• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.62-67
• /
• 2021

We have experimentally demonstrated sum-frequency generation (SFG) in a periodically poled lithium niobate (PPLN) crystal, using a mode-locked picosecond-pulsed fiber laser and a continuous-wave (CW) diode laser with a narrow linewidth. The mode-locked fiber laser had a center wavelength of 1560.7 nm and a spectral width of 1.1 nm, and the CW diode laser had a center wavelength of 1551.0 nm and a spectral width of 6 MHz. To effectively realize SFG, both of the spatial modes of the two lasers were made to overlap in the PPLN crystal by using a single-mode optical fiber. The pulse-mode SFG with pulsed- and CW-mode lasers was successfully observed in the spectral and time domains. These results are expected to be applicable in various ways, such as optical frequency measurement and high-resolution laser spectroscopy studies using optical frequency combs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.35-45
• /
• 2018

Image data collected by an airborne hyperspectral camera system have a great usability in coastal line mapping, detection of facilities composed of specific materials, detailed land use analysis, change monitoring and so forh in a complex coastal area because the system provides almost complete spectral and spatial information for each image pixel of tens to hundreds of spectral bands. A few approaches after classifying by a few approaches based on SAM(Spectral Angle Mapper) supervised classification were applied for extracting optimal land cover information from hyperspectral images acquired by CASI-1500 airborne hyperspectral camera on the object of a coastal area which includes both land and sea water areas. We applied three different approaches, that is to say firstly the classification approach of combined land and sea areas, secondly the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas, and thirdly the land area-only classification approach using atmospheric correction images and compared classification results and accuracies. Land cover classification was conducted respectively by selecting not only four band images with the same wavelength range as IKONOS, QuickBird, KOMPSAT and GeoEye satelllite images but also eight band images with the same wavelength range as WorldView-2 from 48 band hyperspectral images and then compared with the classification result conducted with all of 48 band images. As a result, the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas is more effective than classification approach of combined land and sea areas. It is showed the bigger the number of bands, the higher accuracy and reliability in the reclassification approach referred above. The results of higher spectral resolution showed asphalt or concrete roads was able to be classified more accurately.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.792-799
• /
• 1994

The spectral changes of 3,3'-diethyl oxacarbocyanine(DOC) in the aqueous solution and in the presence of polyacrylic acid(PAA) were studied by means of absorption and fluorescence spectroscopy. The spectral change of DOC in the aqueous solution with concentration changes is attributed to the formation of dimer. In the presence of PAA, the characteristic changes of metachromatic band with changes of P/D (the ratio between available binding site and the dye concentration) are found and the discussions are made in terms of stacking theory. A kinetic study of the interaction between DOC and PAA was also investigated by the absorption and fluorescence stopped-flow spectroscopy. The observed relaxation effect in PAA-DOC system can be described quantitatively by assuming two relaxation processes occur.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.167-180
• /
• 2011

Recently, 3-D audio technologies are commonly implemented through headphones. A major problem of the headphone-based 3-D audio is in-the-head localization, which occurs due to the inaccurate Head-Related Transfer Function (HRTF). Since the individual measurements of HRTFs are impractical, there have been several researches for HRTF customization. In this paper, an efficient method of customizing HRTFs for the sound externalization is proposed. Firstly, it is determined which part will be customized in HRTF through psychoacoustical experiments. Then, the method controlling spectral notches and envelopes to provide individual localization cues are described. Since the proposed method is based on a critical-band rate, the structure is much simpler than that of previous studies, but still effective. The performance was evaluated through a series of subjective tests, and the results confirmed that the customized HRTF using proposed method could replace the measured individual HRTF successfully.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2020

Wind tunnel tests were conducted to analyze the wind fluctuating pressures on a circular closed and open dome roof with a low span rise. Two dome models with various geometric parameters (height/span ratios and open ratios) were used for fixed span rise ratio dome and wind pressure spectrum were analyzed. The applicability was examined in comparison with the spectral model proposed in the previous studies. The analysis results show that the wind pressure spectrum of open dome roof tends to increase power in the high frequency range and the second peak is found in the area different from the closed dome roof. In addition, according to the comparison analysis with the previous proposed spectral model, it was found that it is not applicable to the closed and open dome roofs with low rise ratio due to the different peak frequencies.

• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.29-36
• /
• 2003

Quiescent solar radiation, at microwave spectral regime, is dominated by gyroresonant and thermal Bremsstrahlung radiations from hot electrons residing in solar active region corona. These radiations are known to provide excellent diagnostics on the coronal temperature, density, and magnetic field, provided that spatially resolved spectra are available from observations. In this paper we present an imaging spectroscopy implemented for a bipolar active region, AR 7912, using the multifrequency interferometric data from the Owens Valley Solar Array (OVSA), as processed with a new imaging technique, so-called Spatio-Spectral Maximum Entropy Method (SSMEM). From the microwave maps at 26 frequencies in the range of 1.2-12.4 GHz at both right- and left-circular polarizations, we construct spatially resolved brightness spectra in every reconstructed pixel of about 2 arcsec interval. These spectra allowed us to determine 2-D distribution of electron temperature, magnetic field of coronal base, and emission measure at the coronal base above the active region. We briefly compare the present result with existing studies of the coronal active regions.

• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.7-21
• /
• 2003

The state-of-art third generation wave prediction model WAM was applied to the Korean seas for a winter monsoon period of January 1997. The wind field used in the present study is the global NSCAT-ERS/NCEP blended winds, which was further interpolated using a bi-cubic spline interpolator to fine grid limited area shallow water regime surrounding the Korean seas. To evaluate and investigate the accuracy of WAM, the hindcasted wave heights are compared with observed data from two shallow water buoys off Chil-Bal and Duk-Juk. A detailed study has been carried with the various meteorological parameters in observed buoy data and its inter-dependency on model computed wave fields was also investigated. The RMS error between the observation and model computed wave heights results to 0.489 for Chil-Bal and 0.417 for Duk-Juk. A similar comparison between the observation and interpolated winds off Duk-Juk show RMS error of 2.28 which suggest a good estimate for wave modelling studies.

• Speech Sciences
• /
• v.14 no.1
• /
• pp.137-147
• /
• 2007

The purpose of this study was to examine the syllable structures of ten Korean numeric sounds produced by ten students. Each sound was normalized by its maximum intensity value and divided into onset, vowel, and coda sections after finding abrupt or visible changes in energy values or cumulative values of lower spectral energy at each pulse point using four Praat scripts. Then, segmental durations and cumulative intensity values of each syllable were obtained to find a statistical summary of the syllable structure. Intensity values at 100 proportional time points were also collected to compare the ten sounds. Results showed as follows: Firstly, there was not much deviation from the grand average duration and intensity for the majority of the sounds except the two diphthongal sounds on which their boundary points varied among the speakers. Secondly, the onset point for the CV or CVC category sounds and the boundary between the vowel and the nasal or lateral sound were easy to identify, which may be automatically traced later. Thirdly, there seems some tradeoff among the sections maintaining the same total duration per each syllable. Further studies on syllables with various onsets or codas would be desirable to make a general statement on the Korean syllable structure.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.3-9
• /
• 2009

Acoustically English vowels are defined primarily by formant values. The measurements of the values have been usually made at a few time points of the vowel segment despite the fact that the majority of English vowel formants vary dynamically throughout the segment. This study attempts to collect acoustic data of the nine English vowels published by Hillenbrand et al. (1995) online and to examine the acoustic features of the English vowels for phoneticians and English teachers. The author used Praat to obtain the data systematically at six equidistant timepoints over the vowel segment. Obvious errors were corrected based on the spectrographic display of each vowel. Results show that the first two formant trajectories are important to separate the nine vowels within the front- or back-vowel groups. The third formant trajectories appear comparable except those of the high vowels. Second, the back vowels leave longer traces on the vowel space toward the locus of the following consonant /d/. Third, each vowel has inherent duration, pitch, and intensity patterns. The results match the findings of Yang (2009). From the results, the author concludes that dynamic spectral changes are important in specifying acoustic characteristics of English vowels. Further studies on the application of the vowel trajectories to English pronunciation lessons or on perceptual experiment of synthesized vowels are desirable.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2105-2114
• /
• 2006

In this paper, a simplified model is studied to predict analytically the vibration from the helical gear system due to an axial excitation of helical gears. The simplified model describes gear, shaft, bearing, and housing. In order to obtain the axial force of helical gears, the mesh stiffness is calculated in the load deflection relation. The axial force is obtained from the solution of the equation of motion, using the mesh stiffness. It is used as a longitudinal excitation of the shaft, which in turn drives the gear housing through the bearing. In this study, the shaft is modeled as a rod, while the bearing is modeled as a parallel spring and damper only supporting longitudinal forces. The gear housing is modeled as a clamped circular plate with viscous damping. For the modeling of this system, transfer matrices for the rod and bearing are used, using a spectral method with four pole parameters. The model is validated by finite element analysis. Using the model, parameter studies are carried out. As a result, the linearized dynamic shaft force due to the gear excitation in the frequency domain was proposed. Out-of-plan displacement from the forced vibrating circular plate and the renewed mode normalization constant of the circular plate were also proposed. In order to control the axial vibration of the helical gear system, the plate was more important than the shaft and the bearing. Finally, the effect of the dominant design parameters for the gear system can be investigated by this model.