. The SMART highway service is the information communication environment build-up concept which the real-time C&R service is comprised of the vehicle moving with 160km/h above. It was possible in case of being the low speed car in the DSRC system structure. However, there is a limit in the high speed environment as the DSRC system like a convention. In this paper, we proposed the structure of fitting for the SMART highway environment using the hand-over technique compositing the base station and several repeaters of DSRC system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.66-73
• /
• 2011

I try to solve the problem of the usage of the general software interrupt with the nested call of the software interrupt and the effective passing way of the parameters. The software interrupt should be protected against the indiscriminate access because it is used to call the system functions or to use the system resources by generating a software interrupt. But, it is difficult to effectively handle the SWI instruction because of its limited usage. I designed and implemented nested call of the software interrupt and the effective way that handle the parameters in the software interrupt service routine to solve this problem in this paper. In other words, from the single SWI call to the nested SWI call, I improved the software interrupt use all the more flexibly, and I compared and analyzed the strong and weak points of the two passing ways of the parameters. The main differences between these two ways are speed and readability. The stack pointer getting way incurred a lot of overhead although it has a very great readability. But, the stack pointer passing way producted 19% of the effectivity in speed by reduce overhead.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.557-567
• /
• 2018

There are currently various file encryption solutions for encrypting and storing files on disk. However, the existing file encryption solutions handle encryption and decryption all at once by file or directory. In this paper, we propose a system call supporting partial encryption function of the file. The user sets the encryption information with the system call interface at a portion where encryption of the file data is desired. And then the user writes file data, the data is encrypted and stored. Also if the user sets decryption information and reads the file data, the necessary part is decrypted by applying the set information. For the proposed system call, It consists of inspection module, management module, encryption module, decryption module, and HMAC module as per required system call. And it was implemented on the Linux environment. Also the operation of implemented system call was verified on the development board, and the performance was analyzed by measuring performance speed.