• Development and Reproduction
• /
• v.10 no.4
• /
• pp.271-275
• /
• 2006

The objective of this study was to examine the early growth of haddock, Melanogrammus aeglefinus larvae from a series of reared specimens for provide information to developmental biology and more information on the aspect of aquaculture in the larvae of this species. Larvae were reared in the laboratory and sampled periodically for developmental study until 67 days after hatching. An increase in total length of fish indicated continuous growth, described by the growth expression of the type $TL=3.5374e^{0.0536X}(r^2=0.8759$, where TL is total length and X is at days after hatching) and $BW=0.0002e^{0.1858X}(r^2=0.8671$, where BW is body weight and X is at days after hatching), respectively. Pattern of body depth and pectoral fin length are instantaneous growth which expression of the type $BD=0.3545e^{0.0778X},\;r^2=0.9563$(where BD is body depth and X is at days after hatching) for body depth growth and the type $PL=0.0111e^{0.1591X},\;r^2=0.9194$(where PL is pectoral fin length and X is at days after hatching) for pectoral fin length growth. The relationship of body depth and total length expressed as $BD=0.2397X-0.5735(r^2=0.9957$, where BD is body depth and X is total length), and pectoral fin length and total length is $PL=0.1929X-1.3767(r^2=0.9882$, where PL is pectoral fin length and X is total length) pectoral fin length against body depth simultaneously recorded for juvenile haddock(PL=0.8117BD-0.9718, $r^2=0.9814$, where PL is pectoral fin length and BD is body depth). Relationship of body depth and body weight was expressed the type of $BD=-9.4734X^2+19.046X+1.3672,\;r^2=0.941$(where BD is body depth and X is body weight), and pectoral fin length and body weight expressed the type of $PL=6.379X^2+14.023X+0.3774,\;r^2=0.9494$(where PL is pectoral fin length and X is body weight). From this point view, growth characteristics of juvenile haddock in this experiment may be useful to establish a successful culture technique for rearing larval haddock.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.515-525
• /
• 2009

Clinical suggestion for the limitation of application time of NaOCl solution is needed to avoid large reductions in resin-dentin bond strength. The aim of this study was to measure the change of ${\mu}$-tensile bond strength after the various application time of 5.25% NaOCl solution to pulp chamber dentin in endodontic access cavity, and to evaluate the effect of 10% sodium ascorbate application for 10 min on bond strength after the treatment of 5.25% NaOCl solution. In this experiment, there were no statistical differences(p > 0.05) in bond strengths between upper chamber dentin and lower chamber dentin. NaOCl-treated group for 20 min did not show any significant decrease(p > 0.05) in bond strength than non-treated control group. In contrast to that, bond strengths of NaOCl-treated groups for 40 & 80 min were significantly lower(p < 0.05) than that of non-treated control group. 10% sodium ascorbate retreated group for 10 min after 5.25% NaOCl application for 40 min to chamber dentin showed the recovery of bond strength significantly. However, the bond strength of sodium ascorbate retreated group after 5.25% NaOCl application for 80 min was still significantly lower(p < 0.05) compared to the non-treated control group, which means the reductions in resin-dentin bond strength were not fully reversed. On the contrary, sodium ascorbate retreated group after 5.25% NaOCl application for 5 min showed significantly higher(p < 0.05) bond strength compared to the control group, which demonstrates its superior recovery effect. In SEM exminations of specimens retreated with 10% sodium ascorbate after NaOCl application for 40 & 80 min showed that resin tags were formed clearly and densely, but weakly in density and homogeneity of individual resin tag compared to the control specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.47-56
• /
• 2020

In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2009

Diabetes Mellitus (DM) is a syndrome accompanied with the abnormal secretion or function of insulin, a hormone that plays a vital role in controlling the blood glucose level (BGL). Type land 2 DM are most common form and the prevalence of the latter is recently increasing, The aim of this article was to assess whet her Type 2 DM could act as a predisposing risk factor on the pulpo-periapical pathogenesis. Previous literature on the pathologic changes of blood vessels in DM was thoroughly reviewed. Furthermore, a histopathologic analysis of artificially-induced periapical specimens obtained from Type 2 diabetic and DM-resistant rats was compared. Histopathologic results demonstrate that the size of periapical bone destruction w as larger and the degree of pulpal inflammation was more severe in diabetic rats, indicating that Type 2 D M itself can be a predisposing risk factor that makes the host more susceptible to pulpal infection. The possible reasons may be that in diabetic state the lumen of pulpal blood vessels are thickened by atheromatous deposits, and microcirculation is hindered, The function of polymorphonuclear leukocyte is also impair ed and the migration of immune cells is blocked, leading to increased chance of pulpal infection. Also, lack of collateral circulation of pulpal blood vessels makes the pulp more susceptible to infection. These decrease the regeneration capacity of pulpal cells or tissues, delaying the healing process, Therefore, when restorative treatment is needed in Type 2 DM patients, dentists should minimize irritation to the pulpal tissue un der control of BGL.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.80-87
• /
• 2010

