• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.149-159
• /
• 1989

The purpose of this study was to assess the effects of wavelength and intensity of light curing units on the curing of composite resin. The wavelength and intensity of nine units were evaluated with Optical Multichannel Analyzer and Radiometer. Two-part split stainless steel mold with a cylindrical hole-3.0mm in diameter, 6.0mm in hgieht-was prepared. After placing a Mylar strip between two parts, 100 specimens were made by inserting each of four composite resins into the mold and irradiating for 20 seconds with five light units alternatively. The curing depths were measured by scraping method and evaluated by two-way ANOVA. And Vicker's hardness measurements were made on the longitudinally sectioned surface at 0.5mm interval. The results were as follows: 1. Visilux 2 showed a narrow spectral band within the effective wavelength in initiating polymerization and the highest intensity. Translux showed the diffuse spectrum of wavelength and the lower light intensity. 2. Visilux 2 showed the highest curing effect in any composite resin and then followed by Optilux, Efos 35, Heliomat and Translux. (p < 0.01) 3. Durafill showed the deepest curing depth in any light unit and then followed by Bisfil M, Silux and Heliosit. (p < 0.01). 4. Maximum hardness values showed 0.1mm and 0.5mm under top surface and then gradually decreased with depth.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.4 no.1
• /
• pp.24-32
• /
• 1991

Cleft palate or velopharyngeal incompetence shows many disorders and disabilities affecting speech transmission. including distortion. substitution. and the nasalization of the vowels. The nasalized vowels are produced primarily by lowering of the velum. resulting in opening a side passage for the air flow through the nasal cavity. These abnormal movements give rise to complex modification of the physical property of the sound or in the sound spectrum. The authors employed Sonagraph$^{\circledR}$ as a sound analyzer in order to ascertain the features which characterize the nasalization of vowels. Twenty healthy Korean male adult voluteers were analyzed in artificial conditions of anterior and posterior nasal obstruction. and velo-pharyngeal incompetence. The results were as follows : 1) Fundamental frequency was not changed by nasal obstruction or velopharyngeal incompetence. 2) There was no significant difference of the formant intensity between normal and nasal vowels. 3) In VPI, a decrease of the frequency of $F_2$ was observed in /e/ and /i/ vowels(p<0.001). 4) In VPI, the $F_2$ was frequently missed in /o/ and /u/ vowels. 5) In the consonant spectra of VPI, the 'release burst' was usually not observed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.9
• /
• pp.702-708
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF). However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the errors. This paper makes clear the relation between the errors of FRF and the length of recording time. A new method is suggested to reduce the errors of FRF in this paper. Several numerical examples for 1-dof model are carried out to show the property of the errors and the validity of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.187-195
• /
• 1999

A series feedback DRO operating at 3.2 GHz applicable to the spectrum analyzer as the second local oscillator, is designed and fabricated. We can obtain a low noise by utilizing the small signal S-parameter of the transistor and adjusting the reflection coefficient from the coupling coefficient between dielectric resonator and microstrip line. The results show that output power is 10.50 dBm, a stable low phase noise is -116 dBc/Hz at a 10 kHz offset frequency and a harmonic characteristic is 19.33 dBc.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.401-406
• /
• 2007

In this paper, we fabricated the polymer waveguide type surface plasmon resonance (SPR) sensor using a white light source and optical spectrum analyzer (OSA). Fabricated sensor uses the principle of phase matching between evanescent wave and surface plasmon wave. According to the measuring result, the shift of resonance wavelength conducts the change of the refractive index. The proposed SPR sensor is expected to apply the integrated multichannel SPR sensor and the realtime monitoring system.

