• 한국전문물리치료학회지
• /
• 제10권1호
• /
• pp.77-95
• /
• 2003

Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. However, speed has not been taken into account in foot kinematics and kinetics during walking. This study examined the effect of walking speed on foot joint motion and peak plantar pressure during the walking phase. Eighty healthy subjects (40 men, 40 women) were recruited. Maximal dorsiflexion and excursion were measured at the first metatarsophalangeal joints during walking phase at three different cadences (80, 100, and 120 step/min) using a three dimensional motion analysis system (CMS70P). At the same time, peak plantar pressure was investigated using pressure distribution platforms (MatScan system) under the hallux heads of the first, second, and third metatarsal bones and heel. Maximal dorsiflexion and excursion and excursion at the ankle joint decreased significantly with increasing walking speed. Peak plantar pressure increased significantly under the heads of the first of the first, second, and third metatarsal bones, and heel with increasing walking speed: three was no change under the hallux. There were no significant changes in maximal dorsiflexion or excursion at the first metatarsophalangeal joint. The results show that walking speed should be considered when comparing gait parameters. The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot.

• 한국레이저가공학회지
• /
• 제10권3호
• /
• pp.25-32
• /
• 2007

The effect of welding speed on the weldability, microstructures, hardness, tensile property of Nd:YAG laser welding joint in 600MPa grade precipitation hardening high strength steel was investigated. A shielding gas was not used, and bead-on-plate welding was performed using various welding speeds at a power of 3.5kW. Porosity in the joints occurred at 1.8m/min, but were not observed over the welding speed of 2.1m/min. However, spatter occurred over the welding speed of 6.6m/min. The hardness was the highest at heat affected zone(HAZ) near fusion zone(FZ), and was decreased on approaching to the base metal. The maximum hardness increased with increasing welding speed. The microstructure of FZ was composed of coarse grain boundary ferrite and bainite(upper) but the HAZ near the FZ contained bainite(Lower) and fine ferrite at a low welding speed. With increasing welding speed, ferrite at the FZ and the HAZ became finely and upper binite changed to lower bainite. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal, and the tensile strength and the yield strength of joints was equal to those of raw material. Elongation was found to be lower than that of the raw material.

• 한국전문물리치료학회지
• /
• 제12권2호
• /
• pp.28-36
• /
• 2005

The purpose of this study was to investigate the effects of the increasing ankle range motion program on ambulation and balance for the elderly with balance disorder. Eighteen elderly subjects were administered with a timed test twice; approximately 4 weeks apart. The exercise group participated in a fall prevention exercise class at the Y.S. Senior Welfare Center of the Seoul Metropolitan Government. The session consisted of a stationary cycle, static stretching ankle joints, balance boards, and progressive resistive exercises using the Thera-band. The results were as follows: Firstly, the increasing ankle range of motion program was effective on the exercise group. Gait-speed was improved (p<.005). Secondly, balance was significantly improved (p<.000). Thirdly, increasing ankle range of motion program was effective in ankle dorsiflexion which was the major risk factor for falls among the elderly. Differences in gait and balance between the groups were examined using a paired t-test (p<.05). The exercise group demonstrated significantly higher values of gait-speed, ankle range of motion, and balance when compared with the non-exercise group. The results of this study suggest that the increasing ankle range of motion program is an effective intervention for the elderly with balance disorder.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.24-29
• /
• 2000

This paper is experimental study of machining characteristics about martensitic heat resisting steel STR11. Machining characteristics are different according to internal quality(chemical compositions, microscopic structure and nonmetallic inclusion) mechanical properties(tensile strength value impact value and hardness) and dynamic cutting force. Following are the results : 1. In analyzing internal quality test materials have typical martensite structure and a minute needle-shaped structure. 2. Tensile strength and reduction of area and hardness are larger. But values of elongation and impact values are smaller. Fracture surface of tensile specimen is ductile. 3, Cutting force is decreasing with cutting speed increasing 4. Cutting force is increasing with feed speed increasing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.966-969
• /
• 1998

Fast burning achieves higher efficiency, and reduces cycle variations which is able to improve vehicle driveability. Furthermore, the greater resistance to knock with fast burning can allow the fuel economy advantages associated with higher compression ratio to be realized. One way of increasing the combustion speed is to enhance the performance of ignition systems which were able to reduce the early period of combustion. It is well known that shortening the initial stage of combustion also reduces the cyclic variations. This literature survey deals with the papers which have studied the ignition process or various ignition systems. Those systems increasing the combustion speed, extending the lean misfire limit, reducing the exhaust gas and stabilizing the operating condition of the spark ignition engine by modifying the ignition process or increasing ignition energy.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.463-468
• /
• 2002

This study investigates the variations of shear force, displacement, and fracture surface with the shear speed and the number of reflows. The experimental data of shear tests indicate that the shear force increases as increasing the number of reflows and the shear speed due to the formation of a kind of intermetallic compound, Ni$_3$Sn$_4$, on Au/Ni/Cu pad, and the work-hardening. However, general trends show that the shear force decreases due to increasing the thickness of the intermetallic compound over 4x reflow. It is observed that the intermetallic compound which is formed between solder and pad increases according to increasing the number of reflows, and the growth rate of the intermetallic compound at central region on the interface is faster than one at edge part. The general tendencies of shear force and displacement with different shear speeds are almost identical as an increase of the number of reflows.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.668-673
• /
• 1997

A Single-crystalline Mn-Zn Ferrite (110 orientation) was masklessly etched by focused Ar laser irradiation in an H$_3$PO$_4$ solution. The depth of the etched grooves increases with increasing a laser power, decreasing a scan speed, and increasing the H$_3$PO$_4$concentration. The width of the etched grooves increases with a increasing laser power, but was relatively insensitive to the scan speed and H$_3$PO$_4$concentration. High etching rate of up to 714 ${\mu}{\textrm}{m}$/s and an aspect ratio of 6 for vertical slab structure have been obtained by the light-guiding effect of the laser bean in the H$_3$PO$_4$ solution.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.499-507
• /
• 2020

In current study, utilizing the Kelvin's theory with polynomial, exponential and trigonometric volume fraction laws for functionally graded cylindrical shell vibrations. Effects of different parameters for ratios of length- and height-to-radius and angular speed versus fundamental natural frequencies been determined for two categories of cylindrical shells with clamped-free edge condition. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing length-to-radius ratio. Moreover, on increasing the rotating speed, the backward frequencies increases and forward frequencies decreases. The frequencies are same when the cylinder is stationary. The frequencies increases and decreases on changing the constituent materials. The frequency results are verified with the earlier literature for the applicability of present model.

• Computers and Concrete
• /
• 제28권6호
• /
• pp.559-566
• /
• 2021

In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• 한국세라믹학회지
• /
• 제22권5호
• /
• pp.43-46
• /
• 1985

Constitutional supercooling due to concentration gradient at solid-liquid interface in the melt can be avioded by increasing rotational speed for growing $LiNbO_3$ single crystals from the stoichiometric melt. Growth conditions for high quality crystals were determined by rotational speed by which other growth parameters were adjusted.