• MALSORI
• /
• v.55
• /
• pp.143-158
• /
• 2005

The adequate compression algorithm is essential to achieve high quality embedded TTS system. in this paper, we Propose waveform interpolation coder for TTS corpus compression after many speech coder investigation. Unlike speech coders in communication system, compression rate and anality are more important factors in TTS DB compression than other performance criteria. Thus we select waveform interpolation algorithm because it provides good speech quality under high compression rate at the cost of complexity. The implemented coder has bit rate 6kbps with quality degradation 0.47. The performance indicates that the waveform interpolation is adequate for TTS DB compression with some further study.

• MALSORI
• /
• no.61
• /
• pp.75-86
• /
• 2007

In this paper, we propose a scalable audio coder, which has a variable bandwidth from the narrowband speech bandwidth to the audio bandwidth and also has a bit-rate from 8 to 320 kbits/s, in order to cope with the quality of service(QoS) according to the network load. First of all, the proposed scalable coder splits bandwidth of the input audio into narrowband up to around 4 kHz and above. Next, the narrowband signals are compressed by a speech coding method compatible to an existing standard speech coder such as G.729, and the other signals whose bandwidth is above the narrowband are compressed on the basis of a psychoacoustic model. It is shown from the objective quality tests using the signal-to-noise ratio(SNR) and the perceptual evaluation of audio quality(PEAQ) that the proposed scalable audio coder provides a comparable quality to the MPEG-1 Layer III (MP3) audio coder.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.443-451
• /
• 2003

Since a codebook-based CELP coder models its excitation signal according to one of several bit rates pre-assigned to codebooks and synthesizes speech signal using codebooks, it can not support encoding of speech signal at an arbitrary bit rate in one encoder. The proposed variable bit rate speech coder encodes the excitation signal based on the bit rate assigned to a present frame of speech using one-dimensional SPIHT and wavelet transform. Also it does't need to model excitation signal (or codebook) to some types as CELP coder, and can encode excitation signal at various bit rates without exact pitch information according to user requirement. As a result, since the coder doesn't have a codebook structure, it has relatively low coder complexity and provides equal or better speech quality compared to G.729 and G.723.1 coder.

• Speech Sciences
• /
• v.10 no.2
• /
• pp.65-75
• /
• 2003

This paper describes the issues associated with the real-time implementation of G.723.1A dual-rate speech coder on a TMS320VC5402 DSP. Firstly, the main features of the G.723.1A speech coder and the procedure involved in the implementation using assembly and C languages are discussed. Various real-time implementation issues such as memory/MIPS tradeoffs are also presented. For fixed-point implementation, we converted the ITU-T fixed-point ANSI C code into TMS320VC5402 code in the bit-exact way through verification using the test vectors. Finally, as the result of implementation, we present the MIPS and memory requirement for the real-time operation.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.24-30
• /
• 1999

In this paper, we propose a weighting dependent mixed source model (WD-MSM) coder that is an improved version of a CELP-based mixed source model (C-MSM) coder. The coder classifies speech segments into three types : voiced, unvoiced and mixed. The excitation for a voiced frame is an adaptive source, and the excitation for an unvoiced frame is a stochastic source. The coder has a modified mixed source for a mixed frame. We apply different weighting functions for three classes. Simulation results show that the proposed coder at 4 kbits/s yields very good performance both subjectively and objectively.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.52-57
• /
• 2005

The adaptive multirate wideband (AMR-WB) speech coder has an extended audio bandwidth from 50 Hz to 7 kBz and operates on nine speech coding bit-rates from 6.6 to 23.85 kbit/s. In this Paper, we present the real-time implementation of AMR-WB speech coder using 16bit fixed-point TMS320C5509 that has dual MAC units. Firstly, We implemented AMR-WB speech coder in C 1anguage level using intrinsics, and then performed optimization in assembly language. The computational complexity of the implemented AMR-WB coder at 23.85 kbit/s is 42.9 Mclocks. And this coder needs the program memory of 15.1 kwords, data ROM of 9.2 kwords and data RAM of 13.9 kwords.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.88-96
• /
• 2010

We propose the efficient channel coding method combined with a 2.4kbps speech coder. The code rate of a channel coder is given by 1/2 and 1/2 rate convolutional coder is obtained from the punctured convolutional coder with rate of 1/3. The punctured convolutional coder is used for a variable rate allocation. The puncturing method according to the importance of the output data of the source encoder is applied for the convolutional coder. The importance of output data is analyzed by evaluating the bit error sensitivity of speech parameter bits. The performance of proposed coder is analyzed and simulated in Rayleigh fading channel and AWGN channel. The experimental results with 2.4kbps EHSX coder show that the variable rate channel coding method is superior to non-variable channel coding method from the subjective speech quality.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.484-490
• /
• 1990

In speech coding scheme, because information bits have different error sensitivities over channel errors, the channel coder for combining with speech coding should be realized by the variable coding rate considering the bit importance of speech information bits. In realizing the 4 kbps channel coder for 12kbps speech, this paper have chosen the channel coding method by analyzing the hard-decision post-decoding error rate of RCPC(Rate Compatible Punctured Convolutional) codes and bit error sensitivity of 12 kbps speech. Under the coherent QPSK and Rayleigh fading channel, the performance analysis has showed that 10dB gain was obtained in speech SEGSNR by 4-level uneuqal error protection, which was compared with the caseof no channel coding at 7dB channel SNR.