• 소음진동
• /
• 제8권5호
• /
• pp.964-973
• /
• 1998

본 논문에서 자기 축수 시스템의 부상과 불평형 보상 제어기를 제안한다. 특정한 동작속도에서 불균형 진동과 부상을 제어하기위해 우리는 이산시간 Q 매개변수화 제어를 사용한다. 회전자의 속도가 p=0일 때, 회전소도와 같은 주파수로 회전자의 불균형은 없다. 그래서 부상을 만들기 위해 우리는 제어기가 z=1의 단위원에서 극점을 가지는 Q매개변수화 Q를 선택한다. 그러나 회전자의 속도가 p$\neq$0일 때, 회전속도와 같은 주파수로 정현파의 외란이 존재하게 된다. 그래서 이 외란의 점근적인 소멸을 하기위해 Q 매개화변수 제어기 자유 변수 Q가 제어기가 어떠한 회전속도 p에 대한 z=expjpTs에 있는 단위 원에서 극점을 가지도록 선택된다. 첫째로, 우리는 이 연구에서 적용된 실험적인 구성을 소개한다. 두 번째로, 우리는 차분 방정식의 형태로 자기축수 시스템의 수학적인 모델을 제안한다. 세 번째로 우리는 제안된 이산 시간 Q매개변수화 제어기 설계방법을 설명한다. 제어기의 자유 매개변수 Q는 안정한 전달함수가 된다고 가정한다. 네 번째로, 우리는 설계목적을 만족하는 자유 매개변수가 복잡한 최적문제를 풀기보다는 선형 방정식을 구함으로서 만족될 수 있다. 마지막으로 몇 개의 시뮬레이션과 실험적인 결과가 제언된 제어기를 평가하기 위해 구해진다. 획득된 결과는 회전설계 속도에서의 불균형 진동을 제어하는 제안된 제어기의 효과를 나타낸다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.758-761
• /
• 2004

This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.

• 한국지능시스템학회논문지
• /
• 제5권2호
• /
• pp.3-12
• /
• 1995

A controller utilizing fuzzy logic is developed to control the speed of a motor in a washing machine by choosing an appropriate phase. Due to the hardship imposed on obtaining a result from a relation established for inputs, present speed and present rate of speed, and ouput, a phase, of the system that can be tested against an experimental result, it is impossible to apply a genetic algorithm to fine-tune the fuzzy logic controller. To avoid this difficulty, a proper assumption that the parameters of an if-part of a primary fuzzy logic controller have a functional relationship with an error between computed values and experimental ones in made. Setting up of a fuzzy relationship between the parameters and the errors is then achieved through experimentally obtained data. Genetic Algorithm is then applied to this secondary fuzzy logic controller to verify the fuzzy logic. In the verification process, the primary fuzzy logic controller is used in obtaining experimental results. In this way the kind of difficulty in obtaining enough experimental values used to verify the fuzzy logic with genetic algorithm is gotten around. Selection of the parameters that would produce the least error when using the secondary fuzzy logic controller is done with applying genetic algorithm to the then-part of the controller. In doing so the optimal values for the parameters of the if-part of the primary fuzzy logic controller are assumed to be contained. The experimental result presented in the paper validates the assumption.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.14-19
• /
• 2008

This paper proposes a mixed $H_2/H_{\infty}$ optimal PID controller with a genetic algorithm based on the dynamic model of a brushless direct current (BLDC) motor and applies it to speed control. In the dynamic model of the BLDC motor with perturbation, the proposed controller guarantees arobust and optimal tracking performance to the desired speed of the BLDC motor. A genetic algorithm was used to obtain parameters for the PID controller that satisfy the mixed $H_2/H_{\infty}$ constraint. To implement the proposed controller, a control system based on PIC18F4431 was developed. Numerical and experimental results are shown to prove that the performance of the proposed controller was better than that of the optimal PID controller.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.347-353
• /
• 2003

A nonlinear speed controller for a surface mounted permanent magnet synchronous motor (PMSM) based on a newly developed adaptive backstepping approach is presented To compensate parameter uncertainties and load torque disturbance, a nonlinear adaptive backstepping control law and adaptive law are derived systematically through virtual control input and suitable Lyapunov function. Also, speed observer without using costly speed sensor is presented. Simulation results show that the proposed controller can observe the speed and track the reference speed signal generated by a reference model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.603-605
• /
• 1994

The Single-Phase induction motor is widely used in home appliances, especially refrigerator, air conditioner and washing machine. Recently many home appliances that use the motor require the speed control to get the various and convenient functions for the customers. Generally it is so hard to control the speed of the Single-Phase induction motor and to get the wide range of the speed variation. In this raper, the speed controller using P-I is designed for the Single-Phase induct ion Motor. The experimental results of the phase controller using P-I show the wide speed control of the Single-Phase induction motor and rebuff control to load change.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.977-983
• /
• 2011

This paper proposes a new adaptive speed controller to achieve a robust speed control of a permanent magnet synchronous motor(PMSM). The proposed adaptive regulator does not require any information on the motor parameter and load torque values, so it is very insensitive to model parameter and load torque variations. Also, the stability of the proposed adaptive control system is proven. To validate the robustness of the proposed adaptive speed controller, both simulation and experimental results are provided under motor parameter and load torque variations. It is clearly demonstrated that the proposed adaptive regulator can accurately control the speed of permanent magnet synchronous motors.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권4호
• /
• pp.220-227
• /
• 2005

This paper presents hybrid artificial intelligent(HAI) controller based on the vector controlled IPMSM drive system. And it is based on artificial technologies that adaptive neural network fuzzy(A-NNF) is to speed control and artificial neural network(ANN) is to speed estimation. The salient feature of this technique is the HAI controller The hybrid action tolerates any inaccuracies in the fuzzy logic assignment rules or in the neural network stationary weights. Speed estimators using feedforward multilayer and artificial neural network(ANN) are compared. The back-propagation algorithm is easy to derived the estimated speed tracks precisely the actual motor speed. This paper presents the theoretical analysis as well as the simulation results to verify the effectiveness of the new hybrid intelligent control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.329-331
• /
• 2001

This paper representes a realization of a fuzzy logic speed controller for BLDC motor drives. Fuzzy sets are regulated by using parameters of BLDC motor. Simplified reasoning methods are used for defuzzification. Fuzzy logic speed controller is designed by using the high performance of DSPchip (TMS320F240). By experiment, it is confirmed that the speed of BLDC motor well follows an command speed in the load variables or low-speed area.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.67-72
• /
• 2001

In this study, a methodology of synchronous control which can be applied to position synchronization of a two-axes driving system has been developed. The synchronous error is caused by model uncertainties and torque disturbance of each axis. To overcome these problems, the proposed synchronous control system has been composed of two speed controllers, disturbance observers, and one synchronous controller. The speed controllers, based on the PID control law are aimed at the following to speed reference. And the parameters of speed controllers have been designed in order for the speed response fo the second axis to correspond with the one of the first axis. The disturbance observer has been designed to restrain the torque disturbance. The synchronous controller eliminates the synchronous error by controlling the speed of the second axis. The effectiveness of the proposed method has been verified through simulation.