• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.388-390
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed Induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.998-1001
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• 한국철도학회논문집
• /
• 제8권3호
• /
• pp.216-221
• /
• 2005

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the wright of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control based on disturbance observer and sensor-less vector control. The numerical simulation and experimental results point out that the proposed re-adhesion control system has the desired driving wheel torque response for the tested bogie system of electric coach. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.140-143
• /
• 1991

This paper describes a compensation method for the rotor resistance variation of induction machines in speed sensor-less vector control system using MRAS(model reference adaptive system). In case of rotor resistance variation, the analysis of the conventional speed sensor-less vector control system using MRAS is presented and the compensation method for rotor resistance variation using Fuzzy logic is proposed. In order to confirm the performance of the proposed algorithm, computer simulation is performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.891-894
• /
• 2004

This paper estimate coefficient of adhesion through speed sensor-less vector control and load torque disturbance observer used for maximum tractive force control. And also proposes anti-slip control algorithm, which controls torque force of motor in order to keep the estimated adhesion force in maximum adhesion by controlling PI torque with the differential value of estimated adhesion force coefficient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.326-331
• /
• 1990

In the vector-controlled induction machine drive, mechanical sensors restrict the wide applications of high performance AC drives. So in resent years, many papers have been presented which doesn't need mechanical sensors, named by sensorless vector control. But sensorless control has a few serious problem, one of which Is poor speed estimation in case of incorrect rotor resistance (Rr) information. This paper describes the stator flux orientation speed control strategy with the speed estimation algorithm. and the method of adapting Rr change due to thermal heating. By proposed method. We can acquire precise speed estimation and higher performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.334-340
• /
• 2002

This paper proposes a new anti-slip re-adhesion control system fur electric railway vehicle driven by inverter-fed induction motors. This paper introduces an instantaneous tangential farce coefficient estimator between driving wheel and rail, which is based on disturbance observer. The torque command of proposed system regulates to exceed this estimated tangential farce coefficient in order to avoid undesirable slip phenomenon of driving wheels. We have already proposed the anti-slip re-adhesion control system based on disturbance observer for simplified one wheel equivalent model successfully. This paper extend to this system to the actual bogie system, which has four driving wheels driven by two induction motors fed by one inverter. In order to apply anti-slip re-adhesion control to the actual bogie system a new anti-slip re-adhesion control based on both disturbance observer and speed sensor-less vector control of induction motor with quick response are combined. The experimental results and the numerical simulation results prove the validity of the proposed control system.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.91-102
• /
• 1999

The paper describes a robust adaptive control algorithm for induction motor drive without speed sensor at low speed range. The control algorithm use only current sensors in a space vector pulse width modulation within loop control with rotor speed estimation and voltage source inverter. On-line rotor speed estimation is based on utilizing parallel model reference adaptive control system. MRAC of the modified flux model for flux and rotor speed estimator uses dual-adaptation mechanism, ${\omega}_r$ and ${\omega}_e$ scheme. The estimated flux components in the model can be compensated from the effects of offset errors on pure integrals. It can be compensated to the parameter variations and torque fluctuation with speed estimation in less then 10 rad/sec. In a simulation, the proposed induction motor control algorithm without speed sensor at very low speed range are shown to operate very well in spite of variable rotor time constant and fluctuating load without change the controller parameters. The suggested control strategy and estimation method have been validated by simulation study, and it proposed the designed system for the implementation using TI320C31 DSP/ASIC controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.857-859
• /
• 2004

This paper presents design of speed control system for slot less air-cored PM linear synchronous motor using space vector PWM. The vector control requires information about rotor position. And we can need to the Hall sensor for sampling current. In order to agree with this purpose, Digital Signal Processor(TMS320F2406A) developed for implementation of a speed Field Oriented Control.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.398-404
• /
• 2021

본 논문에서는 영구자석형 동기전동기의 벡터제어를 수행하는데 필요한 회전자의 위치, 특히 기동시의 초기 회전자 위치를 정확하게 검출하기 위하여 자기식 위치 센서를 사용하는 방법을 제안한다. 기존에는 홀센서의 출력 신호를 사용하여 초기 회전자의 위치를 판단하거나 이러한 센서를 사용하지 않는 센서리스 방식으로 제어를 수행하였으나 이 방법들은 위치 오차가 발생하고 정확도가 떨어지기 때문에 실용성 측면에서 만족스럽지 못하였다. 이와 같은 문제점을 해결하고자 본 논문에서는 자기식 위치 센서(magnetic position sensor)를 사용하여 초기 회전자의 위치를 검출하고자 한다. 이 방식을 사용하여 동기전동기의 초기 회전자 위치 검출이 부정확하여 벡터제어 시스템에서 전동기의 기동특성이 나빠지는 문제점을 해결하며, 소용량의 벡터제어 인버터를 저가격화하는 목적으로 자기식 위치 센서를 속도 및 위치 검출에 사용함으로써 자극 검출용의 홀센서와 회전속도 측정용의 로터리 엔코더를 하나로 통합하여 가격을 절반 이하로 낮추는 방안을 제안한다.