• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.409-417
• /
• 2009

This paper is focused on a relationship between the noise and vibration of a wheelset and the railway irregularity of a high speed railway using a time-varying frequency transform for a preliminary research of the railway condition monitoring by an in-service high-speed railway vehicle. Generally, the monitoring has been performed by a special railway inspection vehicle or industrial engineers for railway maintenance. However, they have been limited at night due to the in-service high-speed railway vehicles, and too slow to monitor all of the section. To solve this problem, the monitoring should be performed by an in-service high-speed railway vehicle. For the research, the noise and vibration of a wheelset are utilized, because they are closely related to the railway condition. They are measured by using some microphones and accelerometers, and stored in an on-board data acquisition system. The signals are post-processed by a time-varying frequency analysis and compared with the result of a railway geometry and profile measurement system. From the comparison, it is able to observe the relationship between the noise and vibration of a wheelset and the irregularity of a high-speed railway. Also, some distinct frequency components are observed, which are not observed in the railway geometry and profile.

• Wind and Structures
• /
• 제28권4호
• /
• pp.203-213
• /
• 2019

The topography and geomorphology are complex and changeable in western China, so the railway transition section is common. To investigate the aerodynamic effect of the subgrade-tunnel transition section, including a cutting-tunnel transition section, an embankment-tunnel transition section and two typical scenarios for rail infrastructures, is selected as research objects. In this paper, models of standard cutting, embankment and CRH2 high-speed train with the scale of 1:20 were established in wind tunnel tests. The wind speed profiles above the railway and the aerodynamic forces of the vehicles at different positions along the railway were measured by using Cobra probe and dynamometric balance respectively. The test results show: The influence range of cutting-tunnel transition section is larger than that of the embankment-tunnel transition section, and the maximum impact height exceeds 320mm (corresponding to 6.4m in full scale). The wind speed profile at the railway junction is greatly affected by the tunnel. Under the condition of the double track, the side force coefficient on the leeward side is negative. For embankment-tunnel transition section, the lift force coefficient of the vehicle is positive which is unsafe for operation when the vehicle is at the railway line junction.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.491-500
• /
• 2022

큰 상부 형상을 가지는 FLNG (Liquefied Natural Gas Floating Production Storage Offloading Units, LNG FPSOs) 등의 해양구조물은 안정적인 운동성능 확보 및 계류라인 설계에 있어 정도 높은 풍하중 추정이 필수적이다. 따라서 본 연구의 목적은 FLNG의 풍하중 추정을 위한 수치해석 기법을 개발하는 데 있다. 특히, 본 연구에서 개발한 수치해석 기법은 저자의 이전연구를 FLNG에 맞추어 수정하였다. 풍하중 추정을 위한 수치해석은 15° 간격으로 0-360° 범위에서 균일 풍속 조건과 풍속 프로파일을 적용한 NPD (Norwegian Petroleum Directorate) 조건에서 수행하였다. 먼저, NPD 모델 풍속 프로파일 모델 개발을 위해 Sand-Grain Roughness 변화에 따른 풍속 프로파일을 분석하였다. 개발된 NPD 모델을 이용하여 3가지 풍향 (Head, Quartering & Beam)에 대한 메쉬 수렴성 시험을 수행하였다. 최종적으로 개발된 NPD 모델과 메쉬를 이용하여 균일한 풍속 조건과 NPD 조건에서의 풍하중을 평가하고 비교하였다. 본 연구에서는 RANS (Reynolds-averaged Navier-Stokes) 기반 Solver인 STAR-CCM+ (17.02)를 이용하였다. 결과를 요약하면, 풍속 프로파일을 적용한 NPD 모델에서의 풍하중은 균일 풍속(10m/s) 조건과 비교하여, Surge와 Yaw 하중이 최대 20.35 % 와 34.27% 증가하였다. 특히, 특정 일부 구간에서만 큰 하중의 차이를 보인 Sway (45°< α < 135°, 225°< α < 315°)와 Roll (60° < α < 135°, 225° < α < 270°)은 구간별 평균 증가율이 15.60%와 10.89% 수준으로 나타났다.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.98-103
• /
• 2015

가속도추종 유로개방장치는 고속 비행체의 가압식 연료탱크에서 연료가 쏠림현상으로 인해 단절되는 것을 막아 연속적으로 흐르게 한다. 기개발된 이 유로개방장치를 실제 고속으로 시험하는 것은 까다로운 시험조건과 비용문제로 많은 어려움이 따른다. 따라서 본 논문에서는 저속 항공기에 탑재해 기본적인 역중력 시험(Negative-g test)을 수행하고 RecurDyn으로 해석한 결과와 비교하였다. 그리고 고속비행체의 비행궤적에 따른 유로개방장치의 동역학적 거동을 RecurDyn으로 알아보았다.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.739-747
• /
• 2021

This study examined the measurement conditions of the texture profile analysis (TPA) experiments that are typically used to measure the physical properties of sausage. As the measurement conditions (compression ratio and cross-head speed) were changed, the significant differences between the values of textural parameters (hardness, adhesiveness, springiness, cohesiveness, chewiness) of samples changed. Furthermore, among the measurement conditions, there was more variation in the significant difference between the value of samples due to a change in the compression ratio than due to a change in the cross-head speed. The highest variation in significant difference was observed between the values of cohesiveness of samples due to changes in measurement conditions, whereas the lowest variation in significant difference was observed between the values of springiness of samples due to change in measurement conditions. Therefore, it is desirable to provide a clear basis for setting specific measurement conditions for TPA test, since significant differences in the values of textural parameters of samples were caused by differences in cross-head speed or compression ratio, not by a difference in samples, when analyzing the cohesiveness of sausage, especially.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.977-978
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1107-1108
• /
• 2009

• 한국분무공학회지
• /
• 제12권2호
• /
• pp.79-85
• /
• 2007

In this study, the effect of jet velocity profile on the thickness and velocity of the liquid sheet formed by two impinging low speed jets was investigated. To predict the distribution of thickness and velocity of liquid sheet theoretically, the jet velocity profile which was measured experimentally was adopted in addition to the constant jet velocity as well as Poiseuille's parabolic profile. For three cases, the distribution of thickness and velocity of liquid sheet was analytically predicted by solving conservation equations including stagnation point. The predicted results were compared with previous experimental results. The jet velocity profile definitely affected the resulting characteristics of liquid sheet. The distribution of thickness and velocity of liquid sheet was more close to the measured results compared with that which was predicted by the assumption of constant jet velocity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.20-26
• /
• 2005

A running-profile generation method has been developed that efficiently generates the minimum-energy running profile, even in railway lines which have complicated speed limit sections. In the developed method, the problem of minimizing energy consumption is formulated as a resource allocation problem by dividing a running profile into several blocks, and is solved by the incremental method. A concept of Uni-Braking Block (UBB) which has only one brake section within it is introduces for the formulation. This paper proposes a specific method for running profile in the railway lines by using UBB. And proposes the algorithm to generate the running profile with minimum-energy.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.149-153
• /
• 2009

Profile development of the melt spinning process of poly(ethylene terephthalate) (PET) was simulated by a numerical method under the consideration of two constitutive equations of Newtonian and upper convected Maxwell (UCM) models. The viscoelastic characteristics of the polymer were considered via UCM constitutive equation that considered relaxation time as a function of temperature and molecular weight. The UCM model predicted the diameter profile better than the Newtonian, while velocity development was slower than the Newtonian model. Viscoelasticity played an important role in accurately predicting diameter profile. However, even though neck-like deformation was observed in the UCM model, the exact position of the deformation under high speed spinning was not obtained.