The purpose of this study was to compare the different canal irrigation methods to prevent the formation of precipitate between sodium hypochlorite (NaOCl) and chlorhexidine (CHX). Extracted 50 human single-rooted teeth were used. The root canals were instrumented using NiTi rotary file (Profile .04/#40) with 2.5% NaOCl and 17% EDTA as irrigants. Teeth were randomly divided into four experimental groups and one control group as follows; Control group: 2.5% NaOCl only, Group 1: 2.5% NaOCl + 2% CHX, Group 2: 2.5% NaOCl + paper points + 2% CHX, Group 3: 2.5% NaOCl + preparation with one large sized-file + 2% CHX, Group 4: 2.5% NaOCl +95% alcohol+ 2% CHX. The teeth were split in bucco-lingual aspect and the specimens were observed using Field Emission Scanning Electron Microscope. The percentages of remaining debris and patent dentinal tubules were determined. Statistical analysis was performed with one-way analysis of variance (ANOVA). Energy Dispersive x-ray Spectroscopy was used for analyzing the occluded materials in dentinal tubule for elementary analysis. There were no significant differences in percentage of remaining debris and patent tubules between all experimental groups at all levels (p > .05). In elementary analysis, the most occluded materials in dentinal tubule were dentin debris. NaOCl/CHX precipitate was detected in one tooth specimen of Group 1. In conclusion, there were no significant precipitate on root canal, but suspected material was detected on Group 1. The irrigation system used in this study could be prevent the precipitate formation.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.406-414
• /
• 2009

The purpose of this study was to examine the effect of hydrogen peroxide at different application time and concentrations on the microtensile bond strength of resin restorations to the deep and the pulp chamber dentin. A conventional endodontic access cavity was prepared in each tooth, and then the teeth were randomly divided into 1 control group and 4 experimental groups as follows: Group 1, non treated; Group 2, with 20% Hydrogen peroxide ($H_2O_2$); Group 3, with 10% $H_2O_2$; Group 4, with 5% $H_2O_2$; Group 5, with 2.5% $H_2O_2$; the teeth of all groups except group 1 were treated for 20, 10, and 5min. The treated teeth were filled using a Superbond C&B (Sun medical Co., Shiga, Japan). Thereafter, the specimens were stored in distilled water at $37^{\circ}C$ for 24-hours and then sectioned into the deep and the chamber dentin. The microtensile bond strength values of each group were analyzed by 3-way ANOVA and Tukey post hoc test(p < 0.05). In this study, the microtensile bond strength of the deep dentin (D1) was significantly greater than that of the pulp chamber dentin (D2) in the all groups tested. The average of microtensile bond strength was decreased as the concentration and the application time of $H_2O_2$ were increased. Analysis showed significant correlation effect not only between the depth of the dentin and the concentration of $H_2O_2$ but also between the concentration of H202 and the application time(p < 0.05), while no significant difference existed among these three variables(p > 0.05). The higher $H_2O_2$ concentration, the more opened dentinal tubules under a scanning electron microscope(SEM) examination.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Journal of Chest Surgery
• /
• v.37 no.5
• /
• pp.391-400
• /
• 2004

