• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.58-67
• /
• 2003

Welding characteristics of austienite 304 stainless and SM45C using a continuous wave Nd:YAG laser n experimentally investigated Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much Inter than those involved in conventional welding processes, leading to a rather small weld zone. Experiments are performed for 304 stainless steel plates changing several process parameter such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between the similar and dissimilar and plates, etc. The Nd:YAG laser welding process is one of the most advanced manufacturing technologies owing to its high speed and penetration. This paper describes the weld ability of SM45C carbon steel for machine structural use by Nd:YAG laser. The follow conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.31-36
• /
• 2020

An investigation was conducted to determine whether the ratio of the fluid to the charged particles affects the panel reflexibility rate and the drifting current flowing in the panel, in electrophoretic-based electronic paper. In this regard, three panels were produced in this study with the ratio of the charged particles to the fluid set as 1:5, 1:1, and 5:1. Each sample was driven using an identical input pulse, for which the current flowing in the panel and the output voltage of the photodiode were measured for the panel reflexibility rate. Consequently, the drifting current initially exhibited a peak value and a saturated value at a later point. This value was proportional to the ratio of the charged particles, and it was similar to this ratio when it is higher than 1:1. The output voltage of the photodiode due to the panel reflexibility rate was proportional to the ratio of the charged particles. However, the response speed decreased if the ratio was higher than 1:1. It is expected that the results of this study will contribute to the analysis of the charging of charged particles in electrophoretic-based electronic paper, and the selection of an appropriate concentration.

• Archives of Pharmacal Research
• /
• 제18권5호
• /
• pp.314-319
• /
• 1995

Antacid granules were prepared by agglomeration and powder method in high speed agitation type granulator. The copmositions of the test antacids were sodium bicarbonate nad magnesium carbonate nad a coating material was powder of polyvinylacetal diethyl-aminocacetate (AEA) and an additive material was talc powder. The dissolution characteristics of base from the antacid granules were investigated to evaluate neutralization capacity of hydrochloric profile of base and neutralization behavior, the following results were obtained : The prepared granules showed a pH-dependent dissolution pattern of a base. The dissolution profile of a base was varied with addition of talc powder as well as coating amount of AEA. The relationship between the ratio of dissolution retarded time for 20% and 10% AEA. The relationship between the ratio of dissolution retarded time for 20% AEA coated granules $\theta_{20}/\theta_{10}$ and the diameter reduction of the granules was explained by the rate process of neutralization of hydrochloric acid.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2002

$WC-3%(Cr_3C_2)-2%(Mo_2C)-12%Ni$ carbides were ground with three different types of electroplated diamond wheels with respect to grain friability. The grinding ratio in the case of the highest toughness grains, A becomes the highest at the workpiece speeds of 40 and 70mm/min exhibiting larger effect with smaller workpiece speed. The grinding ratio with the medium toughness grain is higher than that of grain A at higher workpiece speeds than 100mm/min. The surface roughness becomes smaller with increasing the grain friability The increasing rate on surface roughness with the increase of workpiece speed becomes higher with using the grain of lower friability.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4149-4155
• /
• 2013

더 빠른 절삭속도와 이송속도를 위한 고속가공은 표면품위와 재료제거율의 증가를 초래한다. 이 논문은 고속가공을 위한 정면밀링커터를 사용한 가공에서 획득된 진동특성에 관한 절삭조건의 영향을 연구하였다. 이 논문에서, 직교배열 테이블에 기초한 다구찌 실험계획법은 고속 정면밀링커터를 사용한 진동특성을 연구하기 위해 적용되었다. 실험조건은 직교배열 $L_{27}(3^{13})$ 을 사용하였다. 실험의 계획과 분석은 S/N비(신호 대 잡음비)와 분산분석을 이용하여 진동에 관한 절삭조건의 영향을 연구하기 위해 수행되었다. 절삭 파라미터 즉 이송속도, 챔퍼길이, 절삭속도 그리고 절삭깊이는 진동 특성치를 고려하여 최적화 되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권4호
• /
• pp.548-552
• /
• 2001