• Journal of the Korean Chemical Society
• /
• v.62 no.6
• /
• pp.427-432
• /
• 2018

The reaction of [$[Ni(L)]Cl_2{\cdot}2H_2O$ (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[$14,4,0^{1.18},0^{7.12}$]docosane) with 1,1-cyclohexanediacetic acid ($H_2cda$) yields mononuclear nickel(II) complex, [$Ni(L)(Hcda^-)_2$] (1). This complex has been characterized by X-ray crystallography, electronic absorption, cyclic voltammetry and thermogravimetric analyzer. The crystal structure of 1 exhibits a distorted octahedral geometry with four nitrogen atoms of the macrocycle and two 1,1-cyclohexanediacetate ligands. It crystallizes in the triclinic system P-1 with a = 11.3918(7), b = 12.6196(8), $c=12.8700(8){\AA}$, $V=1579.9(2){\AA}^3$, Z = 2. Electronic spectrum of 1 also reveals a high-spin octahedral environment. Cyclic voltammetry of 1 undergoes one wave of a one-electron transfer corresponding to $Ni^{II}/Ni^{III}$ process. TGA curve for 1 shows three-step weight loss. The electronic spectra, electrochemical and TGA behavior of the complex are significantly affected by the nature of the axial $Hcda^-$ ligand.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.296-301
• /
• 1995

A single-mode erbium-doped fiber laser is constructed by using a intracore fiber Bragg grating and a unidirectional fiber loop mirror. The laser cavity is designed in such a way that the laser beam forms a travelling wave in the gain medium by placing the erbium-doped fiber inside the unidirectional loop and that the wavelength-selective feedback is made from the outside of the loop by a fiber grating with 0.2 nm reflection linewidth. An additional fiber ring resonator is constructed and used as an optical spectrum analyzer to observe the variation of the laser mode spectra. As the result, relatively stable single mode, single polarization output is observed for the most of the time except some mode hoppings in minute scale due to enviommental temperature variations. tions.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.324-330
• /
• 1995

Stimulated Brillouin scattering theory is described in an optical fiber. Frequency change with an optical heterodyne method is analyzed between reference signal of a source and stimulated Brillouin scattering signal in an optical fiber. By coupling a source with a few axial modes and an optical fiber ring resonator, Brillouin scattering is studied with a spectrum analyzer. Using reference beating signal of a source, we have reduced the Brillouin beating frequency from 13 GHz range to below GHz. Experimentally, we can see the Brillouin beating frequency from 13 GHz range to below GHz with a dispersion shifted fiber (1.32 GHz), Ti-doped fiber (900 MHz) and single mode optical fiber (870 MHz). MHz).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.143-150
• /
• 2004

In this paper, resonant ultrasound spectroscopy(RUS) was used to determine the natural frequency of a ceramic ferrule and a ball lens. The ceramic ferrules are cylinderical shape with $\phi$ 2.56mm diameter and l0mm in length. Crack lengths of these ferrules are 10.40$\mu$m, 21.18$\mu$m and 32.35$\mu$m. The spherical ball lens was made of BK-7 glass, one's diameter in 2mm and 5mm. RUS system is consisted of spectrum analyzer, power amplifier, PZT sensor and support frame. The principle of RUS is that the mechanical resonant frequency of the materials depends on density and the coefficient of elasticity. Rus system is based on that given resonant frequency of the materials can be represented by the function of density and the coefficient of elasticity, and it is applied to excite specimen and to inspect the difference of natural frequency pattern between acceptable specimen and defective ones. Defect evaluation by RUS are performed to investigate the natural frequency measure of ferrule and ball lens.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.157-164
• /
• 2008

Partial discharge were simulated by conductive particle which could be easy accumulated charge and concentrated electric field in the model GIS. Radiated electromagnetic waves were measured and analyzed by using spectrum analyzer and antenna ($30{\sim}2000[MHz]$) for measurement of EMI EMC in accordance with occurrence and propagation of partial discharge. This paper suggested the other method of detecting and estimating of partial discharge for insulation diagnosis of GIS being conductive particle by measurement and analysis of radiated electromagnetic waves. From results of this study, it was confirmed that if the suggested method should be used for the diagnosis of insulation in the model GIS being conductive particle, detecting partial discharge and estimating discharge propagation will be possible.