• Wind and Structures
• /
• v.9 no.5
• /
• pp.387-396
• /
• 2006

This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to compare with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.917-922
• /
• 2009

This paper presents a technique to generate road surface profiles in a spatial domain using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis. The roads in lateral direction makes the relation between the coherence of the lateral tracks. The derived road surfaces are compared to ISO(International Organization for Standardization) standards. Generated road profiles are in good agreements with the target road PSD shape and measured coherence relation.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.397-409
• /
• 2022

A model is developed for the calculation of sea surface generated ambient noise in the range dependent ocean environment. The sources are located in the horizontal plane all around and their depths are at the near-surface. The receiver array is located in the range dependent ocean waveguide. One-way coupled mode method is used to model the acoustic propagation between the sources and receiver in the range dependent waveguide, and the cross spectral density matrix of noise is derived. In simulation, noise intensity, beamforming result and coherence function are calculated from the cross spectral density matrix. These results are compared with those in the range independent environment. The modeling result shows the effect of the vertical directionality and asymmetry characteristics of the horizontal plane.

• Journal of applied mathematics & informatics
• /
• v.26 no.5_6
• /
• pp.933-943
• /
• 2008

Spectral analysis of a strictly stationary r-vector valued time series is considered under the assumption that some of the observations are missed due to some random failure. Statistical properties and asymptotic moments are derived. Asymptotic normality is discussed.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.483-488
• /
• 2004

Results on the analytic behavior of the limiting spectral distribution of large dimensional random matrices, studied in Marcenko and Pastur [2], are derived. Using the Stieltjes transform, it is shown that the limiting distribution has a continuous derivative away from zero, the derivative being analytic whenever it is positive [3]. In the present paper, it is derived that the behavior of it resembles the behavior of a square root function near the boundary of its support.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.366-371
• /
• 2003

In this paper, it was studied about the red-sensitive layer. UV-Vis data of the dye at monomeric and J-state were considered with respect to their performance(contrast, speed, density and fog) in photographic emulsion. The sensitizing effect of the dye is found to be strongly structure-dependent. Naphthctbiazolo carbocyanine dye can be used as red sensitizing dye for the spectral sensitization of photographic emulsion.

• Structural Engineering and Mechanics
• /
• v.34 no.5
• /
• pp.663-666
• /
• 2010

The spectral content of ground displacement of the 10 largest last California earthquakes is studied. Specifically, the power spectral density function of the critical horizontal-component record of the closest-to-epicenter station is analyzed in each case. The results permit to state that horizontal ground displacement is a narrow-band process. This fact was previously noticed while trying to solve the large-base-displacement problem in isolated structures and it was fundamental in the solution of this issue; however, these preliminary results were limited in number to enable a statement like the foregoing one. Thus, the broader results presented herein were necessary.

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.203-207
• /
• 2009

Electrochemical methods have been widely used to study the performances and mechanisms for the degradation of organic and inorganic coatings. In this study, EN(Electrochemical noise) measurement was applied to the protective properties and review the parameters analyzed noise signals in the time and in the frequency domain for epoxy resin based coated steels during exposure to hot sea water($40^{\circ}C$) and salt spray for 200 days. It was also found that $R_n$(Noise resistance), $R_{sn}$($f_{min}$)(Spectral noise resistance) and 2H(Hurst exponent) represented the performance of epoxy coated steels. $R_n$ can be determined as the ratio of the standard deviations of potential and current noise signals and is decreased to exposure time. Data qualities can be easily checked by PSD(Power Spectral Density) plot and $V_{psd}$, $I_{psd}$ and $R_{sn}$($f_{min}$) is useful to research the protective performances and mechanisms of coated steels. Hurst exponent represents the degradation of coated steels. But, it is difficult to directly apply the protective criterion to the evaluation of epoxy coated steels used the shipbuilding processes.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2007

In this paper, we analyze the algorithm of the methodology developed by ITU for the calculation of spectrum requirements of IMT-Advanced. We propose an approach to estimate user density using traffic statistics, and to estimate spectrum efficiencies using carrier-to-interference ratio distribution and capacity theory as well as experimental data under Korean mobile communication environments. We calculate the IMT-Advanced spectrum requirements based on the user density and spectral efficiencies acquired from the new method. In the case of spectral efficiency using higher modulation and coding schemes, the spectrum requirement of IMT-Advanced is approximately 2700 MHz. When applying a $2{\times}2$ multiple-input multiple-output (MIMO) antenna system, it is approximately 1500 MHz; when applying a $4{\times}4$ MIMO antenna system, it is approximately 1050 MHz. Considering that the development of new technology will increase spectrum efficiency in the future, the spectrum requirement of IMT-Advanced in the Korean mobile communication environment is expected to be approximately 1 GHz bandwidth.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1287-1300
• /
• 2017

Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.