This study was designed to find optimum conditions of four different factors (ratio of solvent to cholesterol-$\beta$-cyclodextrin complex, mixing speed, mixing temperature, and mixing time) for cholesterol dissociation in cream. Using the ratio of 6 to 1 (solvent to the complex) showed the highest cholesterol dissociation rate (82.50%) when mixed at 100 rpm at $50^{\circ}C$ for 1 h. Mixing speed did not significantly affect the cholesterol dissociation. Also, mixing time appeared to be insignificant. The optimum mixing temperature was $50^{\circ}C$ and mixing at $40^{\circ}C$ resulted in a significantly lower rate, compared with that at $50^{\circ}C$. In a subsequent experiment, using recycled $\beta$-cyclodextrin only showed 75.07% of cholesterol removal in cream, while the mixture of recycled to unused $\beta$-CD with the ratio of 6 to 4 increased cholesterol removal to 95.59%, which is highly close to that of 100% unused $\beta$-CD.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.88-94
• /
• 2005

A swirl ratio of a charge in the cylinder could be calculated by measuring both the rotary speed of paddle and the intake air flow rate in the swirl measurement apparatus fur several positions of valve lift. The automation of the swirl ratio measurement for a cylinder head is achieved by controlling both the valve lift of cylinder head and a suction pressure of the surge tank, instead of controlling them manually. PID control of the surge tank pressure and positioning a valve lift of the cylinder head are also achieved by using two step motors, respectively. Rotating speed of a paddle are measured using an optical sensor and a counter. Flow rate are measured from ISA 1932 flow nozzle by reading a differential pressure gauge position using IEEE-1394 camera. Time to measure the swirl ratio for a port in the cylinder head is drastically reduced from an hour to 3 minutes by automation control of the apparatus.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.202-207
• /
• 2007

In order to understand the phenomena of combustion instability, an experimental study was conducted at the moderate pressure and ambient temperature conditions. The flame behavior and the pressure fluctuations were measured in a dump combustor. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The fluctuation of pressure, heat release and equivalence ratio were measured by piezoelectric pressure sensor, high speed Intensified Charge Coupled Device (HICCD) camera and gas chromatography respectively. Two representative modes were self-excited pressure oscillations at the resonance of combustion chamber (200Hz) and instabilities related to the modulated fuel flow rate through the fuel holes (10Hz). It is found that, especially in an unchoked fuel flow condition, the modulation of the fuel flow rate affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.85-94
• /
• 2005

이 논문은 무선 네트워크에서 핸드오프 호 블록킹 확률을 만족하면서 신규 호 블록킹을 감소시키기 위하여 속도 적응 우선순위 알고리듬과 트래픽 제어모델을 제안하였다. 전체 트래픽에서 핸드오프 호 발생 비율이 신규 호 발생 비율보다 적을 때 가용채널을 이용하기 위하여 이 방법을 제안하였다. 임계치 이전의 가드채널은 핸드오프 호 블록킹 확률을 보장해 주고, 임계치 이후의 가드채널에서는 우선순위가 높은 신규 호나 핸드오프 호를 할당해 줌으로써 기존의 고정된 가드채널 방식에 비해 신규 호를 보장해줄 수 있다.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.24-30
• /
• 2021

In this study, PET containing 3% silver ion-exchange zeolite was mixed with cotton in a ratio of 6:4 to prepare a spun yarn to evaluate the tensile strength, absorption speed, absorption rate, antibacterial property, and the efficiency of deodorization. As a result, the following conclusions were obtained. First, it can be confirmed that silver ion exchange zeolite is evenly distributed inside and on the surface of the antimicrobial PET-SF through SEM. It was found that the tensile strength between the CVC sample mixed with silver ion zeolite PET and cotton and the normal cotton 100% sample was slightly lower in the CVC sample. Although the absorption speed and water absorption rate were measured to find out the moisture characteristics, it was confirmed that there was no significant difference. The contact angle was slightly larger in the antimicrobial CVC sample, but the time it took for the moisture to completely penetrate into the knit fabric was 0.85 seconds. In addition, it was found that out of the total mixing ratio, 40% of antibacterial PET was spun with regular cotton to produce yarn, which had an excellent bacteria reduction rate of 99.9% and a deodorization efficiency of 85%.