Xenotransplantation in discordant species results in immediate and irreversible hyperacute rejection due to natural antibodies, IgM. With this, antibody depletion is one option to reduce hyperacute rejection, we investigated the effect of PCPP (postcentrifugal plasmapheresis) on the depletion of natural antibodies and the effect of antibody titer on xenograft survival. Material and Method: Outbred swines (n=4) weighing 10∼20 kg were used as donors and mongrel dogs (n=4) weighing 25∼30 kg were used as recipients. Recipient canines underwent plasmapheresis (COBE TPE Laboratories, Lakewood. CO, USA). Pre-transplantation PCPP was peformed on day －2 and day 0. There were three groups (Group 0: no PCPP, Group 1: 1 pla sma-volume (PV) at day －2 and 2 PV at day 0, Group 2: 2 PV at day －2 and 2 PV at day 0). A swine heart was heterotopically transplanted into a recipient's abdominal infrarenal aorta and inferior vena cava. Mean percent depletion of total IgM and IgG in plasma of the recipients was calculated. Serum albumin, electrolyte, complement activity and coagulation factors were measured. Histopathologic examination of heart specimens was performed. Result: Mean percent depletion of IgM and IgG were 95.7$\pm$1.2%, 80.5$\pm$2.4% in the group 2 at the end of PCPP. The percent depletion of serum albumin concentration was decreased from 2.8 to 1.4 g/㎗ in the group 1 and 3.0 to 1.5 g/㎗ in the group 2. Complement hemolytic activity was decreased in group 1 and 2, but returned to normal level within 24 hours. Complement hemolytic activity was reduced to 10% of pre-PCPP level in group 2. Serum fibrinogen decreased to 20% or less and was recovered within 24 hours in group 2. Antithrombin III decreased but less than fibrinogen. PT and aPTT were sometimes but not always prolonged during plasmapheresis. After plasmapheresis, PT and aPTT were prolonged beyond the measurable level. D-dimer was not found during PCPP, but appeared and maintained from 10 minutes after trasplantation. Graft Survival time was 5 min in group 0, and it was 90$\pm$0 min in the group 2. Histopathologic changes were more typically characterized by edema, hemorrhages, thrombosis in all groups at the end of experiment. Conclusion: PCPP effectively removed immuoglobulins and reduced the titer of natural antibodies, as a result, significantly prololonged swine heart xenograft survival.

• Journal of Chest Surgery
• /
• v.35 no.6
• /
• pp.407-419
• /
• 2002

Atherosclerosis is a chronic inflammatory disease of the arterial wall characterized by progressive accumulation of lipids, cells, and extracellular matrix. Matrix metalloproteinases(MMPs) and tissue inhibitor of metalloproteinases(TIMPS) contribute to vascular matrix remodeling in atherosclerosis, and some cytokines may play role in the synthesis or activation of MMPs or TIMPs. Material and Method： We produced experimental atherosclerotic plaques in 9 rabbits by atherogenic hypercholesterol diet for 12 weeks, and 10 other rabbits were used as control group with standard laboratory chow, At that time, 19 rabbits were sacrificed and aorta, coronary arteries and blood specimens were prepared. The expressions of MMP-9, TIMP-2 and interleukin(IL)-18, and the bioactivity of IL-6 were investigated with H&E stain, immunohistochemical stain, immunoblotting(Western blot analysis), and bioassay. Result： Serum cholesterol in the experimental group increased up to 1258$\pm$262 mg/dL(control group： 41$\pm$7 mg/dL). All experimental group showed well-developed atherosclerotic plaques in aorta and coronary artery. The expression of MMP-9 in aorta and coronary artery of the experimental group showed significant increase than that of the control group by immunohistochemistry. Among the experimental group, complicated lesions with intimal rupture or complete luminal occlusion, demonstrated stronger expression of MMP-9. Interestingly, there was no difference in expression of TIMP-2 between the experimental and the control group. These findings were confirmed by Western blot analysis. The bioassay revealed significant up-regulation of serum bioactivity of IL-6 in the experimental group(4819.60$\pm$2021.25 IU/$m\ell$) compared to that of IL-6 in the control group(27.20 $\pm$ 12.19 IU/$m\ell$). IL-18 was expressed in all atherosclerotic plaques, whereas little or no expression was detected in the control group. Conclusion： The increased MMP-9 expression along with the unchanged TIMP-2 expression seem to be contributory factors in extracellular matrix degradation in atherosclerosis. Focal overexpression of MMP-9 may promote plaque destabilization and cause complications of atherosclerotic plaques such as thrombosis with/without acute coronary syndrome. Elevation of IL-6 and IL-18 may be more than just markers of atherosclerosis but actual participants in lesion development. Identification of critical regulatory pathway is important to improve the understanding of the cellular and molecular basis of atherosclerosis and may open the way for novel therapeutic strategies.